Spatial heterogeneity enhances and modulates excitability in a mathematical model of the myometrium

The muscular layer of the uterus (myometrium) undergoes profound changes in global excitability prior to parturition. Here, a mathematical model of the myocyte network is developed to investigate the hypothesis that spatial heterogeneity is essential to the transition from local to global excitation which the myometrium undergoes just prior to birth. Each myometrial smooth muscle cell is represented by an element with FitzHugh–Nagumo dynamics. The cells are coupled through resistors that represent gap junctions. Spatial heterogeneity is introduced by means of stochastic variation in coupling strengths, with parameters derived from physiological data. Numerical simulations indicate that even modest increases in the heterogeneity of the system can amplify the ability of locally applied stimuli to elicit global excitation. Moreover, in networks driven by a pacemaker cell, global oscillations of excitation are impeded in fully connected and strongly coupled networks. The ability of a locally stimulated cell or pacemaker cell to excite the network is shown to be strongly dependent on the local spatial correlation structure of the couplings. In summary, spatial heterogeneity is a key factor in enhancing and modulating global excitability.     

Sn2P2S6 films for memory devices with nondestructive readout

The polarization switching processes of ferroelectric polycrystalline Sn₂P₂S₆ films on Al substrates were studied. The effect of full reverse spontaneous switching after the influence of a repolarizing pulse on the prepoled sample was investigated. This opens the way for making the ferroelectric memory devices with rapid nondestructive readout.     

5‐Amino‐3,4‐dinitropyrazole as a Promising Energetic Material

The nitrogen‐rich energetic compound 5‐amino‐3,4‐dinitropyrazole (5‐ADP) was investigated using complementary experimental techniques. X‐ray diffraction indicates the strong intermolecular hydrogen bonding in 5‐ADP crystals. Compound exhibits low impact sensitivity (23 J) and insensitivity to friction. The activation energy of thermolysis determined to be 230±5 kJ mol⁻¹ from DSC measurements. Accelerating rate calorimetry indicates the lower thermal stability (173 °C) of 5‐ADP than that of RDX, which is probably the main concern about using this compound. 5‐ADP also exhibits good compatibility with common energetic materials (viz. TNT, RDX, ammonium perchlorate), including an active binder. The burning rate of 5‐ADP monopropellant is higher than that of benchmark HMX, while the pressure exponent 0.51±0.04 is surprisingly low. Addition of ammonium perchlorate does not affect the pressure exponent of 5‐ADP, while the burning rate increases. The 5‐amino‐3,4‐dinitropyrazole exhibits a notable combination of combustion performance, low sensitivity, and good compatibility, which renders it as a promising energetic material.     

Achromatic optical elements

The principles of wavefront reconstruction by means of a geometric-optical reflection of radiation from surfaces of interference fringe maxima are discussed. The optical elements based on these principles should be achromatic. Two methods of the optical elements design are proposed. The first method is a direct holographic recording of the interference fringe structure containing only a few periods, and the second method is a combination of the measurement of the object wavefront shape with digital holography methods.     

Method of Monte Carlo simulation verification in hadron therapy with non-tissue equivalent detectors

In hadron therapy the spectra of secondary particles can be very broad in type and energy. The most accurate calculations of tissue equivalent (TE) absorbed dose and biological effect can be achieved using Monte Carlo (MC) simulations followed by the application of an appropriate radiobiological model. The verification of MC simulations is therefore an important quality assurance (QA) issue in dose planning. We propose a method of verification for MC dose calculations based on measurements of either the integral absorbed dose or the spectra of deposited energies from single secondary particles in non-TE material detectors embedded in a target of interest (phantom). This method was tested in boron neutron capture therapy and fast neutron therapy beams.     

Sustained hydrogen photoproduction by phosphorus-deprived Chlamydomonas reinhardtii cultures

This study demonstrates that, besides sulfur deprivation, sustained H₂ photoproduction in Chlamydomonas reinhardtii cultures can be generated by incubating algae under phosphorus-deprived (−P) conditions. However, phosphorus deficiency in algal cells could not be obtained by resuspension of algae in −P medium, evidently due to a significant reserve of phosphorus in cells. In this study, phosphorus deficiency was accomplished by inoculating the washed algae into the −P medium at low initial cell densities (below 2 mg Chl l⁻¹). After the initial growth period, where cells utilize intracellular phosphorus, algae established anaerobic environment followed by the period of H₂ photoproduction. The maximum H₂ output (∼70 ml l⁻¹) was obtained in cultures with the initial Chl content ∼1 mg l⁻¹. Cultures with Chl above 2 mg l⁻¹ did not produce H₂ gas. The physiological response of algal cultures to phosphorus deprivation demonstrated significant similarities with the response of algae to sulfur depletion.     

Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior

Adaptive wear-resistant coatings produced by physical vapor deposition (PVD) are a relatively new generation of coatings which are attracting attention in the development of nanostructured materials for extreme tribological applications. An excellent example of such extreme operating conditions is high performance machining of hard-to-cut materials. The adaptive characteristics of such coatings develop fully during interaction with the severe environment. Modern adaptive coatings could be regarded as hierarchical surface-engineered nanostructural materials. They exhibit dynamic hierarchy on two major structural scales: (a) nanoscale surface layers of protective tribofilms generated during friction and (b) an underlying nano/microscaled layer. The tribofilms are responsible for some critical nanoscale effects that strongly impact the wear resistance of adaptive coatings. A new direction in nanomaterial research is discussed: compositional and microstructural optimization of the dynamically regenerating nanoscaled tribofilms on the surface of the adaptive coatings during friction. In this review we demonstrate the correlation between the microstructure, physical, chemical and micromechanical properties of hard coatings in their dynamic interaction (adaptation) with environment and the involvement of complex natural processes associated with self-organization during friction. Major physical, chemical and mechanical characteristics of the adaptive coating, which play a significant role in its operating properties, such as enhanced mass transfer, and the ability of the layer to provide dissipation and accumulation of frictional energy during operation are presented as well. Strategies for adaptive nanostructural coating design that enhance beneficial natural processes are outlined. The coatings exhibit emergent behavior during operation when their improved features work as a whole. In this way, as higher-ordered systems, they achieve multifunctionality and high wear resistance under extreme tribological conditions.     

PolyHIPE: IPNs, hybrids, nanoscale porosity, silica monoliths and ICP-based sensors

Typical polyHIPE (porous polymers from high internal phase emulsions) have a cellular structure with volume fractions from 0.2 to 0.04, cell diameters from 15 to 25 μm and intercellular pore diameters from 0.5 to 10 μm. Unique interpenetrating polymer networks synthesized within the polyHIPE exhibited enhanced mechanical properties and an extended temperature range for damping. Hybrid polyHIPE that combine an inorganic polysilsesquioxane network with an organic polystyrene network exhibited superior high temperature mechanical properties and enhanced thermal stability. A nanoscale porosity in the cell walls, produced through the addition of a porogen to the HIPE, reduced the density and significantly enhanced the specific surface area. Porous silica monoliths with silica volume fractions of as low as 0.02 were produced through the pyrolysis of hybrid polyHIPE. PolyHIPE coated with an intrinsically conducting polymer exhibited reversible and repeatable changes in conductivity on exposure to acetone vapor, demonstrating their potential as sensor materials.