An introduction to solid modelling

After some preliminary definitions, we begin by describing some schemes used for representing geometry in state-of-the-art solid modeling systems. Next, we describe some of the construction and editing techniques which might be used to create geometry in such a system. Finally, we discuss the feasibility of some applications in various areas of engineering analysis and NC manufacturing.     

CRYOGENIC MACHINING OF KEVLAR COMPOSITES

Previous attempts to machine Kevlar aramid fibre reinforced plastics (KFRP) with conventional cutting tools have proven to be extremely difficult. This has somewhat restricted the material's usage, often negating the advantages of its high strength to weight ratio and fatigue tolerance. The present paper describes a novel technique of machining KFRP under cryogenic conditions with remarkable results compared to those obtained at ambient temperatures. The investigation carried out with turning operation shows dramatic improvement of the tool performance and surface quality. The effects of various machining parameters such as workpiece temperature, cutting speed and tool geometry on the machinability of KFRP are presented and analyzed. It appears that care is necessary to judge the tool life as the typical tool wear growth and surface finish or cutting force may produce contradictory results. It is also suggested that, for KFRP, surface finish of the machined workpiece is a very good criterion to determine the tool life. To aid the understanding of the machining mechanics, a microscopic investigation of the cutting zone while actually machining a testpiece at ambient and cryogenic temperatures is also reported.     

RM 8111: Development of a Prototype Linewidth Standard

Staffs of the Semiconductor Electronics Division, the Information Technology Laboratory, and the Precision Engineering Laboratory at NIST, have developed a new generation of prototype Single-Crystal CD (Critical Dimension) Reference (SCCDRM) Materials with the designation RM 8111. Their intended use is calibrating metrology instruments that are used in semiconductor manufacturing. Each reference material is configured as a 10 mm × 11 mm silicon test-structure chip that is mounted in a 200 mm silicon carrier wafer. The fabrication of both the chip and the carrier wafer uses the type of lattice-plane-selective etching that is commonly employed in the fabrication of micro electro-mechanical systems devices. The certified CDs of the reference features are determined from Atomic Force Microscope (AFM) measurements that are referenced to high-resolution transmission-electron microscopy images that reveal the cross-section counts of lattice planes having a pitch whose value is traceable to the SI meter.     

Biliary excretion mechanism of CPT-11 and its metabolites in humans: involvement of primary active transporters

After administration of CTP-11, a camptothecin derivative exhibiting a wide spectrum of antitumor activity, dose-limiting gastrointestinal toxicity with great interpatient variability is observed. Because the biliary excretion is a major elimination pathway for CPT-11 and its metabolites [an active metabolite, 7-ethyl-10-hydroxy-camptothecin (SN-38), and its glucuronide, SN38-Glu], several hypotheses for the toxicity involve biliary excretion. Here, we investigated whether primary active transport is involved in the biliary excretion of anionic forms of CPT-11 and its metabolites in humans using bile canalicular membrane vesicles (cMVs). Uptake of the carboxylate form of CPT-11 and the carboxylate and lactone forms of SN38-Glu by cMVs prepared from five human liver samples was ATP dependent. The concentration dependence of the ATP-dependent uptake of the carboxylate form of CPT-11 and SN38-Glu suggests the involvement of at least two saturable transport components, both with lower affinity and higher capacity than in rats. The ATP-dependent uptake of the carboxylate form of SN-38 showed a single saturable component but was detectable only in one human cMV sample. Both carboxylate and lactone forms of SN38-Glu uptake also showed a large intersample variability, although the variability was less than that observed for the carboxylate form of SN-38. On the other hand, the carboxylate form of CPT-11 exhibited much less variability. The carboxylate forms of SN38-Glu and SN-38 almost completely inhibited the ATP-dependent uptake of leukotriene C4, a well-known substrate of canalicular multispecific organic anion transporter, whereas the inhibition by the carboxylate form of CPT-11 was not as marked. Thus, multiple primary active transport systems are responsible for the biliary excretion of CPT-11 and its metabolites, and the major transport system for CPT-11 differs from that for the other two compounds. A greater degree of inter-cMV variability in the uptake of SN-38 and SN38-Glu may imply that interindividual variability in biliary excretion of these metabolites might contribute to interpatient variability in the toxicity caused by CPT-11.     

Effects of combined treatment with recombinant bovine somatotropin and immunization with live oocysts on performance of broiler chicks raised in coccidia-seeded floor pens

In our laboratory, preliminary studies have indicated that recombinant bovine somatotropin (rbST) can stimulate protective immunity against coccidia infection. A floor pen trial on coccidia-seeded litter was run to further test its activity as an adjuvant during immunization of chicks with a live oocyst vaccine. Five hundred day-old male broiler strain chicks were randomly assigned to five experimental Treatments: 1, medicated controls; 2, unimmunized, not treated with rbST; 3, unimmunized, rbST-treated; 4, immunized, not treated with rbST; 5, immunized, rbST-treated. Each treatment consisted of four pens of 25 chicks each. At the end of the growout period (7 wk), the chicks in Treatment 1 (medicated controls) had the highest mean BW, but mean BW of chickens in Treatment 3 (rbST treatment only) were not significantly less. On the other hand, the mean weights of chicks in Treatments 4 (immunized only) and 5 (immunized plus rbST) were significantly reduced, and not different from those of the untreated chickens (Treatment 2). However, when challenged at 3 wk, the chicks in Treatment 5 had a mean combined total lesion score that was significantly lower than that from Treatment 3, indicating that they had developed a higher degree of specific immunity, but of the expense of weight gain. The results suggest that rbST has a potential for use as an adjuvant with live oocyst vaccination, but that the ratio between rbST dose and numbers of oocysts in the live vaccine needs to be carefully controlled.     

Importance of ribosomal frameshifting for human immunodeficiency virus type 1 particle assembly and replication

The recent development and use of protease inhibitors have demonstrated the essential role that combination therapy will play in the treatment of individuals infected with the human immunodeficiency virus type 1 (HIV-1). Past clinical experience suggests that due to the appearance of resistant HIV-1 variants, additional therapeutics will be required in the future. To identify new options for combination therapy, it is of paramount importance to pursue novel targets for drug development. Ribosomal frameshifting is one potential target that has not been fully explored. Data presented here demonstrate that small molecules can stimulate frameshifting, leading to an imbalance in the ratio of Gag to Gag-Pol and inhibiting HIV-1 replication at what appears to be the point of viral particle assembly. Thus, we propose that frameshifting represents a new target for the identification of novel anti-HIV-1 therapeutics.     

Recall by expert medical practitioners and novices as a record of processing attention.

Using recall of clinical protocols as a measure of expertise in medicine has yielded disappointingly small effects. Experiments using recall of clinical laboratory data are presented to provide an explanation. In one experiment, subjects either deliberately memorized or first diagnosed and then were incidentally asked for memory. With incidental instructions, experts recalled over twice as much data as did students, but with memorization instructions, student performance approximated that of experts. Experts also showed a large advantage over students in incidental recall of data that were not relevant to the problem solution. These results suggest that expert processing in this "discrete, independent inputs" domain requires effortful analysis with minimal reliance on default values, rather than relatively effortless pattern perception reported in highly visual areas of expertise. For this area, intentional memory is a misleading measure of expertise. However, incidental memory is a valuable measure of processing during diagnosis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Double mutagenesis of a positive charge cluster in the ligand-binding site of the ferric enterobactin receptor, FepA

Siderophores and colicins enter bacterial cells through TonB-dependent outer membrane proteins. Using site-directed substitution mutagenesis, we studied ligand recognition by a prototypic Escherichia coli siderophore receptor, FepA, that binds the iron chelate ferric enterobactin and colicins B and D. These genetic experiments identified a common binding site for two of the three ligands, containing multiple positive charges, within cell surface residues of FepA. Elimination of single residues in this region did not impair the adsorption or transport of ferric enterobactin, but double mutagenesis in the charge cluster identified amino acids (Arg-286 and Arg-316) that participate in siderophore binding and function in FepA-mediated killing by colicins B and D. Ferric enterobactin binding, furthermore, prevented covalent modification of FepA within this domain by either a fluorescent probe or an arginine-specific reagent, corroborating the involvement of this site in ligand recognition. These results identify, for the first time, residues in a TonB-dependent outer membrane protein that participate in ligand binding. They also explain the competition between ferric enterobactin and the colicins on the bacterial cell surface: all three ligands interact with the same arginine residues within FepA during their penetration through the outer membrane.     

A meta-analytic investigation of cognitive ability in employment interview evaluations: Moderating characteristics and implications for incremental validity.

The purpose of this investigation was to explore the extent to which employment interview evaluations reflect cognitive ability. A meta-analysis of 49 studies found a corrected mean correlation of .40 between interview ratings and ability test scores, suggesting that on average about 16% of the variance in interview constructs represents cognitive ability. Analysis of several design characteristics that could moderate the relationship between interview scores and ability suggested that (a) the correlation with ability tends to decrease as the level of structure increases; (b) the type of questions asked can have considerable influence on the magnitude of the correlation with ability; (c) the reflection of ability in the ratings tends to increase when ability test scores are made available to interviewers; and (d) the correlation with ability generally is higher for low-complexity jobs. Moreover, results suggest that interview ratings that correlate higher with cognitive ability tend to be better predictors of job performance. Implications for incremental validity are discussed, and recommendations for selection strategies are outlined. (PsycINFO Database Record (c) 2010 APA, all rights reserved)