The Effects of Embedded Dipoles in Aromatic Self‐Assembled Monolayers

Using a representative model system, here electronic and structural properties of aromatic self‐assembled monolayers (SAMs) are described that contain an embedded, dipolar group. As polar unit, pyrimidine is used, with its orientation in the molecular backbone and, consequently, the direction of the embedded dipole moment being varied. The electronic and structural properties of these embedded‐dipole SAMs are thoroughly analyzed using a number of complementary characterization techniques combined with quantum‐mechanical modeling. It is shown that such mid‐chain‐substituted monolayers are highly interesting from both fundamental and application viewpoints, as the dipolar groups are found to induce a potential discontinuity inside the monolayer, electrostatically shifting the core‐level energies in the regions above and below the dipoles relative to one another. These SAMs also allow for tuning the substrate work function in a controlled manner independent of the docking chemistry and, most importantly, without modifying the SAM‐ambient interface.     

Nanoimprint Lithography Facilitated Plasmonic-Photonic Coupling for Enhanced Photoconductivity and Photocatalysis

Imprint lithography has emerged as a reliable, reproducible, and rapid method for patterning colloidal nanostructures. As a promising alternative to top-down lithographic approaches, the fabrication of nanodevices has thus become effective and straightforward. In this study, a fusion of interference lithography (IL) and nanosphere imprint lithography on various target substrates ranging from carbon film on transmission electron microscope grid to inorganic and dopable polymer semiconductor is reported. 1D plasmonic photonic crystals are printed with 75% yield on the centimeter scale using colloidal ink and an IL-produced polydimethylsiloxane stamp. Atomically smooth facet, single-crystalline, and monodisperse colloidal building blocks of gold (Au) nanoparticles are used to print 1D plasmonic grating on top of a titanium dioxide (TiO₂) slab waveguide, producing waveguide-plasmon polariton modes with superior 10 nm spectral line-width. Plasmon-induced hot electrons are confirmed via two-terminal current measurements with increased photoresponsivity under guiding conditions. The fabricated hybrid structure with Au/TiO₂ heterojunction enhances photocatalytic processes like degradation of methyl orange (MO) dye molecules using the generated hot electrons. This simple colloidal printing technique demonstrated on silicon, glass, Au film, and naphthalenediimide polymer thus marks an important milestone for large-scale implementation in optoelectronic devices.     

A visible-light and infrared video database for performance evaluation of video/image fusion methods

Multidimensional Systems and Signal Processing - In general, the fusion of visible-light and infrared images produces a composite representation where both data are pictured in a single image. The...     

SIVA: A System for Coverage-Directed State Space Search

We introduce SImulation Verification with Augmentation (SIVA), a tool for coverage-directed state space search on digital hardware designs. SIVA tightly integrates simulation with symbolic techniques for efficient state space search. Specifically, the core algorithm uses a combination of ATPG and BDDs to generate directed input vectors, i.e., inputs which cover behavior not excited by simulation. We also present approaches to automatically generate lighthouses that guide the search towards hard-to-reach coverage goals. Experiments demonstrate that our approach is capable of achieving significantly greater coverage than either simulation or symbolic techniques in isolation.     

Optical Interconnects on and in Printed Circuit Boards

Two types of short distance optical interconnects for on-board applications are presented: Small diameter plastic optical fibre (POF) links and multimode polymer waveguide layers integrated in multilayer printed circuit boards (PCB). POF links with fibre numbers up to 128 and link lengths up to 50 cm are realized with total transmission loss values below 2 dB at 660 nm. First tests of 10 cm long temperature stable multimode polymer waveguides laminated into standard multilayer PCBs demonstrate the capabilities of combined electrical-optical circuit boards.     

Dual-Color InAs/GaSb Superlattice Focal-Plane Array Technology

Within a very few years, InAs/GaSb superlattice technology has proven its suitability for high-performance infrared imaging detector arrays. At the Fraunhofer Institute for Applied Solid State Physics (IAF) and AIM Infrarot-Module GmbH, efforts have been focused on developing mature fabrication technology for dual-color InAs/GaSb superlattice focal-plane arrays for simultaneous, colocated detection at 3 μm to 4 μm and 4 μm to 5 μm in the mid-wavelength infrared atmospheric transmission window. Integrated into a wide-field-of-view missile approach warning system for an airborne platform, a very low number of pixel outages and cluster defects is mandatory for bispectral detector arrays. Process refinements, intense root-cause analysis, and specific test methodologies employed at various stages during the process have proven to be the key for yield enhancements.     

Inverted Organic Solar Cells with Sol–Gel Processed High Work‐Function Vanadium Oxide Hole‐Extraction Layers

For large‐scale and high‐throughput production of organic solar cells (OSCs), liquid processing of the functional layers is desired. We demonstrate inverted bulk‐heterojunction organic solar cells (OSCs) with a sol–gel derived V₂O₅ hole‐extraction‐layer on top of the active organic layer. The V₂O₅ layers are prepared in ambient air using Vanadium(V)‐oxitriisopropoxide as precursor. Without any post‐annealing or plasma treatment, a high work function of the V₂O₅ layers is confirmed by both Kelvin probe analysis and ultraviolet photoelectron spectroscopy (UPS). Using UPS and inverse photoelectron spectroscopy (IPES), we show that the electronic structure of the solution processed V₂O₅ layers is similar to that of thermally evaporated V₂O₅ layers which have been exposed to ambient air. Optimization of the sol gel process leads to inverted OSCs with solution based V₂O₅ layers that show power conversion efficiencies similar to that of control devices with V₂O₅ layers prepared in high‐vacuum.     

Parlay‐based service provision in circuit‐ and packet‐switched telecommunications networks

The spectrum of potential value added services over Internet telephony is wide, but the current service provision solutions are inadequate or proprietary. The nature of Internet differs significantly from that of circuit switched network, however, VoIP architectures can capitalize service control architectures in the PSTN world. We describe such an architecture based on the intelligent network and the Parlay, employing distributed objects and mobile agents as enabling technologies. This architecture has been implemented in the PSTN and the Internet and it has provided a framework for service provisioning, augmenting the space of supported services. Copyright © 2004 John Wiley & Sons, Ltd.     

The Effect of Gradual Fluorination on the Properties of FnZnPc Thin Films and FnZnPc/C60 Bilayer Photovoltaic Cells

Motivated by the possibility of modifying energy levels of a molecule without substantially changing its band gap, the impact of gradual fluorination on the optical and structural properties of zinc phthalocyanine (F_nZnPc) thin films and the electronic characteristics of F_nZnPc/C₆₀ (n = 0, 4, 8, 16) bilayer cells is investigated. UV–vis measurements reveal similar Q‐ and B‐band absorption of F_nZnPc thin films with n = 0, 4, 8, whereas for F₁₆ZnPc a different absorption pattern is detected. A correlation between structure and electronic transport is deduced. For F₄ZnPc/C₆₀ cells, the enhanced long range order supports fill factors of 55% and an increase of the short circuit current density by 18%, compared to ZnPc/C₆₀. As a parameter being sensitive to the organic/organic interface energetics, the open circuit voltage is analyzed. An enhancement of this quantity by 27% and 50% is detected for F₄ZnPc‐ and F₈ZnPc‐based devices, respectively, and is attributed to an increase of the quasi‐Fermi level splitting at the donor/acceptor interface. In contrast, for F₁₆ZnPc/C₆₀ a decrease of the open circuit voltage is observed. Complementary photoelectron spectroscopy, external quantum efficiency, and photoluminescence measurements reveal a different working principle, which is ascribed to the particular energy level alignment at the interface of the photoactive materials.