Prediction of Oxygen and Ozone Solubility in Liquids with the Peng-Robinson Equation of State

The results of predictions of ozone solubility in the inert organic solvents based on the Peng-Robinson EOS have been reported. A hypothesis that there is a possible similarity of the values of the binary coefficients, k₁₂, between oxygen and ozone has been tested. Some attempts to estimate ozone solubility in perfluorocarbons have been discussed.     

Characteristics and Cryopreservation of Semen of Sex-Reversed Females of Salmonid Fish

Sex reversal has been used as a breeding strategy by salmonid fish to produce genetically and phenotypically single sex populations. Production of all-female fish has great importance for the creation of monosex female triploids of salmonid fish, which are valued for their sterility, lack of female maturation, and larger commercial size. Among salmonids, the majority of rainbow trout (Oncorhynchus mykiss) production is based on all-female production with a high proportion of all-female triploid production in Europe. The main aim of this review is to present the recent knowledge regarding sex-reversed females (SRFs) of salmonid fish. We discuss the methods of sex reversal as well as their effects on the morphology and histology of the reproductive tract. We focus on the characteristics of SRF semen as well as the factors determining semen quality. The lower quality of SRF sperm compared to that of normal males has resulted in the need for the artificial maturation of semen. Most importantly, methods of semen storage—both short-term and long-term (cryopreservation)—that can improve hatchery operations are presented with the special emphasis on recent progress in development of efficient cryopreservation procedures and use of cryopreserved semen in hatchery practice. Moreover, we also address the emerging knowledge concerning the proteomic investigations of salmonid sperm, focusing primarily on the proteomic comparison of normal male and SRF testicular semen and presenting changes in SRF rainbow trout sperm proteome after in vitro incubation in artificial seminal plasma.     

The Role of CTLA4 and Its Polymorphisms in Solid Organ and Haematopoietic Stem Cell Transplantation

HLA matching, transplantation technique, or underlying disease greatly influences the probability of long-term transplantation success. It has been hypothesised that genetic variation affecting antigen presentation also contributes to the outcomes of both solid organ transplantation and allogeneic haematopoietic stem cell transplantation (AHSCT). Those genes, along with those responsible for innate and adaptive immunity, have become targets of investigation. In this review, we focus on the role of CTLA4 in the process of acute graft rejection and summarise the progress in our understanding of its role in predicting the outcome. We present the results of the latest studies investigating the link between CTLA4 gene variability and AHSCT, as well as organ transplantation outcomes. While some studies found a link between +49 A/G and −318 C/T and transplantation outcomes, comprehensive meta-analyses have failed to present any association. The most recent field reviews suggest that the −1772 T/C (rs733618) CC genotype is weakly associated with a lower risk of acute graft rejection, while +49 A/G might be clinically meaningful when investigated in the context of combinations with other polymorphisms. Studies verifying associations between 12 CTLA4 gene SNPs and AHSCT outcomes present inexplicit results. Some of the most commonly studied polymorphisms in this context include +49 A/G (rs231775) and CT60 A/G (rs3087243). The results signify that, in order to understand the role of CTLA4 and its gene polymorphisms in transplantology, further studies must be conducted.     

Myopathy-Sensitive G-Actin Segment 227-235 Is Involved in Salt-Induced Stabilization of Contacts within the Actin Filament

Formation of stable actin filaments, critically important for actin functions, is determined by the ionic strength of the solution. However, not much is known about the elements of the actin fold involved in ionic-strength-dependent filament stabilization. In this work, F-actin was destabilized by Cu²⁺ binding to Cys374, and the effects of solvent conditions on the dynamic properties of F-actin were correlated with the involvement of Segment 227-235 in filament stabilization. The results of our work show that the presence of Mg²⁺ at the high-affinity cation binding site of Cu-modified actin polymerized with MgCl₂ strongly enhances the rate of filament subunit exchange and promotes the filament instability. In the presence of 0.1 M KCl, the filament subunit exchange was 2–3-fold lower than that in the MgCl₂-polymerized F-actin. This effect correlates with the reduced accessibility of the D-loop and Segment 227-235 on opposite filament strands, consistent with an ionic-strength-dependent conformational change that modulates involvement of Segment 227-235 in stabilization of the intermonomer interface. KCl may restrict the mobility of the α-helix encompassing part of Segment 227-235 and/or be bound to Asp236 at the boundary of Segment 227-235. These results provide experimental evidence for the involvement of Segment 227-235 in salt-induced stabilization of contacts within the actin filament and suggest that they can be weakened by mutations characteristic of actin-associated myopathies.     

Vitamin D Compounds PRI-2191 and PRI-2205 Enhance Anastrozole Activity in Human Breast Cancer Models

1,25-Dihydroxycholecalciferol, the hormonally active vitamin D₃ metabolite, is known to exhibit therapeutic effects against breast cancer, mainly by lowering the expression of estrogen receptors and aromatase activity. Previously, the safety of the vitamin D active metabolite (24R)-1,24-dihydroxycholecalciferol (PRI-2191) and 1,25(OH)₂D₃ analog PRI-2205 was tested, and the in vitro activity of these analogs against different cancer cell lines was studied. We determined the effect of the two vitamin D compounds on anastrozole (An) activity against breast cancer based on antiproliferative activity, ELISA, flow cytometry, enzyme inhibition potency, PCR, and xenograft study. Both the vitamin D active metabolite and synthetic analog regulated the growth of not only estrogen receptor-positive cells (T47D and MCF-7, in vitro and in vivo), but also hormone-independent cancer cells such as SKBR-3 (HER-2-positive) and MDA-MB-231 (triple-negative), despite their relatively low VDR expression. Combined with An, PRI-2191 and PRI-2205 significantly inhibited the tumor growth of MCF-7 cells. Potentiation of the antitumor activity in combined treatment of MCF-7 tumor-bearing mice is related to the reduced activity of aromatase by both An (enzyme inhibition) and vitamin D compounds (switched off/decreased aromatase gene expression, decreased expression of other genes related to estrogen signaling) and by regulation of the expression of the estrogen receptor ERα and VDR.     

Tribological Properties of the Oxide Coatings Produced onto 6061-T6 Aluminum Alloy in the Hard Anodizing Process

The aim of this work was to establish the influence of the thickness of the anodic coatings on their mechanical properties and to understand the relation between their hardness and the abrasion resistance. The coatings were produced in the hard anodizing process onto the 6061-T6 aluminum alloy. Their thickness was in the range between 19 and 43 µm. The abrasion resistance was determined by using Taber abrasion test. The weight losses of the coatings obtained were in the range between 15 and 11 mg and decreased with their increasing thickness. It has been shown that the hardness measured on the cross sections of the coatings did not correspond to their abrasion resistance. Thus, the new approach has been proposed. The hardness of the coatings was estimated on the basis of the results of the scratch test performed at the constant load. The results obtained correspond to the abrasion resistance of the coatings.     

Testing of thin-walled steel joints fabricated by spot welding and plug welding

Selected methods of joining which can be used for manufacturing and repairing of car bodies by means of welding are presented in this article. Three kinds of 1 mm-thick steel sheets were used in the tests: deep drawing steel (DC04) and two-phase steels of increased high strength (DP600 and DP800). The comparative connections were carried out by means of resistance spot welding and with plug joints made by means of the MAG method and through braze welding. Comparative assessment of the strength and geometrical parameters of the test joints was then conducted.     

Formulation and technology research of new silver solder with flux covering

In their eutectic compositions, Au–Si alloys have a melting point of 369°C, and a colour similar to that of high-grade gold. Results of the manufacture of gold alloys with 2.5%, 2.8% and 3.0% silicon, by means of melting in a plasma furnace with an inert argon atmosphere, are presented in this study. Chemical composition characterisation was carried out by energy dispersion spectroscopy and wave dispersion spectrometry, and metallographic and microstructural analysis by optical microscopy, SEM and DRX, Vickers hardness and mircohardness testing, melting point evaluation by DSC and determination of the SCIELab colorimetric coordinates. The results of the hardness and micro-hardness testing gave values around 110HV, presenting an important increase in the mechanical properties with respect to the traditional high purity gold alloys. The melting temperature for the alloys was around 374°C as well as being a heat very close to the values of pure gold.