Can twice weekly hemodialysis expand patient access under resource constraints?

The convention of prescribing hemodialysis on a thrice weekly schedule began empirically when it seemed that this frequency was convenient and likely to treat symptoms for a majority of patients. Later, when urea was identified as the main target and marker of clearance, studies supported the prevailing notion that thrice weekly dialysis provided appropriate clearance of urea. Today, national guidelines on hemodialysis from most countries recommend patients receive at least thrice weekly therapy. However, resource constraints in low‐ and middle‐income countries (LMIC) have resulted in a substantial proportion of patients using less frequent hemodialysis in these settings. Observational studies of patients on twice weekly dialysis show that twice weekly therapy has noninferior survival rates compared with thrice weekly therapy. In fact, models of urea clearance also show that twice weekly therapy can meet urea clearance “targets” if patients have significant residual function or if they follow a protein‐restricted diet, as may be common in LMIC. Greater reliance on twice weekly therapy, at least at the start of hemodialysis, therefore has potential to reduce health care costs and increase access to renal replacement therapy in low‐resource settings; however, randomized control trials are needed to better understand long‐term outcomes of twice versus thrice weekly therapy.     

Cutting force and hole quality analysis in micro-drilling of CFRP

Micro-drilling in carbon fiber reinforced plastic (CFRP) composite material is challenging because this material machining is difficult due to anisotropic, abrasive and non-homogeneous properties and also downscaling of cutting process parameters affect the cutting forces and micro-drilled hole quality extensively. In this work, experimental results based statistical analysis is applied to investigate feed and cutting speed effect on cutting force components and hole quality. Analysis of variance based regression equation is used to predict cutting forces and hole quality and their trend are described by response surface methodology. Results show that roundness error and delamination factor have similar trends to those of radial forces and thrust force, respectively. Non-linear trends of cutting forces and hole quality errors are observed during downscaling of the micro-drill feed value. Optimization results show that cutting forces and hole quality errors are minimum at a feed value which is almost equal to the tool edge radius rather than at the lowest feed value. Therefore, the presented results clearly show the influences of size effects on cutting forces and hole quality parameters in micro-drilling of CFRP composite material.     

A Two-Step Filtering approach for detecting maize and soybean phenology with time-series MODIS data

The crop developmental stage represents essential information for irrigation scheduling/fertilizer management, understanding seasonal ecosystem carbon dioxide (CO₂) exchange, and evaluating crop productivity. In this study, we devised an approach called the Two-Step Filtering (TSF) for detecting the phenological stages of maize and soybean from time-series Wide Dynamic Range Vegetation Index (WDRVI) data derived from Moderate Resolution Imaging Spectroradiometer (MODIS) 250-m observations. The TSF method consists of a Two-Step Filtering scheme that includes: (i) smoothing the temporal WDRVI data with a wavelet-based filter and (ii) deriving the optimum scaling parameters from shape-model fitting procedure. The date of key crop development stages are then estimated by using the optimum scaling parameters and an initial value of the specific phenological date on the shape model, which are preliminary defined in reference to ground-based crop growth stage observations. The shape model is a crop-specific WDRVI curve with typical seasonal features, which were defined by averaging smoothed, multi-year WDRVI profiles from MODIS 250-m data collected over irrigated maize and soybean study sites.In this study, the TSF method was applied to MODIS-derived WDRVI data over a 6-year period (2003 to 2008) for two irrigated sites and one rainfed site planted to either maize or soybean as part of the Carbon Sequestration Program (CSP) at the University of Nebraska-Lincoln. A comparison of satellite-based retrievals with ground-based crop growth stage observations collected by the CSP over the six growing seasons for these three sites showed that the TSF method can accurately estimate the date of four key phenological stages of maize (V2.5: early vegetative stage, R1: silking stage, R5: dent stage and R6: maturity) and soybean (V1: early vegetative stage, R5: beginning seed, R6: full seed and R7: beginning maturity). The root mean square error (RMSE) of phenological-stage estimation for maize ranged from 2.9 [R1] to 7.0 [R5] days and from 3.2 [R6] to 6.9 [R7] days for soybean, respectively. In addition, the TSF method was also applied for two years (2001 and 2002) over eastern Nebraska to test its ability to characterize the spatio-temporal patterns of these key phenological stages over a larger geographic area. The MODIS-derived crop phenological stage dates agreed well with the statistical crop progress data reported by the United State Department of Agriculture (USDA) National Agricultural Statistics Service (NASS) for eastern Nebraska's three crop agricultural statistic districts (ASDs). At the ASD-level, the RMSE of phenological-stage estimation ranged from 1.6 [R1] to 5.6 [R5] days for maize and from 2.5 [R7] to 5.3 [R5] days for soybean.     

Global estimates of evapotranspiration and gross primary production based on MODIS and global meteorology data

The simulation of gross primary production (GPP) at various spatial and temporal scales remains a major challenge for quantifying the global carbon cycle. We developed a light use efficiency model, called EC-LUE, driven by only four variables: normalized difference vegetation index (NDVI), photosynthetically active radiation (PAR), air temperature, and the Bowen ratio of sensible to latent heat flux. The EC-LUE model may have the most potential to adequately address the spatial and temporal dynamics of GPP because its parameters (i.e., the potential light use efficiency and optimal plant growth temperature) are invariant across the various land cover types. However, the application of the previous EC-LUE model was hampered by poor prediction of Bowen ratio at the large spatial scale. In this study, we substituted the Bowen ratio with the ratio of evapotranspiration (ET) to net radiation, and revised the RS-PM (Remote Sensing-Penman Monteith) model for quantifying ET. Fifty-four eddy covariance towers, including various ecosystem types, were selected to calibrate and validate the revised RS-PM and EC-LUE models. The revised RS-PM model explained 82% and 68% of the observed variations of ET for all the calibration and validation sites, respectively. Using estimated ET as input, the EC-LUE model performed well in calibration and validation sites, explaining 75% and 61% of the observed GPP variation for calibration and validation sites respectively.Global patterns of ET and GPP at a spatial resolution of 0.5° latitude by 0.6° longitude during the years 2000-2003 were determined using the global MERRA dataset (Modern Era Retrospective-Analysis for Research and Applications) and MODIS (Moderate Resolution Imaging Spectroradiometer). The global estimates of ET and GPP agreed well with the other global models from the literature, with the highest ET and GPP over tropical forests and the lowest values in dry and high latitude areas. However, comparisons with observed GPP at eddy flux towers showed significant underestimation of ET and GPP due to lower net radiation of MERRA dataset. Applying a procedure to correct the systematic errors of global meteorological data would improve global estimates of GPP and ET. The revised RS-PM and EC-LUE models will provide the alternative approaches making it possible to map ET and GPP over large areas because (1) the model parameters are invariant across various land cover types and (2) all driving forces of the models may be derived from remote sensing data or existing climate observation networks.     

Partitioning large networks without breaking communities

The identification of cohesive communities is a key process in social network analysis. However, the algorithms that are effective for finding communities do not scale well to very large problems, as their time complexity is worse than linear in the number of edges in the graph. This is an important issue for those interested in applying social network analysis techniques to very large networks, such as networks of mobile phone subscribers. In this respect, the contributions of this paper are twofold. First, we demonstrate these scaling issues using a prominent community-finding algorithm as a case study. Then, we show that a two-stage process, whereby the network is first decomposed into manageable subnetworks using a multilevel graph partitioning procedure, is effective in finding communities in networks with more than 10⁶ nodes.     

Stacking graphic elements to avoid over-plotting

An ongoing challenge for information visualization is how to deal with over-plotting forced by ties or the relatively limited visual field of display devices. A popular solution is to represent local data density with area (bubble plots, treemaps), color (heatmaps), or aggregation (histograms, kernel densities, pixel displays). All of these methods have at least one of three deficiencies:1) magnitude judgments are biased because area and color have convex downward perceptual functions, 2) area, hue, and brightness have relatively restricted ranges of perceptual intensity compared to length representations, and/or 3) it is difficult to brush or link to individual cases when viewing aggregations. In this paper, we introduce a new technique for visualizing and interacting with datasets that preserves density information by stacking overlapping cases. The overlapping data can be points or lines or other geometric elements, depending on the type of plot. We show real-dataset applications of this stacking paradigm and compare them to other techniques that deal with over-plotting in high-dimensional displays.     

A Unified Variational Volume Registration Method Based on Automatically Learned Brain Structures

We introduce a new volumetric registration technique that effectively combines active surfaces with the finite element method. The method simultaneously aligns multi-label automatic structural segmentation results, which can be obtained by the application of existing segmentation software, to produce an anatomically accurate 3D registration. This registration is obtained by the minimization of a single energy functional. Just like registering raw images, obtaining a 3D registration this way still requires solving a fundamentally ill-posed problem. We explain through academic examples as well as an MRI dataset with manual anatomical labels, which are hidden from the registration method, how the quality of a registration method can be measured and the advantages our approach offers.     

Structural,optical and electrical properties of Cu<Subscript>2</Subscript>Zn<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>SnS<Subscript>4</Subscript> quinternary alloys nanostructures deposited on porous silicon

The Cu₂Zn_1?xCd_xSnS₄ quinternary alloy nanostructures with different Cd contents were grown using spin coating technique on porous silicon (63.93 %) substrate. The structural properties of Cu₂Zn_1?xCd_xSnS₄/PS were investigated by X-ray diffraction and field emission-scanning electron microscope (FE-SEM). The optical properties studied through photoluminescence technique, indicated that the band gap is shifted as Cd content increases from 1.84 eV at x = 0 to 1.76 eV at x = 1. The electrical characterization of the Ag/n-PS/Cu₂Zn_1?xCd_xSnS₄/Ag diode through current to voltage (I–V) characterization shows the highest photo-response of (value if any) at Cu₂Zn_0.4Cd_0.6SnS₄ composition.     

Tri‐band composite cylindrical dielectric resonator antenna with hybrid mode excitation and cross‐polarization suppression

This communication investigates composite cylindrical dielectric resonator antenna (CDRA) for various wireless applications. Three important features of proposed antenna design are (i) realization of two different hybrid modes, that is, HEM_11δ and HEM_12δ mode in CDRA with the help of modified annular ring printed line (work as both magnetic dipole and electric dipole), both the hybrid modes support broadside radiation characteristics (ii) suppression of HEM_21δ mode, in order to reduce the cross‐polarization level in H‐plane of other hybrid modes (HEM_11δ and HEM_12δ mode) by an amount of 8‐10 dB (iii) creation of triple‐band attribute using the concept of composite antenna. The proposed antenna design has been fabricated and practically tested. Simulated outcomes show good agreement with measured outcomes. It works in three frequency bands, that is, 2.25‐2.79 GHz, 3.1‐4.0 GHz, and 5.05‐5.6 GHz. The designed antenna structure is appropriate for WLAN and WiMAX applications.