Trace metals and organochlorines in the bamboo shark Chiloscyllium plagiosum from the southern waters of Hong Kong, China

The bamboo shark Chiloscyllium plagiosum is an abundant benthic species along the shallow continental shelf of Southeast Asia. It is commonly taken by fishermen in China, India, Taiwan and Thailand for human consumption. This study measured trace metal and organochlorine concentrations in C. plagiosum collected from the southern waters of Hong Kong, China. Metals (Ag, Cd, Cr, Cu, Mn, Ni, Pb and Zn) were measured in three different tissues: dorsal muscle, spleen and liver. Polychlorinated biphenyls (PCBs) and chlorinated pesticides in the dorsal muscle were identified and quantified using gas chromatography. Metal concentrations varied among the three different tissues, with liver having higher levels of Ag and Cd, and spleen possessing higher levels of Cu and Mn. Both Ni and Pb in all tissues were below the detection limit. Tissue concentrations of Cr, Cu, Mn and Zn generally decreased with increasing body weight whilst no significant concentration-size relationship was found for other metals. In muscle tissues, total PCBs ranged from 1.056-4.771 ng/g (wet wt.) with a median of 1.801 ng/g, while total DDTs ranged from 0.602-23.55 ng/g with a median of 1.109 ng/g, in which p,p'-DDE was the predominant metabolite. Levels of total hexachlorohexanes and cyclodienes were low. The pesticide p,p'-DDT was the only compound found to be positively correlated with body weight, indicating temporal bioaccumulation of this compound. Zn concentrations in the muscle of C. plagiosum were comparatively higher than recorded in other shark species, however, concentrations of other metals and organochlorines were relatively low. C. plagiosum feeds primarily on polychaetes, shrimps and small fishes, and thus is unlikely to contain levels of contaminants of human health concern.     

Dietary exposure to copper in the European Union and its assessment for EU regulatory risk assessment

EU legislation requires a multimedia exposure assessment for substances supplied within the EU. Dietary intake is the main source of exposure for the majority of the population hence an essential component of the human risk assessment. This paper describes the available data for dietary copper and its use in estimating daily intake including variability and determinants of exposure. Typical and reasonable worst-case estimates are derived for the general population from the available peer reviewed literature. Intakes from drinking water are found to exhibit more variability than those from food. Therefore, different exposure scenarios are derived to reflect the range of acute and chronic exposures that may occur. Estimates of typical copper intakes for the EU population are in the range 0.8-1.8 mg/day. Typical copper intakes of men are higher than those of women while the intake among the general adult population is higher than that of the elderly. Intakes of both men and women are generally close to the WHO normative requirements but may be somewhat lower in specific locations where background levels of copper are unusually low. Alcoholic beverages represent minor contribution daily copper intakes. Intakes for children are rather variable ranging broadly from 0.7 to 1.5 mg/day and are somewhat age and sex dependent. Greater uncertainty applies to the assessment of local exposure incorporating food produced on land directly impacted by contemporary copper industry emissions. Specifically, the extent to which soil is enriched in copper in these conditions is unclear. However, effective homeostatic control mechanisms in plants limit uptake and transfer to the human food chain. A best estimate of 0.25 mg/day in addition to regional exposure was derived. Drinking water is estimated to contribute only marginally to total copper intake in most cases. Higher intakes may occur in areas of poor water quality and/or corroded distribution systems. Such elevated exposures appear unusual but their frequency is unknown.     

Improvement of predicted fine and total particulate matter (PM) composition by applying several different chemical scenarios: a winter 2005 case study

A new method using several different chemical scenarios is developed to predict chemical composition of fine (PM2.5) and total (PM10) aerosol. This method improves the accuracy of predicted PM concentrations. The Mesoscale Model version 5 (MM5) and a 3-dimensional Eulerian chemical model (CAMx4.2) are used to predict PM2.5 and PM10 concentrations using gridded input emissions (from the "Total" group) over a 48-72 h time period for Christchurch (New Zealand) for winter 2005. The aerosol concentrations are obtained for four different chemical compositions (chemical scenarios) of the input aerosol emissions. PM2.5 chemical compositions are based on previous Christchurch winter studies and from observations in other countries with similar winter pollution problems, and used in CAMx4.2 to model seven winter 2005 heavy pollution episodes. The error between observed and modelled PM2.5 concentrations is based on predictions of fine aerosol that are derived from linear regression with PM10. It is used to find the minimum difference between modelled and observed PM2.5 for an observation site located in the Christchurch residential area. Combination of the chemical scenarios with analysis of the minimum error is used to create a new complex chemical scenario. The new complex scenario is used to re-calculate all pollution episodes to obtain new values of PM with minimum error compared with observed aerosol concentrations. Mean Absolute Error of the calculated PM2.5 (for all pollution episodes) decreased from 21-24 microg m(-3) to 14-16 microg m(-3) compared with observations. The chemical composition of the modelled PM2.5 is also discussed.     

Density effects on activated sludge zone settling velocities

A recently developed method to manipulate biomass density based on the addition of synthetic microspheres was used to isolate density effects on zone (hindered) settling velocities in samples from full-scale activated sludge plants over a range biomass densities and concentrations. Settling velocities increased by as much as a factor of five as density was increased by microsphere addition. The effects of density on the Vesilind sedimentation model parameters (V=V(o)e(-kX) , where V is the settling velocity, X is the biomass concentration, and V(o) and k are constants) were evaluated. The parameter V(o) was positively correlated with density for values greater than approximately 1.02 g/mL, while k values were approximately constant in this range. New models were developed for settling velocity as a function of both density and biomass concentration, and these may be useful for future incorporation with clarifier models to improve predictions of system performance, particularly when biomass characteristics known to affect density are variable, such as polyphosphate and nonvolatile suspended solids content.     

Filament content threshold for activated sludge bulking: artifact or reality?

An often-noted feature of activated sludge settleability is the existence of a threshold content of filamentous bacteria, below which filaments have a relatively small effect on settleability, and above which settleability is much more sensitive to filament content. This concept has historically been based on an apparent inflection point in settleability/filament content curves. However, this was demonstrated to be an artifact of data presentation on semi-logarithmic scales. Analyses of several published data sets indicated that there was little or no evidence of a threshold effect when data were presented on linear scales, particularly around the 150 mL/g sludge volume index (SVI) "threshold". Rather, there appears to be a generally continuous (and often nearly linear) relationship between filament content and SVI, suggesting that the threshold effect, as commonly perceived, is not accurate. A modified empirical model of filament content and settleability was also presented.     

Incorporating a Polyethyleneglycol Linker to Enhance the Hydrophilicity of Mitochondria-Targeted Triphenylphosphonium Constructs

The targeting of bioactive molecules and probes to mitochondria can be achieved by coupling to the lipophilic triphenyl phosphonium (TPP) cation, which accumulates several hundred-fold within mitochondria in response to the mitochondrial membrane potential (Δψ_m). Typically, a simple alkane links the TPP to its “cargo”, increasing overall hydrophobicity. As it would be beneficial to enhance the water solubility of mitochondria-targeted compounds we explored the effects of replacing the alkyl linker with a polyethylene glycol (PEG). We found that the use of PEG led to compounds that were readily taken up by isolated mitochondria and by mitochondria inside cells. Within mitochondria the PEG linker greatly decreased adsorption of the TPP constructs to the matrix-facing face of the mitochondrial inner membrane. These findings will allow the distribution of mitochondria-targeted TPP compounds within mitochondria to be fine-tuned.     

Development of a Liquid Chromatography Tandem Mass Spectrometric Method for Simultaneous Determination of 15 Aminoglycoside Residues in Porcine Tissues

A quantitative and confirmatory method has been developed for simultaneous determination of 15 aminoglycoside (AG) residues in porcine tissues (muscle, liver and kidney) by liquid chromatography tandem mass spectrometry (LC-MS/MS). The analytes were extracted from different matrices with aqueous trichloroacetic acid solution (5 %, w/v) followed by solid phase extraction (SPE) clean-up under optimised conditions. Due to the different pK _a values of the compounds, two consecutive SPE steps using Oasis HLB cartridges were used to purify all 15 AGs from sample extracts, with 9 AGs quantitatively retained on Oasis HLB cartridges at pH?<1 and the other 6 AGs retained at pH 8.5. The analytes were separated on a reversed-phase C18 column and eluted with water and acetonitrile containing the ion-pair reagent heptafluorobutyric acid (HFBA). The LC-MS/MS method was validated according to Decision 2002/657/EC. The optimised procedure was successfully applied to analyse 100 real porcine tissue samples (60 muscles, 20 livers and 20 kidneys) collected from local markets in southern China, demonstrating that the method is robust and useful for determination of residues of the 15 target AGs in porcine tissue samples.     

益生菌种的应用和市场趋势

本文对全球益生菌种的最新研究及市场趋势作一简要阐述,同时,也对丹尼斯克公司在益生菌种的此前沿领域应用研究进展作了介绍.     

Effect of calcium chloride on mechanical properties and microbiological characteristics of cv. Conservolea naturally black olives fermented at different sodium chloride levels

The effect of calcium chloride (CaCl₂)(5 gL^?1) and sodium chloride (NaCl) concentration (40, 60 and 8 gL^?1) on the microbiological and mechanical properties of naturally black olives of cv. Conservolea in brines was studied. In 40 and 60 g L^?1 brines the growth of lactic acid bacteria was favoured over that of yeasts, resulting in rather complete lactic acid fermentation as indicated by high free acidity (9.8–11.5 g lactic acid L^?1) and low pH (3.7–3.8). At 80 g L^?1 brine, yeasts were the dominant members of the microflora, rendering a product with lower acidity (8 g lactic acid L^?1) and higher pH (4.3–4.5). In the presence of CaCl₂ there was a consistent increase in the depth of the peripheral region in which cell wall breakage occurred. When cells separated, perforated walls were observed at sites associated with plasmodesmata. The flesh was strongest and stiffest when CaCl₂ was added to olives treated with 40 g L^?1 brine, consistent with cell wall breakage being the predominant mode of failure. The only observed effect on the mechanical properties of the skin was a stiffening at 60 g L^?1 brine on addition of CaCl₂. Copyright © 2007 Society of Chemical Industry     

Ripening‐related changes in the cell walls of olive (Olea europaea L.) pulp of two consecutive harvests

Olive fruits, harvested in two consecutive seasons at green, cherry and black stages, were used to study compositional changes in the cell walls during ripening. Ripening‐related changes in both harvests were characterised mainly by an increase in the solubilisation of pectic and hemicellulosic polysaccharides, an increase in the relative amount of arabinose in pectic polysaccharides and a decrease in the degree of methylesterification of pectic polysaccharides. Further to degrading processes, the data obtained suggest the synthesis of new polysaccharides. The analysis of olive cell wall phenolics showed mainly the presence of p‐coumaric acid, which increased in one harvest, whereas in the other the values did not differ. The samples of the second harvest, although presenting green, cherry and black colours, had less distinct ripening characteristics than those of the previous harvest. Different activity levels of polyphenol oxidase, polygalacturonase and pectin methylesterase might have contributed to the differences observed between the two harvests. The results showed the distinct extension of ripening‐related changes in the cell walls of the two harvests, indicating that the olive colour, although characteristic of the stage of ripening, cannot be strictly used for its evaluation and definition. Copyright © 2006 Society of Chemical Industry