Principles of adjustable autonomy: a framework for resilient human–machine cooperation

Unmanned ground vehicles tend to be more and more autonomous, but both complete teleoperation and full autonomy are not efficient enough to deal with all possible situations. To be efficient, the human–robot system must be able to anticipate, react and recover from errors of different kinds, i.e., to be resilient. From this observation, this paper proposes a survey on the resilience of a human–machine system and the means to control the resilience. The resilience of a system can be defined as the ability to maintain or recover a stable state when subject to disturbance. Adjustable autonomy and human–machine cooperation are considered as means of resilience for the system. This paper then proposes three indicators to assess different meanings of resilience of the system: foresight and avoidance of events, reaction to events and recovery from occurrence of events. The third of these metrics takes into consideration the concept of affordances that allows a common representation for the opportunities of action between the automated system and its environment.     

Bond graph based control of a three-phase inverter with LC filter – Connection to passive and active loads

This paper proposes a model of a three phase electrical inverter with a LC output filter in delta connection used in a renewable energy supply system. The concept of inverse bond graph via bicausality is used for the control law design. The control law robustness is tested by connecting passive and active (induction machine) loads.     

Improved Interface Conditions for 2<Emphasis Type="Italic">D</Emphasis> Domain Decomposition with Corners: Numerical Applications

This article deals with a local improvement of domain decomposition methods for 2-dimensional elliptic problems for which either the geometry or the domain decomposition presents conical singularities. After explaining the main results of the theoretical analysis carried out in Chniti et al. (Calcolo 45, 2008), the numerical experiments presented in this article confirm the optimality properties of the new interface conditions.     

A Fast Approximation of the Bilateral Filter Using a Signal Processing Approach

The bilateral filter is a nonlinear filter that smoothes a signal while preserving strong edges. It has demonstrated great effectiveness for a variety of problems in computer vision and computer graphics, and fast versions have been proposed. Unfortunately, little is known about the accuracy of such accelerations. In this paper, we propose a new signal-processing analysis of the bilateral filter which complements the recent studies that analyzed it as a PDE or as a robust statistical estimator. The key to our analysis is to express the filter in a higher-dimensional space where the signal intensity is added to the original domain dimensions. Importantly, this signal-processing perspective allows us to develop a novel bilateral filtering acceleration using downsampling in space and intensity. This affords a principled expression of accuracy in terms of bandwidth and sampling. The bilateral filter can be expressed as linear convolutions in this augmented space followed by two simple nonlinearities. This allows us to derive criteria for downsampling the key operations and achieving important acceleration of the bilateral filter. We show that, for the same running time, our method is more accurate than previous acceleration techniques. Typically, we are able to process a 2 megapixel image using our acceleration technique in less than a second, and have the result be visually similar to the exact computation that takes several tens of minutes. The acceleration is most effective with large spatial kernels. Furthermore, this approach extends naturally to color images and cross bilateral filtering.     

Three-dimensional facial surface modeling applied to recognition

Applications related to game technology, law-enforcement, security, medicine or biometrics are becoming increasingly important, which, combined with the proliferation of three-dimensional (3D) scanning hardware, have made that 3D face recognition is now becoming a promising and feasible alternative to two-dimensional (2D) face methods. The main advantage of 3D data, when compared with traditional 2D approaches, is that it provides information that is invariant to rigid geometric transformations and to pose and illumination conditions. One key element for any 3D face recognition system is the modeling of the available scanned data. This paper presents new 3D models for facial surface representation and evaluates them using two matching approaches: one based on support vector machines and another one on principal component analysis (with a Euclidean classifier). Also, two types of environments were tested in order to check the robustness of the proposed models: a controlled environment with respect to facial conditions (i.e. expressions, face rotations, etc.) and a non-controlled one (presenting face rotations and pronounced facial expressions). The recognition rates obtained using reduced spatial resolution representations (a 77.86% for non-controlled environments and a 90.16% for controlled environments, respectively) show that the proposed models can be effectively used for practical face recognition applications.     

Development of active matrix LCD for use in high‐resolution adaptive headlights

Conventional adaptive driving beam headlamps are limited in achieving still higher quantities of switchable pixels by the number of LEDs and movable elements needed. In this paper, it is shown that by integrating an active matrix liquid crystal display module, it is possible to realize fully adaptive high‐resolution headlights without mechanical elements and a finite number of LED with 30 k switchable pixels.     

Road‐Centered Map‐Aided Localization for Driverless Cars Using Single‐Frequency GNSS Receivers

Accurate localization with high availability is a key requirement for autonomous vehicles. It remains a major challenge when using automotive sensors such as single‐frequency Global Navigation Satellite System (GNSS) receivers, a lane detection camera, and proprioceptive sensors. This paper describes a method that enables the estimation of stand‐alone single‐frequency GNSS errors by integrating the measurements from a forward‐looking camera matched with lane markings stored in a digital map. It includes a parameter identification method for a shaping model, which is evaluated using experimental data. An algebraic observability study is then conducted to prove that the proposed state vector is fully observable in a road‐oriented frame. This observability property is the basis to develop a road‐centered Extended Kalman filter (EKF) that can maintain the observability of every component of the state vector on any road, whatever its orientation. To accomplish this, the filter needs to handle road changes, which it does using bijective transformations. The filter was implemented and tested intensely on an experimental vehicle for driverless valet parking services. Field results have shown that the performance of the estimation process is better than solutions based on EKF implemented in a fixed working frame. The proposed filter guarantees that the drift along the road direction remains bounded. This is very important when the vehicle navigates autonomously. Furthermore, the road‐centered modeling improves the accuracy, consistency, and robustness of the localization solver.     

Simultaneous automated design of structured QFT controller and prefilter using nonlinear programming

This paper describes a nonlinear programming‐based robust design methodology for controllers and prefilters of a predefined structure for the linear time‐invariant systems involved in the quantitative feedback theory. This controller and prefilter synthesis problem is formulated as a single optimization problem with a given performance optimization objective and constraints enforcing stability and various specifications usually enforced in the quantitative feedback theory. The focus is set on providing constraints expression that can be used in standard nonlinear programming solvers. The nonlinear solver then computes in a single‐step controller and prefilter design parameters that satisfy the prescribed constraints and maximizes the performance optimization objective. The effectiveness of the proposed approach is demonstrated through a variety of difficult design cases like resonant plants, open‐loop unstable plants, and plants with variation in the time delay. Copyright © 2016 John Wiley & Sons, Ltd.