Partitioning of organic biocides between wood and supercritical carbon dioxide

The degree of interaction between selected organic biocides (tebuconazole, propiconazole, and IPBC) and wood under supercritical conditions was investigated using a supercritical fluid chromatograph. The biocides were carried through a sawdust column by CO₂ at various conditions. Retention times differed markedly both between the examined biocides and between physical conditions. Tebuconazole showed a higher affinity for wood than the other biocides. For all biocides, wood affinity was highest and, thus, fluid affinity lowest, at lowest pressures.     

Effects of climate change on biomass production and substitution in north-central Sweden

In this study we estimate the effects of climate change on forest production in north-central Sweden, as well as the potential climate change mitigation feedback effects of the resulting increased carbon stock and forest product use. Our results show that an average regional temperature rise of 4 °C over the next 100 years may increase annual forest production by 33% and potential annual harvest by 32%, compared to a reference case without climate change. This increased biomass production, if used to substitute fossil fuels and energy-intensive materials, can result in a significant net carbon emission reduction. We find that carbon stock in forest biomass, forest soils, and wood products also increase, but this effect is less significant than biomass substitution. A total net reduction in carbon emissions of up to 104 Tg of carbon can occur over 100 years, depending on harvest level and reference fossil fuel.     

Social influence during the initial phase of a fire evacuation—Analysis of evacuation experiments in a cinema theatre

Unannounced evacuation experiments in a cinema theatre were analysed. The analysis focused on investigating if people are influenced by others during the initial phase of a fire evacuation. This type of influence is called social influence. Three separate behaviour types were identified and studied and the recognition and pre-movement time was measured. The results suggest that social influence is an important factor and that it becomes more important when the fire cue, e.g., the alarm, is unclear or uninformative. Results also indicate that social influence increases with decreasing distance between visitors. This result implies that individuals are influenced more by people who are close than by people who are further away.     

Low-voltage terahertz quantum-cascade lasers based on LO-phonon-assisted interminiband transitions

A report is presented on GaAs/(Al,Ga)As terahertz (THz) quantum-cascade lasers (QCLs) based on alternating photon and longitudinal optical (LO) phonon-assisted transitions between quasi-minibands. The design is optimised for low threshold current densities and low operating voltages, resulting in reduced ohmic heating during continuous-wave (CW) operation. The QCLs exhibit lasing over a broad range of frequencies from 2.91 to 3.21 THz. Using single-plasmon waveguides, pulsed operation up to 114 K and CW operation up to 65 K has been achieved.     

Plant fibre composites – porosity and stiffness

Plant fibre composites contain typically a relatively large amount of porosity which influences their performance. A model, based on a modified rule of mixtures, is presented to include the influence of porosity on the composite stiffness. The model integrates the volumetric composition of the composites with their mechanical properties. The fibre weight fraction is used as an independent parameter to calculate the complete volumetric composition. A maximum obtainable stiffness of the composites is calculated at a certain transition fibre weight fraction, which is characterised by a best possible combination of high fibre volume fraction and low porosity. The model is validated with experimental data from the literature on several types of composites. A stiffness diagram is presented to demonstrate that the calculations can be used for tailoring and design of composites with a given profile of properties.     

Development of Mechanical Anchor for CFRP Tendons Using Integrated Sleeve

A durable and very efficient external strengthening system is achieved if steel tendons for posttensioning applications can be replaced with carbon fiber-reinforced polymer (CFRP) tendons, and if reliable anchorage systems are developed. This paper presents a newly developed and simple-to-use, two-piece wedge anchorage for CFRP tendons with an integrated sleeve and a differential angle between barrel and wedge sections. Three longitudinal slits are cut into the one-piece wedge, with one slit open and the other two stopping 1 mm from the inner wedge hole. The integrated sleeve holds the wedge’s sections together during presetting and loading, resulting in a circumferential confined gripping of the CFRP tendon and optimized surface friction area. Therefore, the one-piece wedge differs from conventional wedge systems, where the wedges act separately with adjacent spaces, wedging the separate tendon sleeve in the longitudinal direction. Evaluation of the failure modes during testing was one of the main keys in achieving an increasingly better performance of the anchorage until the final anchorage was developed. The obtained failure modes are therefore described to enlighten the importance of addressing them when testing. The test setup used and measured behavior are described further together with the loading procedure. The anchorage reached the full capacity of the CFRP tendon and was seen to ensure a stable load of fracture.     

Incentivizing wood-based Fischer–Tropsch diesel through financial policy instruments: An economic assessment for Norway

The objective of this study is to evaluate a select set of financial incentive instruments that can be employed by the Norwegian government for encouraging early investment and production experience in wood-based Fischer–Tropsch diesel (FTD) technologies as a means to accelerate reductions in greenhouse gas emissions (GHG) stemming from road-based transport. We start by performing an economic analysis of FTD produced from Norwegian forest biomass at a pioneer commercial plant in Norway, followed with a cost growth analysis to estimate production costs after uncertainty in early plant performance and capital cost estimates are considered. Results after the cost growth analysis imply that the initial production cost estimates for a pioneer producer may be underestimated by up to 30%. Using the revised estimate we then assess, through scenarios, how various financial support mechanisms designed to encourage near-term investment would affect production costs over a range of uncertain future oil prices. For all policy scenarios considered, we evaluate trade-offs between the levels of public expenditure, or subsidy, and private investor profitability. When considering the net present value of the subsidy required to incentivize commercial investment during a future of low oil prices, we find that GHG mitigation via wood-FTD is likely to be considered cost-ineffective. However, should the government expect that mean oil prices in the coming two decades will hover between $97 and 127/bbl, all the incentive policies considered would likely spur investment at net present values ≤$-100/tonne-fossil-CO₂-equivalent avoided.     

Hydro reservoir handling in Norway before and after deregulation

The Norwegian Energy Act that came into force in 1991 deregulated the electricity market and removed the former obligation power companies had to supply electricity to the geographical area they were responsible for. Hence producers can supply electricity on the basis of profitability. In 2007 the Energy Act was evaluated by the Government. As a part of this, a study concerning hydro reservoir handling before and after deregulation was carried out by SINTEF. Public statistics show that average hydro reservoir levels measured in per cent of reservoir capacity have been reduced after 1990. We have used the power-market model EMPS¹ (EFI's Multi-area Power-market Simulator) to analyze if this reduction can be explained by natural variation in climatic variables or by structural changes that have occurred after 1990. Simulation results show that the reduced reservoir levels cannot be explained by natural variation in climatic variables. Structural changes such as increased transmission capacities can, however, explain some of the reduction. Our study does not indicate that the present reservoir handling gives reservoir levels that are too low. In this paper we also describe the stochastic dynamic optimization problem for long-term hydropower scheduling, and we explain how this problem actually is solved by the EMPS model.