Differential Display of Investigative Behavior Permits Discrimination of Scent Signatures from Familiar and Unfamiliar Socially Dominant Female Marmoset Monkeys (Callithrix jacchus)

The hypothesis was tested that marmosets have differential displays of investigatory behavior towards circumgenital scent marks from socially dominant females based on degree of familiarity. In a series of two-choice behavioral discrimination bioassays, dominant males together with subordinate and dominant females were presented concurrently with scent secretions from familiar versus unfamiliar dominant females, and their investigative behaviors towards the scent were recorded. Test animals directed significantly different amounts of investigative behaviors towards familiar versus unfamiliar scents when the scent stimuli involved complete circumgenital scent marks, glandular secretion only, or urine only. When animals discriminated between the two scent samples, they did so by directing significantly increased amounts of behavior to scent from unfamiliar females. Chemical cues promoting differential displays of behavior to familiar versus unfamiliar scents appeared to be volatile in nature and were effective in the scent mark for at least one day following deposition. The reliable ability of marmosets to consistently discriminate between odors from familiar versus unfamiliar dominant females provides strong circumstantial evidence that individual female marmosets have distinct chemical signatures. The ability of marmosets to discriminate the odor from familiar versus unfamiliar dominant females may be important in the context of intergroup relations.     

Activated gas plasma surface treatment of polymers for adhesive bonding

Polyethylene, polypropylene, poly(vinyl fluoride) (Tedlar), polystyrene, nylon 6, poly(ethylene terephthalate) (Mylar), polycarbonate, cellulose acetate butyrate, and a poly(oxymethylene) copolymer were treated with activated helium and with activated oxygen. Mechanical strengths of adhesive-bonded specimens prepared from treated and from untreated coupons were compared. Polyethylene (PE) and polypropylene (PP) showed the greatest increases in bond strength. Oxygen and helium were both effective with polyethylene, but polypropylene showed no improvement when treated with activated helium. The results with excited helium parallel the effects of ionizing radiation on these two polymers, as does the appearance of unsaturation bands in the infrared (965 cm^?1 in PE, and 887 and 910 cm^?1 in PP). Active nitrogen produced excellent bond strength with polyethylene but not with polypropylene. Of the remaining polymers examined, Tedlar, polystyrene, and nylon 6 showed the greatest improvement in bondability after treatment, and Mylar showed moderate improvement. Polycarbonate, cellulose acetate butyrate, and the poly(oxymethylene) copolymer gave approximately two-fold increases in lap-shear bond strength. In several cases, significant differences in response to time of treatment and type of excited gas were found.     

Experiences from using heat integration software to determine retrofit opportunities within a refinery process

Heat integration techniques can be used to optimize the energy requirement for both new and retrofit plant designs. Software tools for identifying retrofit options are becoming available. This paper reports our experiences from using heat exchanger network (HEN) optimization software for a retrofit case study of an oil refinery process. The HEN optimization software was used to automate the search for the most beneficial retrofit designs following the twostage process proposed by Asante and Zhu. The software provided three potential retrofit designs. Results from this analysis were used as the basis of a rigorous mass and energy balance simulation of the plant. The simulation corroborated the energy savings, but there were some important differences. The simulation required 20% more heat exchange area. Furthermore, the retrofit design involving one topology change was shown to be less economic than an alternative design. These differences are discussed and a revised methodology is proposed.     

Prevention of water pollution problems in mining: The bactericide technology

In pyritic environments, the bacteriaThiobacillus ferrooxidans catalyze acid formation by increasing the oxidation rate of pyrite by a factor of one million. This acid solubilizes metals and pollutes adjacent streams and lands. Bactericide sprays during mining and waste disposal operations attack the source of the problem by preventing acid formation and metals solubilization. Used in conjunction with current water treatment systems, bactericides can dramatically reduce operating costs. Controlled release bactericides contribute to successful reclamation by providing assurance against revegetation failure and post-reclamation water quality problems that can necessitate perpetual water treatment. While inhibitingT. ferrooxidans these organic compounds aid in the establishment of beneficial heterotrophic bacteria which support vegetation. These conditions continue to persist after the bactericide is depleted from the controlled release system. Case Studies I and II show that bactericides inhibit acid generation during hard rock and coal mining operations and they are cost effective. Case Studies III and IV illustrate the improvement in water quality and vegetation after reclamation when controlled release bactericides were used. Economic analyses show cost benefits are achieved when controlled-release bactericides are part of the reclamation plan.     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

Temperature and processing effects on lithium ion conductivity of solution-deposited lithium zirconium phosphate (LiZr2P3O12) thin films

Lithium zirconium phosphate (LiZr₂P₃O₁₂) thin films have been prepared on platinized silicon substrates via a chemical solution deposition approach with processing temperatures between 700°C and 775°C. Films that were subject to a single high-temperature anneal were found to crystallize at temperatures above 725°C. Crystallization was observed in films annealed after each deposited layer at 700°C and above. In both cases, grain size was found to increase with annealing temperature. Ion conductivity was found to increase with annealing temperature in singly annealed films. In per-layer annealed films ion conductivity was found to initially increase then decrease with increasing annealing temperature. A maximum ion conductivity of 1.6 × 10⁻⁶ S/cm was observed for the singly annealed 775°C condition, while a maximum ion conductivity of 5.8 × 10⁻⁷ S/cm was observed for the 725°C per-layer annealed condition. These results are consistent with an increasing influence of cross-plane, internal interface resistance and vapor phase carrier loss in the per-layer annealed samples. This work demonstrates that post-deposition processing methods can strongly affect the ion conducting properties of LiZr₂P₃O₁₂ thin films.     

The influence of oxygen vacancies on piezoelectricity in samarium-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics

A study of 0.71Pb(Mg_1/3Nb_2/3)O₃-0.29PbTiO₃ shows that, when it is doped with 2.5% Sm on the A-site, in addition to an almost threefold increase in piezoelectric charge coefficient and dielectric permittivity, there is a 2 order of magnitude reduction in conductivity, attributed to a decrease in oxygen vacancy concentration. An analysis of the nonlinearity of permittivity with respect to field amplitude shows that both the reversible and irreversible contributions increase significantly with Sm-doping, with simple models showing that these changes are consistent with a reduction in the concentration of dipolar defects that can inhibit both polarization rotation and domain wall translation. Contrary to the argument that doping increases heterogeneity, there is little change in the diffuseness of the peak in permittivity as a function temperature, whilst there is a 15% increase in spontaneous polarization with Sm addition. Through comparison of the Rayleigh law parameters with those published for other piezoelectric materials, it is concluded that a significant contribution to the observed increase in piezoelectric performance due to Sm-doping of PMN-PT is similar in origin to that seen in soft, donor-doped PZT and other conventional piezoelectric ceramics.     

Tailorable thermal expansion in leucite-pollucite materials derived from geopolymers for environmental barrier coatings

The K[AlSi₂O₆]-Cs[AlSi₂O₆] pseudo-binary system was synthesized by geopolymer crystallization. The thermal expansion properties of these materials were studied by in situ high-temperature X-ray diffraction to characterize thermal expansion behavior for potential application as environmental barrier coatings. Tailorable thermal expansion through changing cation stoichiometry allowed reduced thermal expansion mismatch with SiC_f/SiC composites compared to rare-earth-based coatings.     

Aromatic bisphenol A-based elastomers via hydrosilylation chemistry

The preparation of highly aromatic elastomers from a bisphenol A-based divinyl-terminated resin and polymerization with various aromatic silane containing compounds utilizing a room temperature hydrosilylation reaction is demonstrated. The polymers exhibit high thermal and oxidative stability with 5% weight losses around 430 and 350°C and char yields ranging from 35% to 40%. The thermosets maintained their elastomeric properties with good hardness and mechanical properties as measured by elongation measurements. The toughness of the thermosets was not improved with the inclusion of aromatic moieties but the hardness did appear to increase with the addition of more aromatic groups.     

The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)

Direct laser deposition (DLD) is an additive manufacturing process that builds up a part layer-by-layer by fusing metal powder to a solid substrate. A coaxial laser and powder delivery head is commonly used, and here a critical process variable is the standoff distance between the nozzle and the material deposition point. This contribution investigates the role of this variable and the effect that it has on the final part geometry. The experimental results show that good layer consistency can, in fact, be obtained with no movement of the substrate between layers for more than 20 layers, or 10 mm under tested conditions, and that poorer results are obtained by regular movement of the substrate by a badly chosen constant amount. A theoretical analysis of the situation establishes a method to estimate melt pool size using an analytically calculated temperature near the heat source. Based on this, simple heat and mass flow models are established to allow some of the results to be explained.