Using <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR techniques and artificial neural networks to detect the adulteration of olive oil with hazelnut oil

The lack of any official analytical method to detect the adulteration of olive oil with a low percentage of hazelnut oil is explained by the similarities in the chemical compositions of both kinds of oils. To counter this problem, an artificial neural network based on ¹H-NMR and ¹³C-NMR data has been developed to detect olive oil adulteration, and the results from this ANN are presented here. A training set consisting of hazelnut oils, pure olive oils, and olive oils blended with 2–20% hazelnut oils was used to design and train a multilayer perceptron with 100% correct classifications. This mathematical model was also validated using an external validation set of blend samples (3–15%) and genuine samples. The detection limit of the model was around 8%.     

Impact of microbial transglutaminase on the viscoelastic profile of formulated bread doughs

The effects of microbial transglutaminase (TGM) on the viscoelastic profile of wheat flour doughs when added singly and in combination with hydrocolloids—hydroxypropylmethylcellulose (HPMC) and a high ester pectin (GENU pectin type BIG, or BIG)—, amylolytic (-amylase) and non amylolytic enzymes (xylanase) and an emulsifier [diacetyl tartaric acid ester of mono-diglycerides (DATEM)] have been investigated by applying response surface analysis to a Draper-Lin small composite design of formulated dough samples. In spite of the major effects on mixing, textural, extensional and viscometric parameters, which were provided by hydrocolloid/surfactant combinations, incorporation of TGM into dough formulas improved some viscoelastic properties. TGM, when added to DATEM and/or HPMC-containing doughs, induced synergistic effects on mixing parameters, resulting in increased water absorption, development time and stability. Highly cohesive doughs with improved water holding capacity and gluten strength during mixing and fermentation, and suitable pasting behaviour during cooking were achieved using TGM/BIG/DATEM mixtures, mainly associated with suitable interactions of the pairs TGM/DATEM and DATEM/BIG.     

Volatile compounds on the surface and within Iberian dry-cured loin

The profile of volatile compounds from external and internal areas of Iberian dry-cured loin was studied by headspace solid-phase microextraction. Higher levels of 16 volatile compounds (hexane, decane, 3-methylbutanal, several sulphur compounds and some aromatic hydrocarbons) were detected in the outer part of the loins. These differences could be owing to several factors, such as greater exposure to oxygen and dehydration conditions in the surface of the product, which favour oxidation reactions and Strecker degradation of amino acids. Moreover, the addition of spices on the surface and the proximity of a mould layer growing on the surface of the product could also contribute to the higher levels of these compounds on the external layer. However, other sulphur compounds coming from spices showed similar levels on the surface and within the loins. This different behaviour could be a consequence of different diffusion rates depending on the features of the compound and the matrix.     

Administration of low-dose LH induces ovulation and prevents vascular hyperpermeability and vascular endothelial growth factor expression in superovulated rats

The administration, to rats, of a combination of pregnant mares serum gonadotrophin (PMSG) and human chorionic gonadotrophin (hCG) in high doses induces the ovarian hyperstimulation syndrome (OHSS) which is characterized by increased vascular permeability (VP) and simultaneous overexpression of vascular endothelial growth factor (VEGF) in ovarian cells. hCG has a longer half-life than LH and a greater biological activity, expressed in a higher incidence of complications such as OHSS. Similarly, FSH may also be related to the ovulatory changes within the follicle as there is a simultaneous surge in spontaneous cycles. The aim of this study was to compare the capacity of hCG, FSH and LH to induce ovulation and simultaneously prevent OHSS in the animal model. Immature female rats were treated with 10 IU PMSG for 4 days, and ovulation was triggered with saline, 10 IU hCG, 10 IU FSH, 10 IU LH or 60 IU LH. The number of oocytes ovulated into the tubes, VP and mRNA VEGF expression were evaluated and compared. All the hormones employed were as effective at triggering ovulation, with similar significant P values when compared with the control for which saline was used. The use of 10 IU LH resulted in significantly lower VP and VEGF expression than that seen in the groups treated with 10 IU hCG, 10 IU FSH or 60 IU LH. In conclusion, FSH and hCG, as well as a sixfold increase in LH, displayed similar biological activities, including increased VP due to excessive VEGF expression. The use of lower doses of LH produced similar rates of ovulation, while preventing the undesired changes in permeability. These experiments should therefore encourage clinicians to determine the optimal dose of LH to be employed in women in order to trigger ovulation and, at the same time, avoid the risk of OHSS.     

New Alternatives to the Estimation Problem in Hardware-Software Codesign of Complex Embedded Systems: The H.261 Video Co-dec Case Study

As Codesign problems become larger and more realistic, the required time to estimate their solutions turns into an important bottleneck. This paper presents a new approach to improve the traditional estimation techniques, in order to avoid this drawback. The presented method has been successfully tested on a large experimental benchmark, attaining quality levels close to those provided by the Synopsys Behavioral Compiler. Finally, a case study based on the standard H.261 video co-dec is described, proving the convenience of the technique on real-life situations. The obtained results show a significant improvement in the process time, while keeping the good precision and fidelity levels that the traditional estimation models usually offer.     

W-CDMA Uplink Capacity and Interference Statistics of a Long Tunnel Cigar-shaped Microcells Using the Hybrid Model of Propagation with Imperfect Power Control

The uplink capacity and the interference statistics (mean and variance) of the sectors of the cigar-shaped W-CDMA microcell are studied. A model with eighteen sectors is used to analyze the uplink. The microcells are assumed to exist in a long tunnel with at least nine base stations. The hybrid model of propagation is used in the calculations. The capacity and the interference statistics of the sectors are studied in terms of the most important parameters: sector radius, specific attenuation factor, antenna sidelobe levels, bend losses and the power control standard deviation error.     

Speeds of Sound and Isentropic Compressibilities of Binary Mixtures Containing Cyclic Ethers and Haloalkanes at 298.15 and 313.15 K

Speeds of sound of binary mixtures formed by either 1,3-dioxolane or 1,4-dioxane and isomeric chlorobutanes at 298.15 and 313.15 K are reported in this paper. Isentropic compressibilities and isentropic compressibility deviations have been calculated from experimental measurements. Isentropic compressibility deviations have been fitted to a Redlich–Kister equation, and the results have been discussed in terms of molecular interactions and structural effects. Isentropic compressibilities have been estimated at 298.15 K using the Prigogine–Flory–Patterson theory.     

Identification of cracks and cavities using the topological sensitivity boundary integral equation

The purpose of this communication is to present a novel approach to compute the so called Topological Sensitivity (TS) of any variable or functional in elasticity using Boundary Integral Equations (BIEs), and its use as a tool for identification of defects, by itself or in conjunction with zero-order methods, like Genetic Algorithms. The TS of a cost functional provides a measure of the susceptibility of a defect being at a given location. The main contributions are summarized in the following points:     

Convolutional Codes of Goppa Type

A new kind of Convolutional Codes generalizing Goppa Codes is proposed. This provides a systematic method for constructing convolutional codes with prefixed properties. In particular, examples of Maximum-Distance Separable (MDS) convolutional codes are obtained.This research was partially supported by the Spanish DGI through research project BFM2003-00078 and by the Junta de Castilla y León through research projects SA071/04 and SA032/02.     

RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrate

RILEM RecommendationsRILEM TC 177-MDT: ‘Masonry Durability and on-site Testing’

RILEM recommendation MDT. D.3—Determination “in situ” of the adhesive strength of rendering and plastering mortars to their substrate