Wild Lactobacillus strains: Technological characterisation and design of Coalho cheese lactic culture

To design a specific lactic culture for the controlled manufacture of coalho cheese, 13 Lactobacillus rhamnosus, two Lactobacillus fermentum and one Lactobacillus plantarum strains isolated from artisanal coalho cheeses were identified and characterised. Two Lb. rhamnosus, one Lb. plantarum and one Lb. fermentum were selected and grouped in pairs designing four different culture formulations that demonstrated a good performance in cheesemaking experiments at pilot scale. Further studies to adjust the balance of strains used are necessary to attain adequate sensorial and technological attributes as expected for artisanal cheeses.     

Transferable Antibiotic Resistances in Marketed Edible Grasshoppers (Locusta migratoria migratorioides)

Grasshoppers are the most commonly eaten insects by humans worldwide, as they are rich in proteins and micronutrients. This study aimed to assess the occurrence of transferable antibiotic resistance genes in commercialized edible grasshoppers. To this end, the prevalence of 12 selected genes [aac(6’)‐Ie aph(2″)‐Ia, blaZ, erm(A), erm(B), erm(C), mecA, tet(M), tet(O), tet(S), tet(K), vanA, vanB] coding for resistance to antibiotics conventionally used in clinical practice was determined. The majority of samples were positive for tet(M) (70.0%), tet(K) (83.3%) and blaZ (83.3%). A low percentage of samples were positive for erm(B) (16.7%), erm(C) (26.7%), and aac(6’)‐Ie aph(2″)‐Ia (13.3%), whereas no samples were positive for erm(A), vanA, vanB, tet(O), and mecA. Cluster analysis identified 4 main clusters, allowing a separation of samples on the basis of their country of origin.     

Implementation and optimization of the HySyLab DMFC single cell test station

In this study, the construction and optimization of a low cost home-assembled DMFC single cell test station is described. The station was built using two flow control systems, for gas (air/oxygen) and liquid (methanol), a temperature controller, an electronic load, a milliohm-meter for resistance measurements and a computerized data acquisition system. The experiments were carried out on a 6.25 cm² single cell, built using two graphite plates with triple serpentine channel geometry for both anodic and cathodic flow fields. The cell was equipped with an MEA composed of Nafion 117 as electrolyte, Pt/C based catalyst as cathode and PtRu (1:1)/C as anode. In order to develop a HySyLab internal standard procedure, MEA activation was carefully studied. The activated MEA was used to determine the optimum values of cell operating parameters, such as oxidant flow, methanol flow and temperature.     

Quality Characteristics of Wholemeal Flour and Bread from Durum Wheat (Triticum turgidum L subsp. durum Desf.) after Field Treatment with Plant Water Extracts

The use of selected plant water extracts to control pests and weeds is gaining growing attention in organic and sustainable agriculture, but the effects that such extracts may exert on the quality aspects of durum wheat are still unexplored. In 2014, 5 plant water extracts (Artemisia arborescens, Euphorbia characias, Rhus coriaria, Thymus vulgaris, Lantana camara) were prepared and distributed on durum wheat cv Valbelice to evaluate their potential herbicidal effects. After crop harvesting, the major physicochemical and technological parameters of wholemeal flours obtained from each treatment were measured and compared with those from chemical weeding and untreated controls. A baking test was also performed to evaluate the breadmaking quality. In wholemeal flours obtained after the treatment with plant extracts protein and dry gluten content were higher than in control and chemical weeding. Wholemeal flours obtained after chemical weeding reached the highest Mixograph parameters, and that from durum wheat treated with R. coriaria extract demonstrated a very high α‐amylase activity. We concluded that the treatments with plant water extracts may influence many quality traits of durum wheat. This occurrence must be taken into account in overall decisions concerning the use of plant extracts in pest and weed management practice.     

Bacterial Ecology of Fermented Cucumber Rising pH Spoilage as Determined by Nonculture‐Based Methods

Fermented cucumber spoilage (FCS) characterized by rising pH and the appearance of manure‐ and cheese‐like aromas is a challenge of significant economical impact for the pickling industry. Previous culture‐based studies identified the yeasts Pichia manshurica and Issatchenkia occidentalis, 4 Gram‐positive bacteria, Lactobacillus buchneri, Lactobacillus parrafaraginis, Clostridium sp., and Propionibacterium and 1 Gram‐negative genus, Pectinatus, as relevant in various stages of FCS given their ability to metabolize lactic acid. It was the objective of this study to augment the current knowledge of FCS using culture‐independent methods to microbiologically characterize commercial spoilage samples. Ion Torrent data and 16S rRNA cloning library analyses of samples collected from commercial fermentation tanks confirmed the presence of L. rapi and L. buchneri and revealed the presence of additional species involved in the development of FCS such as Lactobacillus namurensis, Lactobacillus acetotolerans, Lactobacillus panis, Acetobacter peroxydans, Acetobacter aceti, and Acetobacter pasteurianus at pH below 3.4. The culture‐independent analyses also revealed the presence of species of Veillonella and Dialister in spoilage samples with pH above 4.0 and confirmed the presence of Pectinatus spp. during lactic acid degradation at the higher pH. Acetobacter spp. were successfully isolated from commercial samples collected from tanks subjected to air purging by plating on Mannitol Yeast Peptone agar. In contrast, Lactobacillus spp. were primarily identified in samples of FCS collected from tanks not subjected to air purging for more than 4 mo. Thus, it is speculated that oxygen availability may be a determining factor in the initiation of spoilage and the leading microbiota.     

Sensory and Physicochemical Studies of Thermally Micronized Chickpea (Cicer arietinum) and Green Lentil (Lens culinaris) Flours as Binders in Low‐Fat Beef Burgers

Pulses are known to be nutritious foods but are susceptible to oxidation due to the reaction of lipoxygenase (LOX) with linolenic and linoleic acids which can lead to off flavors caused by the formation of volatile organic compounds (VOCs). Infrared micronization at 130 and 150 °C was investigated as a heat treatment to determine its effect on LOX activity and VOCs of chickpea and green lentil flour. The pulse flours were added to low‐fat beef burgers at 6% and measured for consumer acceptability and physicochemical properties. Micronization at 130 °C significantly decreased LOX activity for both flours. The lentil flour micronized at 150 °C showed a further significant decrease in LOX activity similar to that of the chickpea flour at 150 °C. The lowering of VOCs was accomplished more successfully with micronization at 130 °C for chickpea flour while micronization at 150 °C for the green lentil flour was more effective. Micronization minimally affected the characteristic fatty acid content in each flour but significantly increased omega‐3 and n‐6 fatty acids at 150 °C in burgers with lentil and chickpea flours, respectively. Burgers with green lentil flour micronized at 130 and 150 °C, and chickpea flour micronized at 150 °C were positively associated with acceptability. Micronization did not affect the shear force and cooking losses of the burgers made with both flours. Formulation of low‐fat beef burgers containing 6% micronized gluten‐free binder made from lentil and chickpea flour is possible based on favorable results for physicochemical properties and consumer acceptability.     

Likelihood of a marine vessel accident from wind energy development in the Atlantic

Offshore wind energy development is planned for areas off the Atlantic coast. Many of the planned wind development areas fall within traditional commercial vessel routes. In order to mitigate possible hazards to ships and to wind turbines, it is important to understand the potential for increased risk to commercial shipping from the presence of wind farms. Risk is identified as the likelihood that an occurrence will happen, and the consequences of that occurrence, should it occur. This paper deals with the likelihood of commercial vessel accidents, because of the development of offshore wind energy along the US Atlantic coast. Using Automatic Identification System (AIS) data, historical shipping routes between ports in the Atlantic were identified, from Maine to the Florida Straits. The AIS data were also used as inputs to a numerical model that can simulate cargo, tanker and tug/towing vessel movement along typical routes. The model was used to recreate present day vessel movement, as well as to simulate future routing that may be required to avoid wind farms. By comparing the present and future routing of vessels, an analysis of potential maritime accidents was used to determine the increased marginal risk of vessel collisions, groundings and allisions with stationary objects, because of the presence of wind farms. The outcome of the analysis showed little increase in vessel collisions or allisions, and a decrease in groundings as more vessels were forced seaward by the wind farms. Copyright © 2015 John Wiley & Sons, Ltd.     

餐厨垃圾与污泥厌氧发酵产气动力学特性研究

对餐厨垃圾、污水厂污泥以及餐厨垃圾与污泥混合甲烷发酵的产气能力与动力学特性进行了实验分析,餐厨垃圾在中温和高温发酵的产甲烷潜能分别是400和426 mL CH4?gVS−1,经过120℃、20 min蒸煮除油后的餐厨垃圾在中温和高温发酵的产甲烷潜能分别是418和531 mL CH4?gVS−1。经Gompertz模型计算,除油后餐厨垃圾的最大产甲烷速率Rmax比除油前提高了49.8%（中温）和19.0%（高温）,但餐厨垃圾中固体有机物的产甲烷速率变化不明显。在餐厨垃圾机械破碎匀浆过程中,部分固体有机物被液化,中、高温发酵产气过程的一级动力学呈现两阶段特征,液相有机物在中温发酵的产甲烷速率（速率常数k = 0.1955 d−1）略快于高温（k = 0.1543 d−1）;而固体有机物在高温条件下的产甲烷速率（k = 0.0804 d−1）快于中温（k = 0.0388 d−1）。除油后餐厨垃圾中的固体有机物和污泥高温发酵的产甲烷速率也快于中温发酵,表明高温发酵有利于提高固体有机物的产气速率。污泥的产气潜能较低,产气速率慢,与餐厨垃圾共发酵有助于调节碱度和防止发酵体系的酸化。