Flash Lamps as Ignition and Initiation Sources of the VS-2 Pyrotechnic Composition

In the present work it is found that the pyrotechnic composition VS-2 can be initiated with flash lamps IFC-500 and EVIS. VS-2 pyrotechnic composition contains 90% of mercury（Ⅱ） 5-hydrazinotetrazolate perchlorate and 10% of optically transparent copolymer of 2-methyl-5-vinyltetrazole and methacrylic acid （PVMT）. We have found that the flash lamps make it possible to initiate combustion of VS-2 composition with its transition to detonation both in cylindrical charges placed in brass caps of 5 mm diameter and 2 mm high， and film charges with 10 mm×80 mm in size and surface weights of 60 mg·cm^-2 and 90 mg·cm^-2， showing ignition delay times 10 μs and 3 μs， respectively. We also measured detonation velocities for VS-2 composition film charges， which were 4375-4505 m·s^-1 （of the charge being surface mass 60 mg·cm^-2） and 4221-4281 m·s^-1 （of the charge being surface mass 90 mg·cm^-2） and their blasting action on the aluminum plate. The depths of the normal shock wave imprints at the charge-barrier interface were 0.6-0.7 mm （for surface mass of the film charges 60 mg·cm^-2） and 1.2-1.3 mm （for surface mass of the film charges 90 mg·cm^-2）.     

Kinetics of Soybean Oil Hydrolysis on Niobium Catalysts

The catalytic hydrolysis of soybean oil was used as an alternative for the production of monoglycerides (MG) and diglycerides (DG). The reactions were conducted in a stainless-steel tubular reactor in the temperature range of 240–290 °C, on niobium phosphate (NBP) and niobium oxide (NBO) as catalysts. In the hydrolysis reactions at 270 °C, the maximum selectivities of the products of interest were obtained at 22 % MG and 48 % DG for the reaction with NBP, and 7 % MG and 33 % DG with NBO, for 59 % and 36 % of triglyceride conversion in 10 min, respectively. The proposed kinetic model presented a good fit of the theoretical model with the experimental data, showing that the previous hypotheses considered for the mechanism development are suitable for describing the kinetics of soybean oil hydrolysis.     

Tissue-Specific Ferritin- and GFP-Based Genetic Vectors Visualize Neurons by MRI in the Intact and Post-Ischemic Rat Brain

(1) Background: Neurogenesis is considered to be a potential brain repair mechanism and is enhanced in stroke. It is difficult to reconstruct the neurogenesis process only from the histological sections taken from different animals at different stages of brain damage and restoration. Study of neurogenesis would greatly benefit from development of tissue-specific visualization probes. (2) Purpose: The study aimed to explore if overexpression of ferritin, a nontoxic iron-binding protein, under a doublecortin promoter can be used for non-invasive visualization of neurogenesis using magnetic resonance imaging (MRI). (3) Methods: Ferritin heavy chain (FerrH) was expressed in the adeno-associated viral backbone (AAV) under the doublecortin promoter (pDCX), specific for young neurons, in the viral construct AAV-pDCX-FerrH. Expression of the enhanced green fluorescent protein (eGFP) was used as an expression control (AAV-pDCX-eGFP). The viral vectors or phosphate-buffered saline (PBS) were injected intracerebrally into 18 adult male Sprague–Dawley rats. Three days before injection, rats underwent transient middle-cerebral-artery occlusion or sham operation. Animals were subjected to In vivo MRI study before surgery and on days 7, 14, 21, and 28 days after injection using a Bruker BioSpec 11.7 T scanner. Brain sections obtained on day 28 after injection were immunostained for ferritin, young (DCX) and mature (NeuN) neurons, and activated microglia/macrophages (CD68). Additionally, RT-PCR was performed to confirm ferritin expression. (4) Results: T2* images in post-ischemic brains of animals injected with AAV-pDCX-FerrH showed two distinct zones of MRI signal hypointensity in the ipsilesioned hemisphere starting from 14 days after viral injection—in the ischemic lesion and near the lateral ventricle and subventricular zone (SVZ). In sham-operated animals, only one zone of hypointensity near the lateral ventricle and SVZ was revealed. Immunochemistry showed that ferritin-expressing cells in ischemic lesions were macrophages (88.1%), while ferritin-expressing cells near the lateral ventricle in animals both after ischemia and sham operation were mostly mature (55.7% and 61.8%, respectively) and young (30.6% and 7.1%, respectively) neurons. RT-PCR confirmed upregulated expression of ferritin in the caudoputamen and corpus callosum. Surprisingly, in animals injected with AAV-pDCX-eGFP we similarly observed two zones of hypointensity on T2* images. Cellular studies also showed the presence of mature (81.5%) and young neurons (6.1%) near the lateral ventricle in both postischemic and sham-operated animals, while macrophages in ischemic lesions were ferritin-positive (98.2%). (5) Conclusion: Ferritin overexpression induced by injection of AAV-pDCX-FerrH was detected by MRI using T2*-weighted images, which was confirmed by immunochemistry showing ferritin in young and mature neurons. Expression of eGFP also caused a comparable reduced MR signal intensity in T2*-weighted images. Additional studies are needed to investigate the potential and tissue-specific features of the use of eGFP and ferritin expression in MRI studies.     

Diversity of Biogas Plant Realizations

A techno‐economic analysis for four different types of biogas plant realizations was performed, including one biogas biorefinery concept. For each concept detail, a process flow diagram was created. Mass and energy balances were estimated. The net present value and payback were calculated for each concept for a better feasibility understanding. The results showed that with the used expensive substrate, namely, wheat straw, the obtained paybacks appeared to be more than 100 years. Sensitivity analysis was done for the price range of a substrate. Critical factors were defined to improve feasibility.     

Development of vibration damping materials based on butyl rubber: A study of the phase equilibrium,rheological, and dynamic properties of compositions

A detailed study of butyl rubber-based vibration damping formulations linking their composition, morphology, phase structure, viscosity, mechanical loss factor, and other characteristics is presented for the first time. High performance of the compositions including aromatic petroleum oil is explained by limited solubility of the plasticizer that leads to the formation of a highly-viscous emulsion (η_20°C ≈ 1000 Pa·s) consisting of a swollen butyl rubber matrix and dispersed oil droplets in the broad composition range. Chalk is found to be the best inorganic filler as its spherical particles provide strong adhesion to the reinforcing layer of aluminum foil. Aiming to eliminate ecologically unfriendly aromatic compounds, a new low-cost binding agent formulation based on butyl rubber mixed with polyisobutylene and highly refined mineral oil is suggested. Being environmentally safe, it possesses high viscosity of 1000–3000 Pa·s, cohesion strength of 3.5–5.0 N/cm, penetration of 4.5–6.0 mm, and mechanical loss factor up to 0.34 at room temperature, which are as good as, or even better than, the properties of currently produced vibration damping materials containing aromatic compounds. New materials can be used in car and aircraft parts for effective vibration isolation.     

Physical Understanding of Active Control of Beam Scanning in Preventing Top Concavity in Electron Beam Welding

Metallurgical and Materials Transactions A - Low-frequency scanning electron beam welding (SEBW) is recently recognized as a possible control method for preventing the top concavity behavior in...     

Intermolecular interaction of thermoresponsive poly-2-isopropyl-2-oxazoline in solutions and interpolymer complex with fiber-forming polyethylene oxide

The cross-linked poly-2-isopropyl-2-oxazolines (PiPrOx) differing in cross-linker content have been synthesized and characterized by light scattering, chromatography, and rheometry. The dramatic influence of the cross-linker content on solubility and uni- or bimodality was observed. For the first time, the interpolymer complex of cross-linked PiPrOx with polyethylene oxide is manufactured in fibrous form by the electrospinning method. The role of intermolecular hydrogen bonds in the structure and properties of electrospun fibers (EF) was studied by infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. It was established that these interactions allow to obtain a uniform fibrous membrane. At the same time, hydrogen bonding is responsible for the self-organization of PiPrOx in water.