Lateral‐Polarity Structure of AlGaN Quantum Wells: A Promising Approach to Enhancing the Ultraviolet Luminescence

Aluminum‐gallium‐nitride alloys (Al _x Ga_{1– x} N, 0 ≤ x ≤ 1) can emit light covering the ultraviolet spectrum from 210 to 360 nm. However, these emitters have not fulfilled their full promise to replace the toxic and fragile mercury UV lamps due to their low efficiencies. This study demonstrates a promising approach to enhancing the luminescence efficiency of AlGaN multiple quantum wells (MQWs) via the introduction of a lateral‐polarity structure (LPS) comprising both III and N‐polar domains. The enhanced luminescence in LPS is attributed to the surface roughening, and compositional inhomogeneities in the N‐polar domain. The space‐resolved internal quantum efficiency (IQE) mapping shows a higher relative IQE in N‐polar domains and near inversion domain boundaries, providing strong evidence of enhanced radiative recombination efficiency in the LPS. These experimental observations are in good agreement with the theoretical calculations, where both lateral and vertical band diagrams are investigated. This work suggests that the introduction of the LPS in AlGaN‐based MQWs can provide unprecedented tunability in achieving higher luminescence performance in the development of solid state light sources.     

Near‐Infrared (NIR) Organic Light‐Emitting Diodes (OLEDs): Challenges and Opportunities

The rapid development of the science and technology of organic semiconductors has already led to mass application of organic light‐emitting diodes (OLEDs) in television monitors of outstanding quality as well as in a large variety of smaller displays found in smartphones, tablets, and other gadgets, while introduction of the technology to the illumination sector is imminent. Notably, the requirements of all such applications for emission in the visible range of the electromagnetic spectrum are well tuned to the optical and electronic properties of typical organic semiconductors, thereby representing relatively “low‐hanging fruits,” in terms of material development and exploitation. However, the question arises as to whether developing materials suited for efficient near‐infrared (NIR, 700–1000 nm) emission is possible, and, crucially, desirable to enable new classes of applications spanning from through‐space, short‐range communications to biomedical sensors, night vision, and more generally security applications to name but a few. Here, the major fundamental hurdles to be overcome to achieve efficient NIR emission from organic π‐conjugated systems are discussed, recent progress is reviewed, and an outlook for further development of both materials and applications is provided.     

Analysis of an absorption machine driven by the heat recovery on an I.C. reciprocating engine

The present work studies an absorption machine driven by the heat recovery on an internal combustion (i.c.) reciprocating engine. The thermal energy recovered from the i.c. engine exhaust is used to drive a double‐effect water–lithium bromide cycle, while the heat recovered from the cooling jacket of the engine drives a single‐effect water–lithium bromide cycle. The two absorption cycles are integrated into a single unit with a common evaporator and absorber. The absorption unit was first evaluated by a cycle analysis determining the sensitivity to the main boundary conditions and to the internal parameters. Then a specific simulation code of all the different devices of the absorption machine was developed to evaluate the real performance and size of the unit together with its operating condition limits. The absorption machine shows a coefficient of performance around 1, very close to the performance of a traditional double‐effect absorption chiller driven by steam or by a gas burner. The absorption unit could operate with cooling water inlet temperature lower than 35–36°C and refrigerated outlet temperature higher than 3°C. Copyright © 2005 John Wiley & Sons, Ltd.     

Nanoimprinted,Submicrometric, MOF‐Based 2D Photonic Structures: Toward Easy Selective Vapors Sensing by a Smartphone Camera

In this work, a soft‐lithographic approach to fabricate submicrometer metal organic framework (MOF)‐based 2D photonic structures is described. Nanometric zeolitic imidazole framework material ZIF‐8 (zinc) is chosen as the sensible MOF material because of its chemical stability and its vapor selective adsorption properties. Two different systems are fabricated: nanopatterned colloidal ZIF‐8 homo‐ and ZIF‐8/TiO₂ heterostructures. Several features (stripes, squares, etc.) with dimensions of 200 nm are replicated on different substrates such as silicon, flexible plastics, and even aluminum cans, over relatively large surfaces (up to 1 cm²). In addition, the use of these photonic MOF‐heterostructures as very low‐cost sensing platforms compatible with smartphone technology is demonstrated. This method relies on the evaluation of the change in diffraction efficiency of the photonic MOF‐patterns, induced by the MOF refractive index variation, which is simply detected by a charge coupled device (CCD) camera, as those integrated in smartphones, without need for complex optical instrumentations for transduction data processing. Performances of the sensors are first evaluated using isopropyl alcohol adsorption/desorption cycling as a model case. In addition, a “real” environmental issue is tackled. Selective detection of styrene in presence of interfering water is demonstrated at concentrations below the human permissible exposure limit. In situ ellispometric analyses are also carried out in order to confirm the sensor performances and to propose a mechanism for styrene uptake into the nanoMOFs.     

Inpainting of binary images using the Cahn-Hilliard equation.

Image inpainting is the filling in of missing or damaged regions of images using information from surrounding areas. We outline here the use of a model for binary inpainting based on the Cahn-Hilliard equation, which allows for fast, efficient inpainting of degraded text, as well as super-resolution of high contrast images.     

On the impact of physical layer awareness on scheduling and resource allocation in broadband multicellular IEEE 802.16 systems [Radio Resource Management and Protocol Engineering for IEEE 802.16]

Multicellular networks based on the IEEE 802.16 standard appear to be very promising candidates to provide end users with broadband wireless access. However, they also pose interesting challenges in terms of radio resource management, where several design choices are not specified in the standard, intentionally left open to implementors. For this reason, we focus in this article on scheduling and resource allocation, and investigate how they could operate in a cross-layer fashion. In particular, we describe the principles of joint scheduling and resource allocation for IEEE 802.16 operating in AMC mode, and discuss the critical role played by physical layer considerations, especially intercell interference estimation and channel state awareness, in the obtained performance. This leads to identifying key open issues and possible general solutions     

The oral glucose minimal model: estimation of insulin sensitivity from a meal test

Recently, a new approach has been proposed to estimate insulin sensitivity (S(I)) from an oral glucose tolerance test or a meal using an "integral equation". Here, we improve on the "integral equation" by resorting to a "differential equation" approach. The classic glucose kinetics minimal model was used with the addition of a parametric model for the rate of appearance into plasma of oral glucose (Ra). Three behavioral models of Ra were proposed: piecewise-linear (P), spline (S) and dynamic (D). All three models performed satisfactorily allowing a precise estimation of S(I) and a plausible reconstruction of Ra. Mean S(I) estimates were virtually identical: S(I)P = 6.81 +/- 0.87 (SE); S(I)S = 6.53 +/- 0.80; and S(I)D = 6.62 +/- 0.79. S(I) strongly correlated with the integral-equation index (I) S(I)I: r = 0.99, p < 0.01 for models D and S, and r 0.97, p < 0.01 for P. Also, SI compared well with insulin sensitivity estimated from intravenous glucose tolerance test in the same subjects (r = 0.75, p < 0.01; r = 0.71, p < 0.01; r = 0.73, p < 0.01, respectively, for P, S, and D models versus s(I)IVGTT). Finally, the novel approach allows estimation of SI from a shorter test (120 min): model P yielded S(I)R = 7.16 +/- 1.0 (R for reduced) which correlated very well with S(I)P and S(I)I (respectively, r = 0.94, p < 0.01; r = 0.95, p < 0.01) and still satisfactorily with S(I)IVGTT (r = 0.77, p < 0.01).     

Normative three-dimensional patellofemoral and tibiofemoral kinematics: a dynamic, in vivo study.

In order to advance biomechanical modeling, knee joint implant design and clinical treatment of knee joint pathology, accurate in vivo kinematic data of the combined patellofemoral and tibiofemoral joint during volitional activity are critical. For example, one cause of the increased prevalence of anterior knee pain in the female population is hypothesized to be altered tibiofemoral kinematics, resulting in pathological patellofemoral kinematics. Thus, the objectives of this paper were to test the hypothesis that knee joint kinematics vary based on gender and to explore the correlation between the 3-D kinematics of the patellofemoral and tibiofemoral joints. In order to accomplish these goals, a large (n = 34) normative database of combined six degree of freedom patellofemoral and tibiofemoral kinematics, acquired noninvasively during volitional knee extension-flexion using fast-PC (dynamic) magnetic resonance imaging, was established. In this normative database, few correlations between tibiofemoral and patellofemoral kinematics were found. Specifically, tibial external rotation did not predict lateral patellar tilt, as has been stated in previous studies. In general, significant differences could not be found based on gender. Further investigation into these relationships in the presence of pathology is warranted.     

LTE‐based satellite communications in LEO mega‐constellations

The integration of satellite and terrestrial networks is a promising solution for extending broadband coverage to areas not connected to a terrestrial infrastructure, as also demonstrated by recent commercial and standardisation endeavours. However, the large delays and Doppler shifts over the satellite channel pose severe technical challenges to traditional terrestrial systems, as long‐term evolution (LTE) or 5G. In this paper, 2 architectures are proposed for a low Earth orbit mega‐constellation realising a satellite‐enabled LTE system, in which the on‐ground LTE entity is either an eNB (Sat‐eNB) or a relay node (Sat‐RN). The impact of satellite channel impairments as large delays and Doppler shifts on LTE PHY/MAC procedures is discussed and assessed. The proposed analysis shows that, while carrier spacings, random access and RN attach procedures do not pose specific issues and hybrid automatic repeat request requires substantial modifications. Moreover, advanced handover procedures will be also required due to the satellites' movement.