A New Generation of Steels for Metallic Structures

Metal Science and Heat Treatment -     

Mesh network resiliency using GMPLS

The generalized multiprotocol label switching (GMPLS) is being developed as the control plane for the evolving photonic network. We describe how GMPLS can be used with mesh networks to provide efficient network resiliency. In particular we examine the key aspects of GMPLS that are used to support protection and restoration. We also study the various protection and restoration techniques, and we highlight the tradeoffs between recovery time and resource redundancy     

ISOFLUX膜——微滤膜极品

介绍一种新型的恒通量的微滤膜———ISOFLUX 膜 ,该种膜的膜通量衰减比通常的微滤膜要小得多 ,对ISOFLUX 膜的原理和数学模型进行了推导 ,并给出了对牛奶进行冷杀菌过滤的结果 .     

Preliminary<Emphasis Type="Italic">in vitro</Emphasis> and<Emphasis Type="Italic">in vivo</Emphasis> characterizations of a sol-gel derived bioactive glass-ceramic system

This study investigates quantitatively and qualitatively the sol-gel derived bioactive glass-ceramic system (BGS)—apatite-wollastonite (AW) type granules in the size range of 0.5–1 mm, as an effective graft material for bone augmentation and restoration. Scanning electron micrographs (SEM) of the sintered granules revealed the rough material surface with micropores in the range 10–30 μm. X-ray diffraction (XRD) pattern of the granules revealed the presence of crystalline phases of the hydroxyapatite and wollastonite, and the functional groups of the silicate and phosphates were identified by Fourier transform infrared spectroscopy (FT-IR). Thein vitro cell culture studies with L929 mouse fibroblast cell line showed very few cells adhered on the BGS disc after 24 h. This could be due to the highly reactive surface of the disc concomitant with the crystallization but not due to the cytotoxicity of the material, since the cellular viability (MTT assay) with the material was 80‰ Cytotoxicity and cytocompatibility studies proved that the material was non-toxic and biocompatible. After 12 weeks of implantation of the BGS granules in the tibia bone of New Zealand white rabbits, the granules were found to be well osteointegrated, as observed in the radiographs. Angiogram with barium sulphate and Indian ink after 12 weeks showed the presence of microcapillaries in the vicinity of the implant site implicating high vascularity. Gross observation of the implant site did not show any inflammation or necrosis. SEM of the implanted site after 24 weeks revealed good osteointegration of the material with the newly formed bone and host bone. New bone was also observed within the material, which was degrading. Histological evaluation of the bone healing with the BGS granules in the tibial defect at all time intervals was without inflammation or fibrous tissue encapsulation. After 2 weeks the new bone was observed as a trabeculae network around the granules, and by 6 weeks the defect was completely closed with immature woven bone. By 12 weeks mature woven bone was observed, and new immature woven bone was seen within the cracks of the granules. After 24 weeks the defect was completely healed with lamellar bone and the size of the granules decreased. Histomorphometrically the area percentage of new bone formed was 67.77% after 12 weeks and 63.37% after 24 weeks. Less bone formation after 24 weeks was due to an increased implant surface area contributed by the material degradation and active bone remodeling. The osteostimulative and osteoconductive potential of the BGS granules was established by tetracycline labelling of the mineralizing areas by 2 and 6 weeks. This sol-gel derived BGS granules proved to be bioactive and resorbable which in turn encouraged active bone formation.     

Mechanical and microstructure studies on the modification of CA film by blending with PS

DriedMusa paradiciaca (banana) stem and veins of the leaves, which were hitherto discarded as a waste, were collected and used as starting material for the preparation of cellulose and cellulose acetate. This cellulose acetate was mixed with polystyrene to form blend of cellulose acetate-polystyrene in order to provide enhanced stability and extended utility to the end products. The films of these composites or their individual partners were made separately and studied for their mechanical properties, chemical modification and morphological changes. We report here that banana stem is good source of cellulose and that cellulose completely undergoes modification upon esterification.     

Response mechanism of SiC-based MOS field-effect gas sensors

SiC-based field-effect gas sensors with catalytic platinum electrodes (Pt-MOSiC) have been subjected to a series of gas response measurements. Structural analysis of the Pt electrodes revealed that the gas sensitivity and the selectivity of Pt-MOSiC gas sensors depend on two major parameters: the porosity and the catalytic activity of the Pt electrodes. Pt-MOSiC gas sensors with thick, dense Pt electrodes only exhibit hydrogen sensitivity, whereas Pt-MOSiCs with thin porous gates exhibit a broad range of gas sensitivities similar to resistive metal-oxide gas sensors. A model is put forward that explains the nonhydrogen gas response of Pt-MOSiC devices and of conventional polycrystalline metal-oxide materials on a common basis.     

Reaction of zirconium fluoride glass with water: kinetics of dissolution

When liquid water contacts a zirconium-barium-lanthanum fluoride glass, at least three different processes occur. Barium and zirconium fluoride dissolve into the water, water penetrates into the glass, and zirconium fluoride crystals grow on the glass surface, in static solution. The rate of dissolution, as measured by solution analysis, is possibly controlled by diffusion in the solid surface; surface blockage and surface reactions are other possible kinetic steps involved. Diffusion in solution is not the controlling mechanism. Hydrogen profiles in the glass surface suggest that the penetration rate of water into the glass is controlled by diffusion and a surface reaction.     

Evolution of an instinct under long-term divergent selection for geotaxis in domesticated populations of Drosophila melanogaster..

Describes long-term divergent selection for geotaxis in lines of the fruit fly. After 26 yrs (600+ generations) of intermittent selection, the initial experimental procedure showed that the mean geotactic scores remained stable on relaxed selection, a result suggesting that evolutionary changes had occurred in these lines. Because the stability was not due to genetic fixation (homozygosity) of the lines, it is concluded that it was due to either (a) close linkage of genes associated with geotaxis (which would not result in enduring change) or (b) the development of new coadapted gene complexes utilizing genes associated with extreme geotaxis expression (which should result in enduring change). Better evidence for the latter hypothesis was obtained, during the 2nd experimental procedure, from the low- than the high-geotaxis line. The notions of coadaptation and genetic homeostasis are considered, as well as the prospective use of the geotaxis lines to study such concepts experimentally. The geotactic behavior expressed in each line is defined as instinctive: It increases reproductive success and is characteristic of a population. (30 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Microsomal and photochemical oxidation of aflatoxin B1

The UV irradiation (lambda = 362 nm) of aflatoxin B1 (AfB1) dissolved in water resulted in the formation of an oxidized product. The process was not inhibited by ionol, a routine inhibitor of the radical processes. The oxidized product was not found in the system where AfB1 was metabolized by the 3-methylcholanthrene-activated rat liver microsomes. It is suggested that the product is identical with 2,3-dihydrodiol of AfB1.     

Optimum design of steel frames with stability constraints

Optimum design algorithms based on the optimality criteria approach are proven to be efficient and general. They have the flexibility of accomodating variety of design constraints such as displacement, stress, stability and frequency in the design problem. The design methods developed recently, although considering one or more of these constraints, lack the necessity of referring to any relevant design code. The algorithm presented for the optimum design of street frames implements the displacement and combined stress limitations according to AISC. The recursive relationship for design variables in the case of dominant displacement constraints is obtained by the optimality criteria approach. The combined stress inequalities which include in-plane and lateral buckling of members are reduced into nonlinear equations of design variables. The solution of these equations gives the values of bounds for the variables in the case where the stress constraints are dominant in the design problem. The use of effective length in the combined stress constraints makes it possible to study the effect of the end rigidities on the final designs. The design procedure is simple and easy to program which makes it particularly suitable for microcomputers. A number of design examples are considered to demonstrate the practical applicability of the method. It is also shown that the design procedure can be employed in selecting the optimum topology of steel frames.