Solar drying of sawn lumber in Spain

A solar heated experimental drying kiln was installed in Madrid (INIA-Forest Industries Department) to study the efficiency of solar drying of sawn lumber in Spain, as compared with normal air drying. The kiln has been designed as a low cost semi-greenhouse type, but was equipped with a semi-automated control of the drying schedules. The performance of the solar kiln has been studied during ten test runs over a period of two years particularly with respect to drying rate, initial and final wood MC, reliability and efficiency. The results have proven that the solar kiln is capable of drying (economically) from an initial moisture content of 70 to 80%, to a final MC of 8 to 10% up to 3.5 times faster than air drying. With respect to checks, splits and internal stresses, the final wood quality is mostly better, not only compared to normal air drying but also to conventional kiln drying.     

Measurement of IP3 in p-i-n photodetectors and proposed performancerequirements for RF fiber-optic links

The nonlinearities generated by wide-band, high-current photodetectors are discussed in the context of the performance of an externally modulated analog radio-frequency fiber-optic link. The quantitative impart of the detector's third-order intermodulation product intercept (IP3) on the link's spur-free dynamic range is analyzed. Waveguide p-i-n photodiodes were developed to specifically address these stringent IP3 goals. The IP3 was measured using a four laser heterodyne system resulting in an IP3 of 27 dBm measured at a center frequency of 20 GHz with 20 mA of de photocurrent. The authors believe that this is the highest photodetector IP3 reported to date at these operating conditions     

Effect of addition of cryoprotectants on the mechanical properties, colour and sensory attributes of fresh and frozen/thawed mashed potatoes

Cryoprotectants such as hydrocolloids (amidated low-methoxyl (ALM) and high methoxyl (HM) pectins), kappa- and iota-carrageenans (k-C and i-C), xanthan gum (XG)) and dairy proteins [whey protein (WP), sodium caseinate (SC)] were added to mashed potatoes to investigate ways of improving the effects of freezing and thawing. It was found that each hydrocolloid and protein, depending on concentration, affected the mechanical properties [instrumental textural profile analysis (ITPA), cone penetration (CP) test], the total colour difference (ΔE*) with respect to fresh control (FC) and the sensory attributes of fresh (F) and frozen/thawed (F/T) mashed potatoes in a different way. In the F/T samples, adding 5 and 8 g kg⁻¹ ALM, 3, 5 and 8 g kg⁻¹ k-C, 1.5, 3, 5 and 8 g kg⁻¹ i-C and 1.5, 5 and 15 g kg⁻¹ WP significantly increased ITPA consistency. Also, adding 2.5 and 5 g kg⁻¹ XG significantly increased ITPA consistency of the F/T product. In both F and F/T samples, k-C provided the highest ITPA consistency and also high CP average force evidencing a stronger synergistic effect in κ-C/denatured milk protein systems, although the excessive thickening and stickiness provided was judged undesirable by the panellists. Adding 8 g kg⁻¹ HM pectin had a disruptive effect on the mashed potatoes and decreased both ITPA consistency and CP average force. In all cases, freezing and thawing reinforced the gel structure of the products as compared to F and FC counterparts. The ΔE* values were higher in F samples containing ALM and HM pectins. Dairy proteins affected the taste and odour of the mashed potatoes and were judged unacceptable in the sensory analysis. Samples containing 0.5 and 1.5 g kg⁻¹ added XG were preferred organoleptically due to the creamy mouthfeel it produced. ITPA consistency correlated well with sensory texture attributes.     

Incorporation of a tungsten Fischer-type metal carbene covalently bound to functionalized SBA-15

A metal Fischer carbene [(CO)₅WC(φ)OCH₂CH₃] was covalently linked for the first time to the silanol groups of the mesoporous channels of SBA15 by following two different synthetic anchoring routes. The first one goes through the reaction of the SBA15 mesoporous silica walls functionalized by aminopropyltriethoxysilane (APTES) with a tungsten carbene Wφ, while in the second approach a precursor synthesized by reacting APTES with the carbene Wφ is then anchored via a direct bond to the silanol groups in the interior pore channels of SBA-15.

This tethering is helpful to prevent the decomposition of the metallic complex. XRD, N₂ adsorption–desorption, and TEM analysis provide strong evidence that the mesoporous support structure retains its long-range ordering after the grafting process, despite a significant reduction of its specific surface area, pore-volume and pore-size. The chemical bonding of the tungsten carbene to the silanol groups of SBA-15 materials was studied with solid-state NMR spectroscopy. Both ¹³C MAS NMR and ²⁹Si CP MAS NMR spectra confirm the covalent linking of the carbene to the silica-pore system.     

The influences of carcass weight and depot on the fatty acid composition of fats of suckling Manchego lambs

The effects of carcass weight (<5.5 kg, 5.5–6.5 kg, ⩾6.5 kg) of Manchego suckling lambs, type of fat depot of the leg (subcutaneous, intermuscular and intramuscular) and muscle (m. longissimus dorsi (LD) or m. quadriceps femoris (QF)) on the fatty acid composition were studied. Carcass fatness increased with increasing carcass weight. However, few differences in fatty acid proportion were observed between the three carcass weight groups. The lightest carcasses had lower proportions of myristic (C14:0) and palmitoleic (C16:1) acid and higher proportions of stearic (C18:0) acid, desirable fatty acids (DFA) (C18:0 + total unsaturated fatty acid (TUFA)) and a greater nutritive value ((C18:0 + C18:1)/C16:0). The fatty acid composition of subcutaneous and intermuscular fat depots of the leg were similar, whereas the intramuscular fat depot was different from both of these, since it had a lower proportion of saturated fatty acids (SFA), a greater proportion of TUFA, higher PUFA/SFA and n − 6/n − 3 ratios, and greater DFA and nutritive values. The intramuscular fat of the LD was more saturated than QF, higher SFA, and had lower value of PUFA/SFA ratio and DFA. These results indicated that the intramuscular fat quality of the leg was better than subcutaneous and intermuscular fat depots and also that intramuscular fat displayed better attributes of quality (lower SFA, higher TUFA, and greater PUFA/SFA ratio and DFA as well) than intramuscular fat of the LD from the consumer health standpoint. Despite carcass weight affected carcass fatness, it did not seem to influence the proportions of saturated or polyunsaturated fatty acids. For this reason, carcass weight probably had little effect on the organoleptic characteristics of the meat.     

A comparison of various rheological properties for modelling the kinetics of thermal softening of potato tissue (c.v. Monalisa) by water cooking and pressure steaming

The kinetics which can be used to describe thermal softening of potato tissue by water cooking and pressure steaming were established and the temperature dependence of rheological and textural properties, using six different instrumental objective methods as firmness indicators, was determined within the temperature range of 100–122 °C. In water cooking at 100 °C and in steaming at 100, 112 and 117 °C, the thermal softening was best expressed by one simple pseudo first-order kinetic mechanism, which was considered to be the response to the changes in the pectic material in the cell wall and interlamellar region. Tension energy was the best rheological property for establishing the kinetics of softening of potato by water cooking, whereas maximum shear force was the best method of representing the tissue softening by steaming, using first-order models. Steaming at 122 °C caused overcooking of the tissue, even for short times. At this high temperature, rheological parameters (compression, tension and creep compliance) and textural properties from Texture Profile Analysis (TPA) fitted second-order models. When second-order models were used, the Arrhenius equation was significant for chewiness, indicating that this textural property can be useful for detecting overcooking caused by prolonged pressure steaming in the experimental temperature range.     

The effect of the pre-treatments and the long and short-term frozen storage on the quality of raspberry (cv. Heritage)

Results are presented of the effect of pre-treatments before freezing followed by long and short-term frozen storage (12 months at –18 °C and 24 days suffering temperature fluctuations between –18 °C and –12 °C) on quality parameters of raspberry. Pre-treatments were carried out with calcium, low methoxyl pectin, a combined solution, and results compared with untreated control fruits. Kramer shear, back extrusion, compression, and multiple penetration tests were used to measure rheological behavior. One-hundred mM CaCl₂ reduced the long and short-term frozen storage induced loss of firmness. For long-term storage at –18 °C, a softening of the tissue became evident between 3 and 12 months and at each date test the stored fruits were firmer than those without storage. For short-term storage with fluctuations, the loss of firmness was evident between 0 and 24 days, and at all the testing dates the stored fruits were softer than those without storage. Results evidenced a higher cell damage in the short-term frozen storage. Coefficients of softening per day suffering fluctuation were determined, the highest values being given by Kramer shear energy and back extrusion maximum force (>1%). Short-term frozen storage affected physical and physico-chemical characteristics, increasing the saturation (r) and the anthocyanins and decreasing the ascorbic acid of the raspberries. In both storage conditions, pre-treatments reduced the drip loss, which correlated best with the Kramer shear energy. Panelists detected mainly time effect on the sensory firmness. For long-term, sensory firmness and juiciness gave the highest correlations with back extrusion maximum force, while for the short-term, sensory firmness and drip loss gave the highest correlations with the Kramer shear energy. SEM revealed different degrees of mechanical damage to structure, which accounted for rheological behavior of the fruits.     

Immunoadjuvant activity of oral Lactobacillus casei: influence of dose on the secretory immune response and protective capacity in intestinal infections.

Lactobacilli, often used as effectors of host functions, could play an important role in maintaining human health by controlling other intestinal microorganisms capable of producing harmful effects. Using an experimental model, we studied the effect of different oral doses of Lactobacillus casei on the secretory IgA response and the protective capacity of the microorganism in preventing intestinal infections. The optimization of the protective dose of Lb. casei by previous feeding and the use of the lactobacillus as an immunological way to control enteric infections were investigated. We found that conventional mice were protected against infection with Salmonella typhimurium and Escherichia coli by previous feeding for 2 consecutive days with a daily Lb. casei dose of 1.2 x 10(9) cfu/mouse. Previous feeding for 7 d proved less effective, and feeding for 5 d afforded no protection at all. We were also able to demonstrate that the protective effect of Lb. casei against Sal. typhimurium and Esch. coli was connected mainly with the high level of IgA antipathogen antibodies present in intestinal secretions. beta-Glucuronidase (EC 3.2.1.31) and beta-galactosidase (EC 3.2.1.23) activities, measured both in the intestinal fluid and histological samples, showed a marked increase in intestinal inflammatory response on day 5 of feeding. These results show that Lb. casei plays an important role in the prevention of enteric infections, a low dose being enough for protection against intestinal infections by increasing IgA secretion into the intestinal lumen, thus providing adequate defences for the mucosal surface. A previously administered dose of this magnitude could therefore be used as an oral adjuvant in preventing enteric infections.     

The Effect of Antibrowning Agents on Inhibition of Potato Browning,Volatile Organic Compound Profile,and Microbial Inhibition

Abstract: Burbank and Norkotah potato slices were dipped into 3% sodium acid sulfate (SAS), citric acid (CA), sodium erythorbate (SE), malic acid (MA), sodium acid pyrophosphate (SAPP), or a combination of SAS‐CA‐SE. Browning by polyphenol oxidase (PPO) obtained from potato extract with 0.04 to 0.016 g/mL of antibrowning solutions at pH 2.0 to 6.9 were measured by UV‐Vis spectroscopy. The color of slices dipped in antibrowning solutions at pHs 2 to 7 and stored at 4 °C for 15 d was measured every 5 d by colorimeter. Headspace analysis of volatiles in raw and cooked potato samples was performed by selected ion flow tube mass spectrometer (SIFT‐MS) and soft independent modelling by class analogy (SIMCA) analysis of the calculated odor activity values (OAV) determined interclass distances. Microbial growth was measured at 15 d. At unadjusted pHs (1.1 to 7.1), the PPO browning of the control and samples with SAPP was not significantly different, SAS, CA, and MA produced some inhibition and SE and SAS‐CA‐SE prevented browning. At pH 5 to 7, only SE and SAS‐CA‐SE were effective browning inhibitors. Based on the color of potato slices, SE was the most effective at pH 2 to 7, but SAS was most effective at unadjusted pH. Cooking increased volatile levels in the treated potatoes and decreased differences between volatile profiles. Differences between cooked samples may not be noticeable by the consumer because volatiles with high discriminating powers have low OAVs. SAS, CA, and SAS‐CA‐SE treatments inhibited microbial growth but SAPP, control, and SE did not, most likely due to pH. Practical Application: Antibrowning agents inhibit polyphenol oxidase, increasing shelf life and consumer acceptability of processed raw potato products by preserving the color. Their effectiveness was shown to be mainly due to a pH effect, except SE, which was not pH dependent. MA, CA, and SAS‐CA‐SE are better acidulants for inhibition of color change as well as growth of spoilage bacteria, yeast, and mold than SAPP, the industry standard.