Accommodation and convergence in integral imaging 3D display

In this paper, we analyze the visual fatigue of integral imaging three‐dimensional (3D) display by studying the accommodation and convergence when viewing the integral imaging 3D images. The theoretical analyses show that there is no inconsistency between the accommodation and convergence distances, which means that the integral imaging 3D display has no visual fatigue. Experiments are implemented, and the results finally demonstrate the rationality of the theoretical analyses. These analyses can be quite beneficial for researchers to better understand the performances and promote the practical applications of the integral imaging 3D display.     

Measurement of minimum angle of resolution (MAR) in the stereoscopic display using the optotype of stereoscopic stimuli

In stereoscopic images, the crossing point of the viewing directions of the two eyes determines the perceived depth. Assuming that accommodation is affected by the positions of the crossing point, the effect of crossing point on minimum angle of resolution (MAR) was investigated. For 40 participants, MAR was measured by two‐alternative forced choice where Snellen optotype E of up and down directions were used as two kinds of stimuli. As the crossing point of the viewing direction of the left and right eyes moves farther from the sample display, the ability to identify the direction of letter E decreases at the optotype of the same line thickness. The change of MAR shows linear trends with respect to the optical power change that are the reciprocal of the distance from the participant to the crossing points located out of screen and on screen.     

Oil thermal annealed nano‐structured indium tin oxide thin films for display applications

Indium tin oxide‐coated thin films (200 nm) are deposited on glass substrates by using R.f. sputtering technique. Here, we investigate the influence of new technique of treatment, which is called as “oil thermal annealing” on the nano‐structured indium tin oxide thin films at fixed temperature (150 °C) which improves adhesion strength, electrical conductivity and optical properties (transmittance) of the films. Oil thermal annealing is used to reduce inherent defects that may be introduced during the prepared thin film and cooling processes. Proposed technique is highly suitable for liquid crystal displays, solar cells and organic light emitting diodes, and many other display‐related applications.     

Visual experience for autostereoscopic 3D projection display

In order to investigate visual experience for watching the autostereoscopic three‐dimensional (3D) projection display, we conduct a subjective evaluation experiment by a questionnaire when viewing video clips. Factor analysis is adopted to classify the evaluation items for the perpetual constructs of visual experience. Then a mixed design with repeated measurement analysis of variance with dimension and display duration as factors is carried out on the evaluation data to check the factorial effects and interactions for statistical significance. The results of factor analysis extract five factors including visual comfort, image quality, distortion, naturalness, and presence, which can be used as comprehensive indicators to evaluate the autostereoscopic 3D projection display. The results of analysis of variance indicate that image quality, which is used to assess two‐dimensional contents, is no longer applicable. It is necessary to give consideration to depth when evaluating 3D visual experience. Although 3D scenes enhance the overall subjective performance such as naturalness and presence, the health issues and stereoscopic distortion related to the introduction of depth cannot be ignored.     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

A low‐profile antenna with circularly polarized reconfigurable and omnidirectional radiation patterns

A low profile circularly polarized (CP) antenna with reconfigurable polarization is designed and presented, which can radiate omnidirectional patterns that can be switched between left‐hand circularly polarized (LHCP) and right‐hand circularly polarized (RHCP). A pair of arc‐shaped complementary dipoles is acted as reconfigurable elements by bridging four pin diodes at the dipole arced arms. A meander phase shift line is employed to connected the arc dipole arms and plate cavity to adjust the phase relationship of two sources. The proposed antenna exhibits the omnidirectional radiation pattern by combining six identical elements placed in a circular array configuration. 24 p‐i‐n diodes are exploited to six elements, by manipulating the dc bias voltage across the diodes, the polarization state of the antenna can be switched. The patterns of the antenna are similar to that of a dipole, but its size is only about Φ0.87 × 0.029λ₀ at 5.8 GHz. The overlapped bandwidth of measured 3‐dB axial ratio (AR) and 10‐dB return loss is 5.724‐5.87 and 5.738‐5.91 GHz for two polarization states, which are right on the target of ISM band. It can be well adapted to medical diagnosis systems.     

A pair of parallel differential magnetic‐field probes with high measurement accuracy and high electric‐field suppression ratio

Magnetic‐field probes can be used for electromagnetic interference measurement of high‐speed circuits. The main magnetic probe performance includes sensitivity, spatial resolution, electric‐field suppression ratio (EFSR), and measurement accuracy. In this article, a pair of differential magnetic‐field probes is proposed to improve measurement accuracy without reducing sensitivity. The proposed differential probes consist of two asymmetric loop probes, which are designed in the same plane and separated by a row of periodic vias. The proposed differential probes are fabricated under PCB process. High accuracy can be achieved by measuring difference between outputs of the two probes. In addition, EFSR can be improved by size optimization of the differential magnetic‐field probes. Simulation and measurement results show the operating bandwidth is from 100 MHz to 12 GHz, the measurement error is 3.4% and the EFSR is about 40 dB. The proposed probes have higher measurement accuracy and higher EFSR than the conventional single probe, and larger operation bandwidth than the stacked differential probes.     

Design of a broadband dielectric resonator antenna and its application in low sensitivity frequency beam‐scanning array with wide scanning angle and suppressed sidelobes

In this paper, a broadband dielectric resonator antenna (DRA) with a simple H‐slot feeding structure is proposed. The broad bandwidth (~45%) and uni‐directional radiation enable this DRA suitable to work as a radiation element in the construction of a beam‐scanning array with not only low frequency sensitivity which is important for accurate angle estimation of in‐coming targets, but also a wide scanning range. Moreover, stable coupling coefficients are established around all the above three resonances with respect to its corresponding feeding line, ensuring a low sidelobe level (SLL) across the whole operating frequency range. In order to realize such a DRA, a latticed rectangular structure is utilized to generate the lower two resonances, while the upper resonance is generated by its H‐shaped feeding slot. The shape of the latticed dielectric resonator is also modified according to a 3‐D printed fixing structure for an accurate installation. A 20‐element beam‐scanning prototype is demonstrated and manufactured. The range of scanning angle is from ?36° to +13° within the bandwidth of 10 to 16 GHz, corresponding to a frequency sensitivity of only 122.5 MHz/^o. The achieved SLL are smaller than 19 dB for all scanning beams. The above performance indicates that, this array is very suitable for near‐range radar systems requiring an accurate angle estimation.     

Guaranteeing performance for uncertain nonlinear systems with bounded state constraint and mismatching condition

The control design problem for the uncertain nonlinear system with bounded state constraint and mismatching condition is considered in this paper. The uncertainty in the system, which may be due to unknown system parameters and external disturbance, is nonlinear and time‐varying. The state of the system is constrained to be bounded. The system does not satisfy the (global) matching condition. A creative one‐to‐one state transformation is proposed by converting the bounded states into the unbounded ones. A step‐by‐step state transformation is proposed to convert the mismatched system into a matched system. The robust control is then proposed based on the transformed system. The control is demonstrated to be able to guarantee the uniform boundedness and uniform ultimate boundedness of the system in the presence of uncertainty, while the state constraint can be always guaranteed.     

Hierarchical inversion‐based output tracking control for uncertain autonomous underwater vehicles using extended Kalman filter

In this study, a hierarchical inversion‐based output tracking controller (HIOTC) is developed for an autonomous underwater vehicle (AUV) subject to random uncertainties (e.g., current disturbances, unmodeled dynamics, and parameter variations) and noises (e.g., process and measurement noises). The proposed HIOTC respectively utilizes a combination of feedforward and feedback controls in a hierarchical structure based on the kinematic and dynamic models of the system. Moreover, to obtain uncontaminated or unavailable states for implementing the proposed control law, the extended Kalman filter (EKF) is employed to estimate the system states. Then, the position outputs, orientation, and velocity of the AUV are reached with guaranteed asymptotic stability. The robustness of the proposed HIOTC is verified through injection of random uncertainties into the system model. The closed‐loop stability of the proposed individual subsystems is respectively guaranteed to have uniformly ultimately bounded (UUB) performance based on the Lyapunov stability criteria. In addition, the asymptotic tracking of the overall system is demonstrated using Barbalat's lemma. Finally, the feasibility and effectiveness of the proposed control scheme are evaluated through computer simulations and it is shown that the overall system achieves good asymptotic tracking performance.