Underground mining method selection by decision making tools

Underground mining method selection is one of the most important decisions that mining engineers have to make. Choosing a suitable underground mining method to extract a mineral deposit is very important in terms of economics, safety and productivity of mining operations. In real life, underground mining method selection is one of the multiple attribute decision making (MADM) problems and decision makers have always some difficulties in making the right decision in the multiple criteria environment. Analytic hierarchy process (AHP) and Yager’s methods are the MADM tools and can be used for selection of the best underground mining method by considering the problem criteria. In this study, a computer program (UMMS) based on the AHP and the Yager’s method was developed to analyze the underground mining method selection problems and produce the best underground mining method swiftly for different deposit shapes and ore bodies.     

Adsorptive reactor technology for VOC abatement

The use of the monolith as an adsorptive reactor (M_AR) is proposed as a viable and novel alternative for VOC disposal. The M_AR combines adsorptive separation and catalytic combustion of the VOC in a single reactor unit and is thought to make effective utilisation of energy due to efficient heat integration. Theoretical studies on the feasibility and application of the adsorptive reactor concept for VOC oxidation is presented in this paper. Thus unlike previous work, present studies focus on an exothermic reaction system and the ability of the M_AR to control thermal runaway. A two dimensional mathematical model accounting for non isothermal adsorption and reaction, mass transfer limited adsorption kinetics and non linear (Tóth) adsorption equilibria, has been developed. The process is operated cyclically in two steps: adsorption and desorption/reaction. The VOC is fed into the reactor in the adsorption step and captured to produce a pure carrier gas effluent. Concentration and thermal swing is induced in the second step by means of an air feed. The most outstanding feature of the M_AR is its ability to prevent thermal runaway whilst maintaining a high VOC conversion. Simulation results indicate that the careful selection of step times for adsorption and desorption, feed temperatures and inlet velocities lead to stability and energy requirements which outperform equivalent conventional designs. The M_AR is thermally more stable due to the controlled release of the reactant from the adsorbed phase into the reaction zone, and also the heat integration of endothermic desorption and exothermic reaction.     

New tool for an ancient art: The computer and music

New tool for an ancient art: The computer and music     

Incorporating sepiolite and kaolinite to improve the performance of SPEEK composite membranes for proton exchange membrane fuel cells

SPEEK polymer based thermally crosslinked polymer membranes are prepared by sol-gel synthesis using kaolinite and sepiolite clays as additives. Characterization tests, ie, mechanical stability, thermal gravimetric analysis, ion exchange capability, swelling properties, water uptake capacities, electrochemical impedance spectroscopy analysis, and Fourier transform infrared spectroscopy (FTIR) analysis of the membranes were conducted. The sepiolite and kaolinite addition enhanced the thermal stability and the thermal crosslinking reduced the swelling capacity of the synthesized membranes. Proton conductivity results were increased from 0.172 to 0.268 S cm⁻¹ by adding 9% of kaolinite, and to 0.329 S cm⁻¹ at 80°C by adding 9% of sepiolite to the SPEEK membrane's polymer structure. The fuel cell current density and potential measurements of 141 mA cm⁻² and 84.6 mW cm⁻² were found respectively at 0.6 V for the SPEEK/S9 membrane, whereas values of 600 mA cm⁻² and 348 mW cm⁻² were found for the Nafion commercial membrane.     

Purification and characterization of an extracellular lipase from Mucor hiemalis f. corticola isolated from soil

We have screened 39 microfungi isolates originated from soil in terms of lipolytic activity. Out of all screened, a novel strain of Mucor hiemalis f. corticola was determined to have the highest lipase activity. The extracellular lipase was produced in response to 2% glucose and 2.1% peptone. The lipase was purified 12.63-folds with a final yield of 27.7% through following purification steps; ammonium sulfate precipitation, dialysis, gel filtration column chromatography and ion exchange chromatography, respectively. MALDI-TOF MS analysis revealed 31% amino-acid identity to a known lipase from Rhizomucor miehei species. The molecular weight of the lipase was determined as 46kDa using SDS-PAGE and analytical gel filtration. Optimal pH and temperature of the lipase were determined as 7.0 and 40°C, respectively. The enzyme activity was observed to be stable at the pH range of 7.0-9.0. Thermostability assays demonstrated that the lipase was stable up to 50°C for 60min. The lipase was more stable in ethanol and methanol than other organic solvents tested. Furthermore, the activity of the lipase was slightly enhanced by SDS and PMSF. In the presence of p-NPP as substrate, K(m) and V(max) values of the lipase were calculated by Hanes-Woolf plot as 1.327mM and 91.11μmol/min, respectively.     

Catalytic Liquid Phase Oxidation of Toluene to Benzoic Acid

The production of benzoic acid from toluene in the liquid phase with pure oxygen was studied. Investigations have been carried out with a view to determining the most suitable reaction conditions with respect to operating variables including oxygen flow rate, reaction temperature, batch time and catalyst loading. In a series of batch experiments carried out at 4 atm, the optimum values of mole ratio of oxygen to toluene, temperature, reaction time, and catalyst loading were found to be 2, 157 °C, 2 h and 0.57 g/L, respectively. In addition, a kinetic study was carried out by taking into consideration the optimum reaction conditions. The model dependent on the formation of benzyl radical was found to be feasible for describing the catalytic oxidation of toluene to benzoic acid in the liquid phase. The activation energy was determined as 40 kJ/mol.     

Calorimetric estimation for a batch-loop emulsion polymerisation reactor

To facilitate the online monitoring and control of a pilot-scale polymerisation reactor, state estimation techniques are investigated. Specifically, a batch-loop reactor is employed for the emulsion polymerisation of methyl methacrylate. The reactor consists of jacketed tubular sections fitted with in-line static mixers, thus providing mixing homogeneity and improved temperature control. A direct estimation of the reaction rate is attained through measurements of process and jacket side temperatures, and thus a calorimetric method of estimation. This is compared with a Kalman filter based calorimetric approach, in which there is compensation for model uncertainties and measurement noise. For both estimation methods, no knowledge of the kinetic model for polymerisation is needed. Experimental results indicate that with an accurate model of the process energy balance, in which, for example, the recycle pump energy input is described, the Kalman filter approach is found to provide excellent prediction of conversion, for both high and low conversions, for this pilot-plant reactor system. The approach does not require any (approximate) kinetic knowledge, and is thus considerably easier in implementation than the extended Kalman filter approaches.     

Interpolation and approximation of quasiseparable systems: the Schur-Takagi case

Abstract We explore how the classical Schur-Takagi interpolation theory as developed by Chamfy, Krein and Langer and Alpay, Azizov, Dijksma, and Langer generalizes to the matrix/operator case in the context of quasiseparable representations. A surprising result is that the generic case in the classical theory is no longer generic for the matrix case; it becomes a rather rare special case. This confirms again the general statement that the non-stationary case is essentially different from the index- or time-invariant case in contrast to common opinion.     

Determination of sampling errors in natural stone plates through Single Linkage Cluster Method

In this study, the variations in the thicknesses of the plates cut from natural stone blocks with a circular saw block cutter machine have been investigated using Range (R) control charts. Erratic data caused by sampling errors in range values were encountered when these charts are examined. Erratic data among the range values were determined by Single Linkage Cluster Method and were eliminated from the processes. After the erratic data were sorted out, the parameters concerning the R control charts were recalculated and the charts were reconstructed. Using the reformed R control charts, it was shown that the processes are better than the previous R control charts. Finally, it was determined that the erratic data caused by sampling errors could reliably be estimated by the Single Linkage Cluster Method.     

Compositionally graded ferroelectric multilayers for frequency agile tunable devices

Recently, there has been significant interest toward the development of tunable dielectric materials for voltage-controlled, frequency-agile phase shifters and filters operating in the microwave regime. The fundamental challenge in designing materials systems for such tunable devices is the simultaneous requirement of high dielectric tunability (>40%) over a large temperature interval (−10 °C to +90 °C) coupled with low dielectric losses (between 3.0 dB and 4.0 dB in operational bandwidths ranging from several hundred MHz up to 30 or more GHz). We show that a high- and temperature-insensitive tunability can be realized in compositionally graded ferroelectrics and provide a brief review of the results of experimental and theoretical studies on the dielectric properties of Barium Strontium Titanate (Ba_1−x Sr _x TiO₃ or BST) multilayer heterostructures. Theoretically, we discuss the role of thermal stresses on the dielectric properties using a non-linear thermodynamic model coupled with basic electrostatic considerations to describe the interlayer interactions between the ferroelectric layers. We show that the thermal strains arising from the thermal expansion coefficient mismatch between the multilayered film and the substrate may have a significant effect on the dielectric permittivity and tunability of BST multilayers. Experimentally, compositionally graded BST multilayers (5 mol% MgO doped and undoped) were grown via metallo-organic solution deposition (MOSD) on Pt–Si substrates and electrically characterized. Optimum conditions were found to exist in BST multilayers consisting of three distinct layers of ~220 nm nominal thickness with compositions corresponding to Ba_0.60Sr_0.40TiO₃ (BST 60/40), BST 75/25, and BST 90/10. At room temperature, the BST heterostructure has a small-signal dielectric permittivity of 360 with a dissipation factor of 0.012 and a dielectric tunability of 65% at 444 kV/cm. These properties exhibit minimal dispersion as a function of temperature ranging from 90 °C to −10 °C. Our results also show that MgO doping improves dielectric loss (tan δ = 0.008), but results in a moderate dielectric tunability of 29% at 444 kV/cm. Electrical measurements at microwave frequencies display a decrease in the dielectric permittivity and tunability for both undoped and MgO-doped BST multilayers. At 10 GHz, the dielectric response, tunability, and the loss characteristics for graded undoped BST are 261, 25% (at 1,778 kV/cm), and 0.078, respectively, and 189 and 15% (at 1,778 kV/cm), and 0.039, respectively, for the MgO-doped graded BST.