THE ELECTROIMPACT COMPACTION OIF POWDERS: MECHANICS, STRUCTURE AND PROPERTIES

An electroimpact compaction method recently developed for powder consolidation is described In terms of the basic principles of electric discharge and dynamic compaction processes. The influence of processing parameters, microstructural characteristics and mechanical properties of preforms obtained are discussed. Mathematical models for the mechanics of compaction, electrical resistance, discharge current variations and comparisons with experimental results are presented. The best set of properties are obtained when electrical discharge is applied to cause interparticle fusion at the instant when dynamic compaction pressure attains its peak level.     

Alumina scale growth at zirconia-MCrAlY interface: a microstructural study

High-temperature oxide scale growth at the ceramic-metal interface is a major contributor to the thermomechanical resistance of thermal barrier coatings for hot stages of gas turbines. In order to better understand this phenomenon, microstructural observations of the alumina scales formed at 1100 and 1200 °C under air, between low-pressure plasma-sprayed NiCrAlY and air plasma-sprayed ZrO₂-8.5 wt % Y₂O₃, have been performed by classical and analytical transmission electron microscopy on transverse thin foil specimens. The evolution of the oxide grain morphology from the metal-oxide to the oxide-oxide interface suggests that the scale growth principally takes place at the metal-oxide interface. Segregation of yttrium at oxide grain boundaries has been detected as well as significant quantities of zirconium inside the alumina grains. The oxide growth seems to be dominated by a classical grain-boundary oxygen diffusion mechanism. The presence of zirconium inside the alumina grains also suggests that Al₂O₃ partially forms by chemical reduction of ZrO₂ by AI. The comparison between the microstructures observed and that of alumina scales grown under similar conditions on bare MCrAlY alloys gives some insight into how the ceramic top-coat modifies NiCrAlY high-temperature oxidation mechanisms.     

Automatic recognition fingerspelling gestures in multiple languages for a communication interface for the disabled

This paper presents the design and evaluation of a multi-lingual fingerspelling recognition module that is designed for an information terminal. Through the use of multimodal input and output methods, the information terminal acts as a communication medium between deaf and blind people. The system converts fingerspelled words to speech and vice versa using fingerspelling recognition, fingerspelling synthesis, speech recognition and speech synthesis in Czech, Russian, and Turkish languages. We describe an adaptive skin color based fingersign recognition system with a close to real-time performance and present recognition results on 88 different letters signed by five different signers, using above four hours of training and test videos.     

Yttria-stabilized hafnia-zirconia thermal barrier coatings: The influence of hafnia addition on TBC structure and high-temperature behaviour

The search for more reliable and durable thermal barrier systems is a key factor for future aircraft turbine engines success. Hafnia is therefore an attractive ceramic component due to its similarity to zirconia and its elevated structural transformation temperatures. We report here structural and thermomechanical investigations of various plasma-sprayed coatings composed of ZrO₂+x mol% HfO₂ (x=0, 25, 50 and 100), partially stabilized by 4.53 mol% yttria. X-ray diffraction studies show that, a metastable, non-transformable, high yttrium content, tetragonal solid solution is the only phase observed on the as-sprayed samples. This phase is crystallographically equivalent to the t phase described for classical yttrium-partially stabilized zirconia (Y-PSZ) thermal barrier coatings (TBCs). Upon high-temperature annealing in air (T=1200C), however, the return of this t phase to equilibrium differs from the classical tt+c reaction. According to literature data, reactions of the type tt+c+m should prevail at the highest hafnia contents (x50). Indeed, important quantities of monoclinic phase are accordingly being observed upon cooling. Thermal cycling of TBC samples in air has been performed at 1100C. The Young's modulus of the ceramic coating, which progressively increases when hafnia is substituted for zirconia, has a strong influence on TBC thermomechanical resistance.     

Joint forecasts of Dow Jones stocks under general multivariate loss function

When forecasts are assessed by a general loss (cost-of-error) function, the optimal point forecast is, in general, not the conditional mean, and depends on the conditional volatility—which, for stock returns, is time-varying. In order to provide forecasts of daily returns of 30 DJIA stocks under a general multivariate loss function, the following issues are addressed. We discuss what conditions define a multivariate loss function, and a simple class of such functions is proposed. Based on suitable combinations of univariate losses, the suggested multivariate functions are convenient for practical applications with many variables. To keep the computational aspect tractable, a flexible multivariate GARCH model is employed in estimating the conditional forecast distributions. The model easily copes with large number of series while allowing for skewness, fat tails, non-ellipticity, and tail dependence. Based on Engle’s DCC GARCH, it uses multivariate affine generalized hyperbolic distributions as conditional probability law, and the number of parameters to be estimated simultaneously does not depend on the number of series. The model is fitted using daily data from 2002 to 2007 (keeping data from 2008 for out-of-sample forecasts), and a bootstrap procedure is used to derive point forecasts under several multivariate loss functions of the proposed type.     

Synthesis and evaluation of tetra(2,7-octadienyl) titanate as a reactive diluent for air-drying alkyd paints

Environmental regulations are forcing the reformulation of many decorative and protective coatings systems. In particular, air-drying solventborne alkyd paints need to meet increasingly stringent emission limits and often must be reformulated with suitable exempt solvents or reactive diluents to achieve volatile organic compound (VOC) reduction. In the research summarized in this article, a new reactive diluent, tetra(2,7-octadienyl) titanate, was synthesized and evaluated in alkyd formulations for VOC reduction and property enhancement. A soy-based long-oil alkyd resin; a soy-based high-solids, long-oil alkyd resin; and a linseed-based, high-solids long-oil alkyd resin were evaluated in combination with the new reactive diluent at weight percentages ranging from 10% to 50%. Characterization included measuring viscosity, film dry times, and film performance of the reactive diluent formulations in comparison to neat alkyd resins used as control. The tetra(2,7-octadienyl) titanate formulations consistently exhibited reduced viscosities and dry times as a function of concentration. The resulting films were harder and more thoroughly cured than the control systems.     

Optimization of some parameters of stirred mill for ultra-fine grinding of refractory Au/Ag ores

In this study, optimization of some parameters of stirred mill on ultra-fine grinding of refractory Au/Ag ores was performed. A three-level Box-Behnken design combining a response surface methodology (RSM) with quadratic programming (QP) was employed for modelling and optimization of some operating parameters in ultra-fine grinding. Grinding tests were carried out in a laboratory scale pin-type vertical stirred mill. The relationship between the response, i.e. d₈₀ size, and four grinding parameters, i.e. ball diameter, grinding time, ball charge ratio and stirrer revolution was presented as empirical model equations. Analysis of variance showed a high coefficient of determination value (R² = 0.9698), thus ensuring a satisfactory of the second-order regression model with the experimental data.The model equations were then optimized using the quadratic programming method to minimize for d₈₀ size within the experimental range studied. The optimum conditions were found to be 1.61 mm for ball diameter, 11.50 min for grinding time, 80% for ball charge ratio and 745 rpm for stirrer revolution for this grinding process.In order to verify the improvement of grinding performance using the optimal level of control factors three verification experiments were conducted, and the results for d₈₀ was 3.37 μm, which were smaller than those obtained in the initial tests.     

Supramolecular Assemblies Constructed by Cucurbituril-Catalyzed Click Reaction

Cucurbituril homologues are multi-functional macrocycles that can find applications in many areas and have numerous interesting features setting them apart from the other macrocycles. Among them, the ability of one of the cucurbituril homologues, cucurbit[6]uril (CB6), to catalyze 1,3-dipolar cycloaddition in a regiospecific fashion is truly exceptional. Using this feature, small molecules can be clicked together to form complex structures in a very efficient way. Accordingly, in this article we review recent research involving the use of CB6-catalyzed 1,3-dipolar cycloaddition or the click reaction of CB6 in the construction of supramolecular assemblies including rotaxanes, pseudorotaxanes, polyrotaxanes, polypseudorotaxanes, molecular switches, machines, and nanovalves.     

Estimation of the exposure of the French population to the BSE agent: comparison of the 1980-95 consumption of beef products containing mechanically recovered meat in France and the UK,by birth cohort and gender

Assuming that human exposure to BSE was through beef mechanically recovered meat (MRM) consumed as burgers and other meat products, we estimated the French consumption of different food items containing beef MRM, and compared these consumptions for French and British populations. To estimate consumption of meat products containing bovine MRM, we used dietary data from national individual and household food surveys conducted between 1980 and 1995. After reconciliation of consumption data between the available surveys and calendar year adjustments, we simulated consumption of one-thousandth of the French population. Consumption was estimated by birth cohort and gender, and for the periods 1980-89 and 1990-95 separately. Data showed that burgers (including manufactured minced meat) represented around 75-80% of the individual consumption of meat products containing MRM, and that consumption of burgers increased by 40% over the 1980-95 period. In all age groups, consumption was higher in males than in females. In both genders, the 1940-69 birth cohort had the highest mean consumption of burgers and other beef products containing MRM. Similar findings have been reported for the UK population. Estimated consumption of bovine MRM per calendar year increased markedly over the study period, concomitantly with an increase of bovine carcasses imported from the UK. Comparison of the 1980-1995 pattern of bovine MRM consumption in the UK and France indicated thatthis consumption peaked later in France than in the UK. This difference might result in different temporal pattern of vCJD incidence.     

Effective diffusion constant and adsorption constant of synthesized alumina,zirconia, and alumina–zirconia composite material

In this study, Al₂O₃, ZrO₂, and Al₂O₃–ZrO₂ composite materials were prepared with the sol–gel technique. X-ray diffraction analysis, differential scanning calorimetry–thermogravimetry, scanning electron microscopy–energy-dispersive X-ray spectrometry, nitrogen adsorption isotherm measurements, and helium pycnometry were used to characterize the resultant materials. Effective diffusion coefficients of helium and hydrogen and the adsorption equilibrium constant of hydrogen in the resultant materials were determined using single-pellet moment technique. The effective diffusivities of helium and hydrogen in both ZrO₂ and Al₂O₃–ZrO₂ composite pellets were found to be smaller than the value found for Al₂O_3, due to the lower tortuosity factor values of the Al₂O₃ pellet. It was found that hydrogen was weakly adsorbed on all resultant materials.