Tuning the interlaminar shear strength and thermo-mechanical properties of glass fiber composites by incorporation of (3-mercaptopropyl) trimethoxysilane-functionalized carbon black

The incorporation of functionalized nanoscale fillers into traditional glass fiber/unsaturated polyester (GF/UPE) composites provides a more robust mechanical attributes. The current study demonstrates the potential of 3-mercaptopropyl trimethoxysilane (MPTS)-functionalized carbon black (f-CB) for enhancing the thermo-mechanical properties of GF composites. The composites infused with 1, 3 and 5 wt% of pristine and MPTS-functionalized CB were fabricated by hand lay-up and hot press processing. Tensile testing, interlaminar shear strength (ILSS) testing and dynamic mechanical analysis were used to evaluate the performance of nanocomposites. Fourier transform infrared spectroscopy validated the MPTS functionalization of CB. Pristine CB-loaded nanocomposites exhibited marginal improvement in ultimate tensile strength (UTS), ILSS and thermo-mechanical properties. However, with the addition of f-CB, the improvement in all the studied properties was more substantial. The inclusion of 5 wt% f-CB increased the elastic modulus and UTS by 16 and 22%, respectively, whereas the ILSS was enhanced by 36%, in comparison to the neat GF composite. The scanning electron microscope analysis of fractured ILSS samples revealed better fiber-matrix adhesion and compatibility in f-CB-loaded nanocomposites. At the same filler weight percentage, the storage modulus at 25 °C was ~ 19% higher than that of neat composite. The f-CB inclusion resulted in increment of T _g by ~ 13 °C over the T _g of neat GF/UPE composite (~ 109 °C). These improvements were due to the chemical connection of f-CB to the UPE matrix and GF surface. With such improvements in thermal and mechanical properties, these nanocomposites can replace the conventional GF composites with prominent improvements in performance.     

Preparation and characterization of starch-based composite films reinforced by apricot and walnut shells

Starch-based biodegradable films were prepared by using solution-casting method and reinforced by agricultural residues [apricot and walnut shell (APS and WNS) powder]. The powder of both shells was added in different ratios (0, 2.5, 5, 7.5, and 10%) to investigate the microstructures and performances (mechanical and thermal properties) of the starch-based film. Different techniques such as impact, tensile testing, scanning electron microscope, optical microscope (OM), X-ray diffraction (XRD), water vapor transmission rate (WVTR), and dynamic mechanical analysis were applied to study the thermomechanical and barrier properties of the composite films. Results showed that the incorporation of both shells significantly improved the WVTR and mechanical properties of starch-based films. The shells powder was significantly increased the Young's modulus and tensile strength of the starch-based films. Both OM and SEM results showed reasonably good compatibility between starch and reinforced shells. OM and XRD indicated that the APS and WNS not only retained their crystalline structure in the film but they also strengthened the peak intensity of the film. This phenomenon can be used to explain the mechanism of mechanical reinforcement. Since all the components used in the preparation of the films are food grade ingredients, it is expected that the films developed in this work will be used for food packaging applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47978.     

Microstructure and hardness studies of the electron beam welded zone of Hastelloy C-276

Electron beam welding (EBW) technique is becoming popular in nuclear, chemical and aerospace industries due to its high penetration depth and fast cooling rate. Samples of Hastelloy C-276 have been welded by electron beam (EB). A scanning electron microscope (SEM) having the attachment of an energy dispersive system (EDS) has been employed to study the resulting microstructure and micro-eutectic phases. The microstructure of the molten zone (MZ) is found to be of fine lamellar type. The hardness of the MZ is found to be 35% higher compared to as-received alloy. The micro-eutectoids are rich in Mo and W. The X-ray diffraction patterns of the MZ show shifting of peaks towards higher angle compared to the diffraction pattern of the as-received alloy. Broadening of the peaks is also observed in the diffraction pattern of the MZ. Formation of the μ-phase was observed in the MZ after a tempering treatment at 950 °C.     

Corrosion protection of commercial steel using stainless steel coatings deposited by Cathodic Arc Plasma Deposition technique

The commercial steel AISI 1010 was coated with AISI 316L steel using Cathodic Arc Plasma Deposition (CAPD) technique. The coatings were deposited in vacuum and in the presence of nitrogen, acetylene and mixture of the two as reactive gases. The coatings were deposited as a function of time while other parameters remained constant. The coatings 0.75 to 1.3 μm thick were adherent and amorphous. The aqueous corrosion properties of the coated samples in 3.5 wt % NaCl solution were studied by Tafel, cyclic and potentiodynamic polarization measurements. The derived corrosion parameters were then compared among the various uncoated and coated samples. The study revealed that the coated samples were more corrosion resistant than the uncoated one. Similarly, the samples coated in the nitrogen + acetylene mixture atmosphere were more corrosion resistant than the samples coated in only nitrogen and acetylene atmospheres. The corrosion parameters were also compared as a function of coating time to ascertain best coating thickness.     

Plasma-enhanced chemical vapor deposition of polyperinaphthalene thin films

Plasma-enhanced chemical vapor deposition (PECVD) has been used to grow corrosion-resistive, semiconducting thin films of the graphite-like polymer polyperinaphthalene (PPN) from 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA). Unlike thermal chemical vapor deposition of PPN from PTCDA, where thin film growth is catalyzed by a transition metal substrate, PPN films have been grown by PECVD for the first time on non-catalytic substrates: indium tin oxide (ITO)-coated glass, aluminum and silicon. Films with the same morphology and molecular characteristics have also been grown on steel substrates, where iron functions as a growth catalyst. Potentiodynamic corrosion measurements in pH 5 water show that PPN films on steel provide an effective corrosion protection layer.     

Paired helical filaments (PHFs) are a family of single filament structures with a common helical turn period: negatively stained PHF imaged by TEM and measured before and after sonication, deglycosylation, and dephosphorylation

Isolated paired helical filaments (PHFs) were visualized on glutaraldehyde vapor-treated thin approximately 10-nm thick indirect carbon films using high-resolution transmission electron microscopy (TEM) and the negative stain, phosphotungstate acid (PTA) at near neutral pH of 6.8. PHF preparations were prepared with and without 1 minute of sonication. These same PHF were also deglycosylated with endoglycosidase F/N-glycosidase F for 1 hour or the PHF were dephosphorylated with PP-2A for 1 hour. The negatively stained PHF filaments were quantitatively studied by measuring their wide regions (W) their thin regions (T) and their helical turn period (L) and these separate parameters were averaged for each filament. In the unsonicated PHF preparation there were PHF, cylindrical filaments with periodic thin regions (CF-PT), cylindrical filaments (CF), as well as 2.0-nm tau polymer-like filaments. The CF-PT were characterized by W, T, and L measurements and the CF were characterized by diameter measurements. The paired helical filament model proposed by Kidd (1963, Nature 197:192-193) of two approximately 10 nm filaments twisting around each other every approximately 80 nm with a thin region of 10 nm and a wide region of 25 nm does not correspond to the PHF structures found. None of the PHF we observed were composed of a pair of filaments and all of the PHF appear to be a single filament. The wide regions ranged from 12.5-27 nm and the thin regions ranged from 4.5-12.3 nm. The helical turn periods ranged from 76-85 nm and were generally about 80 nm. Only the helical turn period of approximately 80 nm was a common property of the whole family of PHF structures. The CF-PT appear to be a PHF precursor filament. Deglycosylation of the PHF and CF-PT reduced their sizes by 0.5-0.6 nm and 0.7-1.0 nm, respectively, and the right-hand helicity of the PHF was lost after deglycosylation. Dephosphorylation with PP-2A reduced the PHF wide regions by 6.0 nm and the thin regions by 2.6 nm.     

Alzheimer paired helical filaments (PHFs) studied by high-resolution TEM: what can vertical Pt-C replication tell us about the organization of the pronase-digested PHF core?

Untreated paired helical filaments (PHFs) and pronase-digested PHF-core filaments were stereoscopically imaged with a freeze-drying vertical platinum-carbon replication preparation method for TEM. The untreated PHF have an average wide region (W) = 22.8 +/- 2.4 nm, a narrow region (T) = 10.6 +/- 1.7 nm, and a helical turn period (L) = 78.6 +/- 13.4. The surfaces of the untreated PHF's fuzzy coat appears disorganized. The widths of the pronase-treated PHF-core filaments were significantly reduced (W(d) = 14.8 +/- 1.2 nm, T(d) = 5.7 +/- 1.0 nm, and L(d) = 75.4 +/- 17 nm). The surfaces of the untreated PHF contained approximately 1.1 nm strands, the same size as tau monomer ( approximately 1.0 nm). The pronase-digested PHF cores mostly contained approximately 1.6 +/- 0.3 nm strands although strand diameters ranged from 0.6-2.5 nm. The strands sometimes appear to be wrapped around the filament axis; less often, they appear to be roughly parallel to the PHF axis, and otherwise appear to be randomly oriented. Images of pronase-digested PHF core images are discussed in relation to the core's biochemical composition, its proposed beta structure, and structural subunit models. Images of the untreated and the pronase-digested PHF support a helical ribbon morphology.     

On Structural,Optical, and Electrical Properties of Chromium Oxide Cr2O3 Thin Film for Applications

Protection of Metals and Physical Chemistry of Surfaces - Chromium oxide thin films were grown on Al2O3 substrates by ablating a pure Cr2O3 target using a KrF excimer laser. The energy density on...     

Effect of thermal degradation on the impact properties of PVC compounds

An instrumented drop weight impact test was used to study the effect of thermal degradation on the impact properties of PVC compounds. The impact resistance of the aged compounds related well with their weight loss and hence, with thermal degradation. Each compound showed a specific weight loss percentage that correlated with a 50% loss in its impact properties (failure point), irrespective of the aging temperature. The results were also used to estimate a thermal index (TI) of each compound in a rapid and reliable way.     

Automatic Quality Inspection of Bakery Products Based on Shape and Color Information

基于形状和颜色信息的烘焙产品的自动质量检测

Babar Khan,韩芳*,王直杰,Ather Iqbal

（东华大学 信息科学与技术学院,上海 201620）

创新点说明：

利用支持向量机和基于生物启发式HMAX模型的形状辨识器与RGB对抗颜色通道辨识器集成而形成一种有效的智能分类系统,并将其用于烘焙产品的质量检测。

研究目的：

本文要对烘焙产品进行更有效的质量检测,需要提出一种智能方法。

研究方法：

本文采用了支持向量机、基于生物启发式HMAX模型的形状辨识器与RGB对抗颜色通道辨识器集成,形成一种高级自动分类系统,对烘焙产品根据其形状和颜色（烘焙时间）进行对应分类。

结果：

利用本文方法对烘焙产品进行质量检测的结果与其它方法相比较,发现本文提出的基于生物启发的机器视觉系统运行更加精确和有效,同时发现采用One Versus One支持向量机和Directed Acyclic Graph支持向量机可以得到最大的分类精确率。本文方法对饼干形状和颜色的辨识分别达到了95%和100%的分类精确率。同时,算法稳定。

结论：

本文方法因其更加可靠和精确可用于代替现有的烘焙产品检测方法。

关键词：烘焙产品质量检测,计算机视觉,HMAX, 对抗颜色通道,RGB颜色辨识器,支持向量机