Influence of operation variables on quality parameters of olive husk oil extracted with CO<Subscript>2</Subscript>: Three-step sequential extraction

Supercritical CO₂ extraction is a viable alternative process for the extraction of high-quality oil from olive husk (also known as olive pomace), a residue obtained in the production of olive oil. We analyzed the effect of pressure (100–300 bar), temperature (40–60°C), solvent flow (1–1.5 L/min), and particle size (0.30–0.55 mm) on four important quality parameters of the oil extracted with CO₂: tocopherol concentration, extinction coefficients at 232 and 270 nm, and saponification value. Response surface methodology was used to obtain mathematical expressions related to the operating variables and parameters studied. Results from these experiments were also used to design a three-step sequential CO₂ extraction procedure to obtain a higher-quality extract. The optimal operational sequence consisted of a first extraction step at 75 bar for 1 h using 1% (vol/vol) ethanol modifier, followed by a second extraction stage at 350 bar for 2.5 h without ethanol and a third step, also at 350 bar, for 2.5 h but using ethanol. These extraction conditions obtained an intermediate fraction of oil with 64% yield and all normal parameters according to European Commission food legislation. This fraction is suitable without any further refining. On the contrary, the oils obtained by hexane extraction and by conventional supercritical CO₂ extraction at optimal conditions are suitable for human consumption after further refining. This last finding may result in improved economics of the sequential CO₂ extraction process compared to the conventional extraction method with hexane.     

Enterotoxigenic <Emphasis Type="Italic">Escherichia coli</Emphasis> strains bind bovine milk gangliosides in a ceramide-dependent process

Diarrhea caused by enterotoxigenic Escherichia coli (ETEC) is the main infectious disease of newborn calves. The first step of infection involves bacterial attachment to the intestinal mucosa. This adhesion is mediated by fimbriae that recognize some glycoconjugates on the host cell surface, in particular, several gangliosides. Because milk also contains gangliosides, these have been suggested to serve as ligands for bacterial fimbriae and thus prevent the bacterial attachment to mucosa. The most relevant ETEC strains in calves, including those with K99 and F41 fimbriae, were assayed to determine whether they are able to bind gangliosides isolated from several stages of bovine lactation. Both GM3 and GD3, the main gangliosides of milk, were recognized by ETEC strains, although the different fimbriae showed diverse levels of affinity. Unexpectedly, the adhesion to colostral gangliosides was considerably weaker than that to gangliosides from the other stages of lactation. Because the carbohydrate moiety did not change and because differences in the percentages of unsaturated FA and sphingosine between colostrum and other stages were observed, we conclude that the differences in adhesion could be due to a different composition of the ganglioside caramide.     

Phase‐dependent binary interaction parameters in industrial low‐density polyethylene separators

In the production process of low‐density polyethylene (LDPE), an important step is the flash separation of monomers and other small molecules from the polymer produced. The process is carried out adiabatically in two stages. To improve the performance of thermodynamic models, it is very important to analyze the use of model binary interaction parameters (BIP) dependent on the phase characteristics for each phase (phase‐dependent BIP). In this work the PC‐SAFT (perturbed‐chain statistical associating fluid theory) equation of state (EOS) is applied to the flash simulation of LDPE industrial separators using eight different resins. The main numerical aspects are examined with emphasis on the optimization strategy for the EOS BIP that explicitly characterizes each phase involved separately. The results demonstrate good predictive behavior. As a result of improved and more consistent modeling, a new strategy for optimized operation can be envisaged for the sequence of separators. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2106–2117, 2013     

Ceramic sheet hybrid kenaf reinforced polypropylene biocomposites

Hybrid biocomposites are one of the emerging fields in polymer composites. The purpose of this study is the development and characterization of ceramic sheet (CS) hybrid polypropylene (PP) biocomposites for broadening of the field of potential applications of biocomposites. Hybrid PP biocomposites were manufactured with 20 wt % loadings of kenaf and the addition of a CS (single or double sided) by melting and compression molding. The effects of the CS on the mechanical and thermal properties of the hybrid PP biocomposites were analyzed in terms of tensile, flexural, and impact properties, and inflammability, smoke optical density, and toxicity of the combustion gas. Also, the surface morphology of fractured hybrid PP biocomposites was observed by SEM and AFM. In spite of the brittle properties of the ceramic, the mechanical properties of the hybrid PP biocomposites were improved and, also, the inflammability of the hybrid PP biocomposites with the CS was highly improved. As a result, full impregnation of CSs into the kenaf reinforced biocomposite can contribute to the improvement of both the mechanical properties and the inflammability of biocomposites, resulting in a broadening of the field of potential applications of biocomposites such as aerospace. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1917–1922, 2013     

Piezoresponse force microscopy characterization of rare-earth doped BiFeO3 thin films grown by the soft chemical method

The multiferroic behavior with ion modification using rare-earth cations on crystal structures, along with the insulating properties of BiFeO₃ (BFO) thin films was investigated using piezoresponse force microscopy. Rare-earth-substituted BFO films with chemical compositions of (Bi_1.00−xRE_xFe_1.00O₃ (x=0; 0.15), RE=La and Nd were fabricated on Pt (111)/Ti/SiO₂/Si substrates using a chemical solution deposition technique. A crystalline phase of tetragonal BFO was obtained by heat treatment in ambient atmosphere at 500 °C for 2 h. Ion modification using La³⁺ and Nd³⁺ cations lowered the leakage current density of the BFO films at room temperature from approximately 10⁻⁶ down to 10⁻⁸ A/cm². The observed improved magnetism of the Nd³⁺ substituted BFO thin films can be related to the plate-like morphology in a nanometer scale. We observed that various types of domain behavior such as 71° and 180° domain switching, and pinned domain formation occurred. The maximum magnetoelectric coefficient in the longitudinal direction was close to 12 V/cm Oe.     

From coffee industry waste materials to skin‐friendly products with improved skin fat levels

Spent coffee grounds (SCG), which are the residue obtained from the treatment of coffee with hot water or steam, can be used for industrial applications, due to the high content in lipids. The cosmetic products might be a suitable application for these types of residues because the barrier properties of the stratum corneum (SC) are largely dependent on the intactness of the lipid lamellae that surrounds the corneocytes. The purpose of this work was to assess the feasibility of using the lipid fraction of SCG extracted with supercritical carbon dioxide in the development of new cosmetic formulations with improved skin lipids (sebum) and hydration. The use of spent coffee lipid extract in cosmetic industry seems to be a suitable approach to recycle the wastes from coffee industry. Emulsion containing 10% of the lipid fraction of SCG (SpentCofOil cream) presented promising characteristics in the improvement of sebum skin levels with a good acceptance by consumers when compared to an emulsion containing 10% w/w of green coffee oil (GreenCofOil cream) and a placebo without coffee oil (NoCofOil cream). Practical applications: In this work, the authors develop and characterize a cream containing 10% of the lipid fraction of SCG extracted with supercritical carbon dioxide with improved skin lipids (sebum) and hydration.     

Mode II Fracture Toughness of a Brittle and a Ductile Adhesive as a Function of the Adhesive Thickness

The main goal of this study was to evaluate the effect of the thickness and type of adhesive on the Mode II toughness of an adhesive joint. Two different adhesives were used, Araldite ® AV138/HV998 which is brittle and Araldite 2015 which is ductile. The end notched flexure (ENF) test was used to determine the Mode II fracture toughness because it is commonly known to be the easiest and widely used to characterize Mode II fracture. The ENF test consists of a three-point bending test on a notched specimen which induces a shear crack propagation through the bondline. The main conclusion is that the energy release rate for AV138 does not vary with the adhesive thickness whereas for Araldite 2015, the fracture toughness in Mode II increases with the adhesive thickness. This can be explained by the adhesive plasticity at the end of the crack tip.     

High-Area Ti/Pt Electrodes for the Electrochemically Catalyzed Transesterification of Soybean Oil with Methanol

Biodiesel fuel is a renewable energy source normally produced in industry by using an alkaline homogeneous catalyst to promote the transesterification of oil and methanol to fatty acid methyl ester (FAME). Undesirable side reactions occur when poorly refined oils are used, leading to serious problems of product separation and low FAME yield. Therefore, about 85% of the cost of biodiesel is determined by the cost of the feedstock. Here, we describe the development of high-area Pt films deposited on Ti substrates for the electrolytic synthesis of biodiesel from soybean oil containing water, without the addition of catalyst. The higher both the calcination temperature and the number of layers deposited on the Ti surface, the higher the electrochemically active area of Pt exposed to surface. Conversion into esters in electrolysis is proportional to the increase in the superficial area of the Ti/Pt electrodes. Thus, it is possible to synthesize biodiesel using electrodes containing very low amounts of Pt (<0.441 mg cm^?2), an important parameter in the industrial production of biodiesel.     

XFEM modelling of single-lap Kenaf fibre composite hybrid joints under quasi-static loading

ABSTRACT

The present paper aims to predict the bearing stress at failures of woven fabric kenaf fibre reinforced polymer with single-lap hybrid joints under quasi-static testing. Testing series investigated includes a variation of joint types, normalised W/d, lay-up types, plate thickness and bolt loads. Initially, cohesive failures appeared within adhesive layer, followed by net-tension failure mode in all testing series investigated associated with stress concentration. Strength prediction was carried out subsequently by implementing XFEM framework with an embedded traction-separation relationship within ABAQUS CAE. The experimental datasets and XFEM results were evaluated where good agreements were found in the combination of cross ply and thicker coupon with a discrepancy of less than 5%.     

Comparative electrochemical studies of zinc chromate and zinc phosphate as corrosion inhibitors for zinc

The anticorrosive performance of two inhibitive pigments, zinc chromate and zinc phosphate, was compared using electrochemical impedance spectroscopy (EIS) and the scanning vibrating electrode technique (SVET) in pigment extracts in 0.1 M NaCl. It was observed that zinc was protected from corrosion in both extracts. In tests using hot dip galvanised steel painted with an epoxy primer incorporating the pigments, the SVET detected the anodic and cathodic distribution along the scribes, although no significant differences were observed among the various primers. On the contrary, EIS was able to distinguish processes occurring on the metal surface exposed by the scribe in different samples. For primers with anticorrosive pigment, a time constant at high frequencies was attributed to a layer of protective nature, probably formed by metal ions from the substrate and inhibitive ions leached from the anticorrosive pigments.