γ‐Irradiation preparation of poly(acrylic acid)–chitosan hydrogels for in vitro drug release

Biocompatible and biodegradable pH‐responsive hydrogels based on poly(acrylic acid) and chitosan were prepared for controlled drug delivery. These interpolymeric hydrogels were synthesized by a γ‐irradiation polymerization technique. The degree of gelation was over 96% and increased as the chitosan or acrylic acid (AAc) content increased. The equilibrium swelling studies of hydrogels prepared under various conditions were carried out in an aqueous solution, and the pH sensitivity in a range of pH 1–12 was investigated. The AAc/chitosan hydrogels showed the highest water content when 30 vol % AAc and 0.1 wt % chitosan were irradiated with a 30 kGy dose of radiation. In addition, an increase of the degree of swelling with an increase in the pH was noticed and it had the highest value at pH 12. The drug 5‐fluorouracil was loaded into these hydrogels and the release studies were carried out in simulated gastric and intestinal fluids. The in vitro release profiles of the drugs showed that more than 90% of the loaded drugs were released in the first 1 h at intestinal pH and the rest of the drug was released slowly. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3270–3277, 2003     

Preparation and properties of polyelectrolyte complex sponges composed of hyaluronic acid and chitosan and their biological behaviors

Polyelectrolyte complexes (PECs) composed of chitosan and hyaluronic acid (HA) were prepared in various pH regions and at different weight ratios. At low pHs, there was a strong ionic interaction between NH groups in chitosan and both COO^? and COOH groups in HA due to the deprotonation of HA, whereas weak linkages were formed at high pHs because only the carboxyl groups of HA could interact with NH groups in chitosan. The formation of PECs resulted in a decrease in the crystallinity and thermal stability caused by the interactions between polyions. With variations in the degree of ionization of polyions at various pH conditions, novel PEC sponges were prepared by the freeze drying of PEC solutions. Furthermore, for the evaluation of the wound‐healing effect of PEC sponges with or without an antimicrobial agent (silver sulfadiazine), they were applied to a full‐skin defect of a Wistar rat in vivo. The histology and computerized morphometric analysis of the epidermal healing confirmed the proliferation of fibroblasts in the wound bed and a distinct reduction in infectious agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 925–932, 2003     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

Synthesis,microstructure, and magnetic properties of monosized Mn x Zn y Fe3 ? x ? y O4 ferrite nanocrystals

We report the synthesis and characterization of ferrite nanocrystals which exhibit high crystallinity and narrow size distributions. The three types of samples including Zn ferrite, Mn ferrite, and Mn-Zn ferrite were prepared via a non-aqueous nanoemulsion method. The structural, chemical, and magnetic properties of the nanocrystals are analyzed by transmission electron microscopy, X-ray diffraction, X-ray fluorescence, and physical property measurement system. The characterization indicates that the three types of ferrite nanocrystals were successfully produced, which show well-behaved magnetic properties, ferrimagnetism at 5 K and superparamagnetism at 300 K, respectively. In addition, the magnetization value of the ferrites increases with the increasing concentration of Mn.     

Flow-induced voltage generation over monolayer graphene in the presence of herringbone grooves

While flow-induced voltage over a graphene layer has been reported, its origin remains unclear. In our previous study, we suggested different mechanisms for different experimental configurations: phonon dragging effect for the parallel alignment and an enhanced out-of-plane phonon mode for the perpendicular alignment (Appl. Phys. Lett. 102:063116, 2011). In order to further examine the origin of flow-induced voltage, we introduced a transverse flow component by integrating staggered herringbone grooves in the microchannel. We found that the flow-induced voltage decreased significantly in the presence of herringbone grooves in both parallel and perpendicular alignments. These results support our previous interpretation.     

Effects of annealing on performances of 1.3-μm InAs-InGaAs-GaAs quantum dot electroabsorption modulators

In this work, we investigated the effects of quantum dot (QD) annealing (as-grown, 600°C-annealed, and 750°C-annealed) on the preliminary performances of 1.3-μm InAs-InGaAs-GaAs quantum dot electroabsorption modulators (QD-EAMs). Both extinction ratio and insertion loss were found to vary inversely with the annealing temperature. Most importantly, the 3-dB response of the 750°C-annealed lumped-element QD-EAM was found to be 1.6 GHz at zero reverse bias voltage - the lowest reverse bias voltage reported. We believe that this work will be beneficial to researchers working on on-chip integration of QD-EAMs with other devices since energy consumption will be an important consideration.     

Broadband Ge/SiGe quantum dot photodetector on pseudosubstrate

We report the fabrication and characterization of a ten-period Ge quantum dot photodetector grown on SiGe pseudosubstrate. The detector exhibits tunable photoresponse in both 3- to 5- μm and 8- to 12- μm spectral regions with responsivity values up to about 1 mA/W at a bias of −3 V and operates under normal incidence radiation with background limited performance at 100 K. The relative response in the mid- and long-wave atmospheric windows could be controlled through the applied voltage.     

The Characterisation of Pluripotent and Multipotent Stem Cells Using Fourier Transform Infrared Microspectroscopy

Fourier transform infrared (FTIR) microspectroscopy shows potential as a benign, objective and rapid tool to screen pluripotent and multipotent stem cells for clinical use. It offers a new experimental approach that provides a holistic measurement of macromolecular composition such that a signature representing the internal cellular phenotype is obtained. The use of this technique therefore contributes information that is complementary to that acquired by conventional genetic and immunohistochemical methods.     

Conjugated polymer mediated synthesis of nanoparticle clusters and core/shell nanoparticles

Two water soluble conjugated polymers, poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and ammonium ion stabilized poly(phenylene vinylene) (P2), are found to be able to reduce noble metal ions to zero-valent metals via a direct chemical deposition technique. Au nanoparticle clusters can be obtained through reduction of Au³⁺ ions by PEDOT:PSS and the electronic coupling between them can be controlled by HAuCl₄ concentration. Core/shell Ag/polymer nanostructures are prepared from reduction of Ag⁺ ions by P2, which have a ppb detection limit for 4-MBA using surface-enhanced Raman spectroscopy (SERS). This conjugated polymer mediated synthesis of metal nanoparticles may open a new avenue for fabricating nanomaterials and nanocomposites with tunable optical properties that are dominated by their structure and electronic coupling between nanoparticles.     

A new route for the synthesis of β-sialon: Eu2+ phosphors using pyrophyllite powders

Eu²⁺ ion doped β-sialon (Si_6?zAl_zO_zN_8?z:xEu²⁺) phosphors were prepared from pyrophyllite-based mixtures by a carbothermal reduction and nitridation method first. Then, the effects of z values and the Eu concentration on the structure and the photoluminescence (PL) properties were investigated. β-Sialon was successfully synthesized as a dominant phase even at the low temperature of 1500 °C, while Si₃N₄ and AlN weakly coexisted as secondary phases. The PL excitation spectra exhibited the broad spectra covering up to 500 nm, and the greenish-yellow emission was observed at around 580 nm. At z=1 and x=0.012, excellent emission intensity could be attained.