Effect of Nd3+ substitution on structural and magnetic properties of Mg–Cd ferrites synthesized by microwave sintering technique

Nd~(3+) substituted spinel ferrites with formula Mg_xCd_(1-x)Nd_(0.03)Fe_(1.97)O_4(x = 0.0.2,0.4,0.6.0.8 and 1.0)were prepared by oxalate co-precipitation method using novel microwave sintering technique. AR grade sulphates were used as starting chemicals. The samples were sintered at optimized power of 70 W for10 min in a microwave oven(800 W). The structural analysis of these samples was done by using X-ray diffraction, scanning electron microscope and Fourier transform IR techniques. The XRD analysis of the synthesized ferrite confirms the formation of cubic spinel structure of ferrite. The influence of Nd3+substitution on various structural parameters of Mg-Cd ferrites was reported. IR study indicates the spectra contain two intense absorption bands around 600 and 400 cm~(-1) in addition with four extra bands. The magnetic properties of all ferrites were studied by using a vibration sample magnetometer.The crystallite and grain size dependant magnetic properties are observed. The composition Mg_(0.6)Cd_(0.4)Nd_(0.03)Fe_(1.97)O_4 has better magnetic properties that can be used in recording media. The fast synthesis of spinel ferrites is yielded due to use of the microwave sintering technique.     

Effect of diethyl ether blended with neem oil methyl esters in CI engine

Vegetable oils are now considered to be a potential alternative that can be used in place of partial or total substitution of diesel fuels. In this study, we used diethyl ether as an oxygenated additive to investigate the possible use of higher percentages of biodiesel in an unmodified diesel engine. Neem oil was selected for biodiesel production. The tests were performed at a steady-state condition in a single-cylinder constant speed DI diesel engine. The combustion process involved in diesel engine would be improved and the particulate matter would be reduced if these biodiesels are blended. An experimental investigation is carried out to establish the emission characteristics of a direct injection diesel engine using diethyl ether as additive in Neat Neem oil Biodiesel. Emissions of hydro carbon oxides of nitrogen and carbon monoxide significantly reduced by adding diethyl ether into neem oil biodiesel at 10% and 20% on volume basis.     

Green microalga Chlorella vulgaris as a potential feedstock for biodiesel

BACKGROUND: A major bottleneck in microalgal biodiesel production is lipid content, which is often low in microalgal species. The present study examines Chlorella vulgaris as a potential feedstock for biodiesel by identifying and evaluating the relationships between the critical variables that enhance the lipid yield, and characterizes the biodiesel produced for various properties. RESULTS: Factors affecting lipid accumulation in a green microalga, Chlorella vulgaris were examined. Multifactor optimization raised the lipid pool to 55% dry cell weight against 9% control. When C. vulgaris cells pre‐grown in glucose (0.7%)‐supplemented medium were transferred to the optimized condition at the second stage, the lipid yield was boosted to 1974 mg L^?1, a value almost 20‐fold higher than for the control. The transesterified C. vulgaris oil showed the presence of ～82% saturated fatty acids, with palmitate and stearate as major components, thus highlighting the oxidative stability of C. vulgaris biodiesel. The fuel properties (density, viscosity, acid value, iodine value, calorific value, cetane index, ash and water contents) are comparable with the international (ASTM and EN) and Indian (IS) biodiesel standards. CONCLUSION: C. vulgaris biomass with 55% lipid content and adequate fuel properties is potentially a renewable feedstock for biodiesel. Copyright © 2011 Society of Chemical Industry     

Variation in the volatile terpenoids of two industrially important basil (Ocimum basilicum L.) cultivars during plant ontogeny in two different cropping seasons from India

BACKGROUND: Two Ocimum basilicum cultivars, ‘Vikarsudha’ and ‘CIM‐Saumya’, grown in the Kumaon region of western Himalaya were evaluated for their essential oil yield and composition at different stages of plant growth during two distinct cropping seasons (spring–summer and rain–autumn). RESULTS: The highest yield of essential oil was obtained at full bloom stage in both cultivars in both cropping seasons. The essential oils obtained from different stages in two cropping seasons were analysed by capillary gas chromatography with flame ionisation detection, and gas chromatography–mass spectrometry. The major component of cultivar ‘Vikarsudha’ was methyl chavicol (84.3–94.3%), while for cultivar ‘CIM‐Saumya’ the main components were methyl chavicol (62.5–77.6%) and linalool (14.4–34.1%). CONCLUSION: This study clearly indicated that cultivar, cropping season, plant ontogeny and plant part had significant effects on the yield and quality of the essential oil of O. basilicum. Further, the amount of methyl chavicol in the cultivars grown in this region was higher than in cultivars from other parts of India. Copyright © 2011 Society of Chemical Industry     

Vinyl carbazole (VC) functionalized mesoporous silica polymer nanocomposites (SBA/VC) for the antibacterial activity studies

Vinyl carbazole (VC) functionalized ordered mesoporous silica polymer nanocomposites (SBA/VC) were synthesized by in situ radical polymerization of monomers inside the mesoporous framework and characterized for the antibacterial activity studies against gram positive and gram negative bacteria. Powder X-ray diffraction and N₂ adsorption isotherms of SBA/VC nanocomposites showed the presence of mesoporous nature. The antimicrobial activity results showed increasing trend with the increase in the concentration of vinyl carbazole (VC) and the maximum antibacterial activity was achieved with SBA/VC₆₄ nanocomposites.     

Motion analytics of zebrafish using fine motor kinematics and multi-view trajectory

Zebrafish is a useful animal model for studying human diseases such as muscle disorders. However, manual monitoring of fish motion is time-consuming and prone to subjective variations. In this paper, an automatic fish motion analytics framework is proposed. The proposed framework could be exploited to help validate zebrafish models of transgenic zebrafish that express human genes carrying mutations which lead to muscle disorders, thus affecting their ability to swim normally. To differentiate between wild-type (normal) and transgenic zebrafish, the proposed framework consists of two approaches to exploit discriminative spatial–temporal kinematic features which are extracted to represent zebrafish movements. First, the proposed approach studies precise quantitative measurements of motor movement abnormalities using a camera with the capability to record videos with high frames rates (up to 1,000 frames per second). This differs from previous works, which only tracked each fish as a single point over time. Second, the proposed approach studies multi-view spatial–temporal swimming trajectories. This differs from previous works which typically only considered single-view analysis of fish swimming trajectories. The proposed motion features are then incorporated into a supervised classification approach to identify abnormal fish movements. Experimental results have shown that the proposed approach is capable of differentiating between wild-type and transgenic zebrafish, thus helping to validate the zebrafish models.     

Investigation of in vitro bone cell adhesion and proliferation on Ti using direct current stimulation

Our objective was to establish an in vitro cell culture protocol to improve bone cell attachment and proliferation on Ti substrate using direct current stimulation. For this purpose, a custom made electrical stimulator was developed and a varying range of direct currents, from 5 to 25 μA, was used to study the current stimulation effect on bone cells cultured on conducting Ti samples in vitro. Cell–material interaction was studied for a maximum of 5 days by culturing with human fetal osteoblast cells (hFOB). The direct current was applied in every 8 h time interval and the duration of electrical stimulation was kept constant at 15 min for all cases. In vitro results showed that direct current stimulation significantly favored bone cell attachment and proliferation in comparison to nonstimulated Ti surface. Immunochemistry and confocal microscopy results confirmed that the cell adhesion was most pronounced on 25 μA direct current stimulated Ti surfaces as hFOB cells expressed higher vinculin protein with increasing amount of direct current. Furthermore, MTT assay results established that cells grew 30% higher in number under 25 μA electrical stimulation as compared to nonstimulated Ti surface after 5 days of culture period. In this work we have successfully established a simple and cost effective in vitro protocol offering easy and rapid analysis of bone cell–material interaction which can be used in promotion of bone cell attachment and growth on Ti substrate using direct current electrical stimulation in an in vitro model.     

Sustainable hydrogen production by catalytic hydrolysis of alkaline sodium borohydride solution using recyclable Co-Co2B and Ni-Ni3B nanocomposites

In this article, we report Co-Co₂B and Ni-Ni₃B nanocomposites as catalyst for hydrogen generation from alkaline sodium borohydride. Kinetic studies of the hydrolysis of sodium borohydride with Co-Co₂B and Ni-Ni₃B nanocomposites reveal that the concentration of NaBH₄ has no effect on the rate of hydrogen generation. Hydrolysis was found to be first order with respect to the concentration of catalyst. The catalytic activity of Co-Co₂B was found to be much higher than that of Ni-Ni₃B as inferred from the activation energies 35.245 KJ/mol and 55.810 kJ/mol, respectively. Co-Co₂B nanocomposites were found to be more magnetic than Ni-Ni₃B. These catalysts showed superior recyclability with almost the similar catalytic activities for several hydrolytic cycles supporting the principles of sustainability. Co-Co₂B catalyst showed hydrogen generation rate of about 4300 mL/min/g which is comparable to most of the reported good catalysts till date.     

Hardystonite improves biocompatibility and strength of electrospun polycaprolactone nanofibers over hydroxyapatite: A comparative study

The aim of this study was to compare physico-chemical and biological properties of hydroxyapatite (HA) and hardystonite (HS) based composite scaffolds. Hardystonite (Ca₂ZnSi₂O₇) powders were synthesized by a sol–gel method while polycaprolactone–hardystonite (PCL–HS) and polycaprolactone–hydroxyapatite (PCL–HA) were fabricated in nanofibrous form by electrospinning. The physico-chemical and biological properties such as tensile strength, cell proliferation, cell infiltration and alkaline phosphatase activity were determined on both kinds of scaffolds. We found that PCL–HS scaffolds had better mechanical strength compared to PCL–HA scaffolds. Addition of HA and HS particles to PCL did not show any inhibitory effect on blood biocompatibility of scaffolds when assessed by hemolysis assay. The in vitro cellular behavior was evaluated by growing murine adipose-tissue-derived stem cells (mE-ASCs) over the scaffolds. Enhanced cell proliferation and improved cellular infiltrations on PCL–HS scaffolds were observed when compared to HA containing scaffolds. PCL–HS scaffolds exhibited a significant increase in alkaline phosphatase (ALP) activity and better mineralization of the matrix in comparison to PCL–HA scaffolds. These results clearly demonstrate the stimulatory role of Zn and Si present in HS based composite scaffolds, suggesting their potential application for bone tissue engineering.