Modification of coconut fibers with polyaniline for manufacture of pressure‐sensitive devices

This article studies the modification of coconut fibers with polyaniline (PAni) with help of statistical experimental design techniques. The main factors studied here were the techniques used for particle dispersion (sonication vs. magnetic stirring) and the type of initiator (ammonium persulfate, APS, vs. ammonium cerium sulfate dihydrate, Ce(IV)). The obtained materials were characterized through low field nuclear magnetic resonance, small‐and wide‐angle X‐ray scattering, scanning electron microscopy, fourier transform infrared spectroscopy, and ultraviolet–visible spectroscopy. Additionally, the electrical resistivities and respective sensitivities to variations of the applied pressure were evaluated for all obtained samples, with help of standard volume resistivity measurements and electro‐mechanical tests. The materials prepared through magnetic stirring with APS presented the best electrical and electromechanical properties, although materials prepared through sonication with Ce(IV) also presented good electrical and electromechanical properties and could be prepared much faster. As a consequence, modification of coconut fibers with PAni, using sonication as the particle dispersion technique and Ce(IV) as initiator, constitutes a very promising procedure for manufacture of pressure‐sensitive devices. POLYM. ENG. SCI., 54:2887–2895, 2014. © 2014 Society of Plastics Engineers     

Nanosized dispersions based on chitosan and NaPSS

Interpolyelectrolyte complexes (IPECs) were obtained by the solution mixing method from chitosan and poly(sodium 4-styrenesulfonate), NaPSS. XRD, FTIR spectroscopy, and thermogravimetric analysis indicated that IPEC formation inhibits the occurrence of crystalline regions in the resultant solid IPECs. Turbidimetry, viscometry, conductometry, and zeta potential measurements showed that at a sulfonate to aminium molar ratio = 1, the process of IPEC production is optimum. Average hydrodynamic diameters, calculated from DLS measurements, showed that IPEC formation occurs in two stages: first there is a decrease in macromolecular dimensions, as sulfonate to aminium molar ratio is increased. At a characteristic sulfonate to aminium molar ratio, soluble IPEC structures collapse to form phase segregated clusters that begin to nucleate the formation of larger, insoluble, IPEC particles.     

Adaptive input shaping for single-link flexible manipulators using an algebraic identification

This work proposes an adaptive control scheme applied to single link-flexible manipulators, which combines a feedback controller of the joint angle with an adaptive input shaper updated by an algebraic non-asymptotic identification. The feedback controller is designed to guarantee trajectory tracking of the joint angle, simplifying thus the input shaper, which can be designed for the arm dynamics only. The input shaper is updated by an algebraic identification of the natural frequency corresponding to the first vibration mode of the arm. In addition, the influence of the assumptions adopted to derive the algebraic identification on the performance of the estimation is studied. Finally, the proposed adaptive control strategy is implemented in practice.     

Current concepts: tissue engineering and regenerative medicine applications in the ankle joint

Tissue engineering and regenerative medicine (TERM) has caused a revolution in present and future trends of medicine and surgery. In different tissues, advanced TERM approaches bring new therapeutic possibilities in general population as well as in young patients and high-level athletes, improving restoration of biological functions and rehabilitation. The mainstream components required to obtain a functional regeneration of tissues may include biodegradable scaffolds, drugs or growth factors and different cell types (either autologous or heterologous) that can be cultured in bioreactor systems (in vitro) prior to implantation into the patient. Particularly in the ankle, which is subject to many different injuries (e.g. acute, chronic, traumatic and degenerative), there is still no definitive and feasible answer to ‘conventional’ methods. This review aims to provide current concepts of TERM applications to ankle injuries under preclinical and/or clinical research applied to skin, tendon, bone and cartilage problems. A particular attention has been given to biomaterial design and scaffold processing with potential use in osteochondral ankle lesions.     

Analytical Tools Used to Distinguish Chemical Profiles of Plants Widely Consumed as Infusions and Dietary Supplements: Artichoke,Milk Thistle,and Borututu

Artichoke, borututu, and milk thistle are three medicinal plants widely consumed as infusions or included in dietary supplements (e.g., pills and syrups). Despite the high consumption of these plants, studies on their nutritional value and primary metabolites are scarce, with their composition in secondary metabolites such as phenolic compounds being only reported. Therefore, their nutritional value was assessed, and analytical tools (liquid and gas chromatography coupled to different detectors) were used to distinguish their chemical profiles according to their hydrophilic (sugars and organic acids) and lipophilic (fatty acids and tocopherols) components. Chromatographic techniques are important analytical tools used in the identification and quantification of several molecules, also being a standard requirement to distinguish different profiles. Borututu gave the highest energetic value with the highest content of carbohydrates and fat, sucrose and total sugars, shikimic and citric acids, and α-, β-, δ-, and total tocopherols. Artichoke had the highest ash and protein contents, oxalic acid, SFA (mainly palmitic acid), and γ-tocopherol, and also the best n-6/n-3 ratio. Milk thistle showed the highest levels of fructose and glucose, quinic acid and total organic acids, and PUFA, mainly linoleic acid, and the best PUFA/SFA ratio. The hydrophilic compounds identified in the studied plants, mostly sugars, are responsible for the energy contribution of their widely consumed infusions. Otherwise, the bioactivity of lipophilic compounds, namely, unsaturated fatty acids and tocopherols, is lost in those preparations but can be recovered in dietary supplements based on the plants. As far as we know, this is the first report on the detailed composition of the three plants regarding their nutritional features.     

Modelling group processes and effort estimation in project management using the Choquet integral: An MCDM approach

We investigate the group processes involved in effort estimation in the context of project management. The groups considered are formed by “experts” (people with specific technical competence) and “non-experts” (people with less specific technical competence, usually experts in related fields), because the typically complementary bias of the two classes contribute to a more balanced estimate. In this paper we exploit further the synergies between experts and non-experts in an MCDM framework, aggregating the individual estimates by means of non-additive Choquet integration, and representing the complementary bias by the multiagent interaction structure underlying the capacity. We present some examples and computer simulations whose aggregation results outperform those of the classical weighted mean (additive case), showing lower MMRE (mean magnitude of the relative error between the central estimate and the actual value) and higher HitRate (at which the interval estimate contains the actual value).     

Characterizing landscape changes in central Rondonia using Landsat TM imagery

An analysis of landscape changes in a region of pioneer settlements in central Rondonia, western Brazilian Amazon, was derived from Landsat TM data. Total deforested area increased from 206 x 103 ha in 1977, to 565 x 103 ha in 1985 and to 1210 x 103 ha, or 35.5% of the region, in 1995. Eighty-one per cent of the total 1995 deforestation had occurred in regions within 12.5km from areas of pioneer colonization deforested by 1977. Deforested area exceeded 79% in regions within 12.5km from the region's first road.     

Combination of Reaction and Separation in Heterogeneous Catalytic Hydrogenation of Ethylformate

Continuous hydrogenation reaction of ethyl benzoylformate was studied over a (–)‐cinchonidine (CD)‐modified Pt/Al₂O₃ catalyst. The catalyst showed a good stability, and high enantioselectivity was achieved in the fixed‐bed reactor. Chromatographic separation of (R)‐ and (S)‐ethyl mandelate originating from a post‐continuous hydrogenation reaction of ethyl benzoylformate over the (–)‐CD‐modified Pt/Al₂O₃ catalyst was investigated in the same reaction mixture. A commercial column filled with a chiral selector resin was chosen as a perspective preparative‐scale adsorbent. Since adsorption equilibrium isotherms were linear within the entire investigated range of concentrations, they were determined by pulse experiments for the isomers present in a post‐reaction mixture. Breakthrough curves were measured and described successfully by the dispersive plug‐flow model with linear driving force approximation.     

FeO0.7F1.3/C Nanocomposite as a High‐Capacity Cathode Material for Sodium‐Ion Batteries

Searching high capacity cathode materials is one of the most important fields of the research and development of sodium‐ion batteries (SIBs). Here, we report a FeO_0.7F_1.3/C nanocomposite synthesized via a solution process as a new cathode material for SIBs. This material exhibits a high initial discharge capacity of 496 mAh g^?1 in a sodium cell at 50 °C. From the 3^rd to 50^th cycle, the capacity fading is only 0.14% per cycle (from 388 mAh g^?1 at 3^rd the cycle to 360 mAh g^?1 at the 50^th cycle), demonstrating superior cyclability. A high energy density of 650 Wh kg^?1 is obtained at the material level. The reaction mechanism studies of FeO_0.7F_1.3/C with sodium show a hybridized mechanism of both intercalation and conversion reaction.