Through‐the‐glass spectroscopic ellipsometry for analysis of CdTe thin‐film solar cells in the superstrate configuration

Polycrystalline CdS/CdTe thin‐film solar cells in the superstrate configuration have been studied by spectroscopic ellipsometry (SE) using glass side illumination. In this measurement method, the first reflection from the ambient/glass interface is rejected, whereas the second reflection from the glass/film‐stack interface is collected; higher order reflections are also rejected. The SE analysis incorporates parameterized dielectric functions ε for solar cell component materials obtained by in situ and variable‐angle SE. In the SE analysis of the complete cells, a step‐wise procedure ranks the fitting parameters, including thicknesses and those defining the spectra in ε, according to their ability to reduce the root‐mean‐square deviation between the simulated and measured SE spectra. The best fit thicknesses from this analysis are found to be consistent with electron microscopy. Based on the SE results, the solar cell quantum efficiency (QE) can be simulated without any free parameters, and comparisons with measured QE enable optical model refinements as well as identification of optical and electronic losses. These capabilities have wide applications in photovoltaic module mapping and in‐line monitoring. Copyright © 2016 John Wiley & Sons, Ltd.     

Size-Scaling of Tensile Failure Stress in a Hot-Pressed Silicon Carbide

Quasi-static Weibull strength-size scaling of hot-pressed silicon carbide is described. Two surface conditions (uniaxial ground and uniaxial ground followed by grit blasting) were explored. Strength test coupons sampled effective areas from the very small (4 × 10⁻³ mm²) to the very large (4 × 10⁴ mm²). Equibiaxial flexure and Hertzian ring crack initiation were used for the strength tests, and characteristic strengths for several different specimen geometries were analyzed as a function of effective area. Characteristic strength was found to substantially increase with decreased effective area for both surface conditions. Weibull moduli of 9.4- and 11.7 well-represented strength-size scaling for the two ground conditions between an effective area range of 10⁻¹ and 4 × 10⁴ mm². Machining damage was observed to be the dominant flaw type over this range. However, for effective areas <10⁻¹ mm², the characteristic strength increased rapidly for both ground surface conditions as the effective area decreased, and one or more of the inherent assumptions behind the classical Weibull strength-size scaling were in violation in this range. The selections of a ceramic strength to account for ballistically induced tile deflection and expanding cavity modeling are considered in context with the measured strength-size scaling. The observed size-scaling is briefly discussed with reference to dynamic strength.     

Current status and opportunities in chalcopyrite solar cells

The chalcopyrite semiconductors, and most commonly Cu(In,Ga)Se₂, are the active layers in the highest-efficiency thin film photovoltaics, both in small cells and modules. The modules show excellent stability and can be produced by a wide range of techniques. The manufacturing community is scaling up their facilities with the potential to produce large areas at competitive costs in the near future. The devices can be produced without toxic constituents and by non-vacuum processes. Ultimately the materials could yield very high efficiency multijunction devices in thin film one-sun modules with levellized costs of energy competitive with any current technology.     

Manufacture and use of pulverized flexible polyester polyurethane foam particles

Crucial process modifications were shown necessary to improve the economics of cryogenic grinding of flexible polyurethane (PU) foam. It is concluded that foam densification prior to cryogenic processing was essential to reduce insulation effects. In comparative studies of foam and densified foam, increasing the density to ～800 kg/m³ resulted in dramatically reduced cryogen use and vastly improved output. Results indicated that cryogenic pulverization presents a significantly more economic solution than previously recognized. Particles produced by this method were added to foam formulations and effects of particle size and structure on compression properties and cell structure of resultant foams were studied. Particle sizes <100 μm gave similar compression properties and cell size to virgin foam at up to 10 parts by weight on 100 parts of polyol, but cell structure and compressive properties showed increasing divergence as particle size and addition concentration increased. Studies of alternative uses showed that the PU particles showed promise as fillers in rigid PU foam formulations and suggested an extending or reinforcing action in natural rubber vulcanizates.     

High-precision 40Ar/39Ar geochronology and the advent of North America's Late Cretaceous terrestrial fauna

A densely sampled, diverse new fauna from the uppermost Cedar Mountain Formation, Utah, indicates that the basic pattern of faunal composition for the Late Cretaceous of North America was already established by the Albian-Cenomanian boundary. Multiple, concordant 40Ar/39Ar determinations from a volcanic ash associated with the fauna have an average age of 98.39 +/- 0.07 million years. The fauna of the Cedar Mountain Formation records the first global appearance of hadrosaurid dinosaurs, advanced lizard (e.g., Helodermatidae), and mammal (e.g., Marsupialia) groups, and the first North American appearance of other taxa such as tyrannosaurids, pachycephalosaurs, and snakes. Although the origin of many groups is unclear, combined biostratigraphic and phylogenetic evidence suggests an Old World, specifically Asian, origin for some of the taxa, an hypothesis that is consistent with existing evidence from tectonics and marine invertebrates. Large-bodied herbivores are mainly represented by low-level browsers, ornithopod dinosaurs, whose radiations have been hypothesized to be related to the initial diversification of angiosperm plants. Diversity at the largest body sizes (>10(6) g) is low, in contrast to both preceding and succeeding faunas; sauropods, which underwent demise in the Northern hemisphere coincident with the radiation of angiosperms, apparently went temporarily unreplaced by other megaherbivores. Morphologic and taxonomic diversity among small, omnivorous mammals, multituberculates, is also low. A later apparent increase in diversity occurred during the Campanian, coincident with the appearance of major fruit types among angiosperms, suggesting the possibility of adaptive response to new resources.     

Erythema migrans-like rash illness at a camp in North Carolina: a new tick-borne disease?

BACKGROUND: Borrelia burgdorferi, the causative agent of Lyme disease, has never been isolated from a patient thought to have acquired Lyme disease in any southeastern state. OBJECTIVE: To investigate 14 cases of an erythema migrans (EM)-like rash illness that occurred during 2 summers at an outdoor camp in central North Carolina in an effort to determine the etiologic, epidemiological, and clinical aspects of this illness. METHODS: Using active surveillance, we identified cases of clinically diagnosed EM in residents and staff of the camp. We collected clinical and demographic information; history of exposure to ticks; acute and convalescent serum antibodies to B. burgdorferi, Rickettsia rickettsii, and Ehrlichia chaffeensis; and cultures for spirochetes from biopsy specimens of skin lesions. Serum samples from a group of residents and staff who did not develop rashes were tested for the same antibodies. We speciated ticks removed from people and collected from vegetation. RESULTS: We identified 14 cases of EM-like rash illness during the 2 summers. Of the 14 case-patients, 10 had associated mild systemic symptoms and 1 had documented fever. All 14 case-patients had removed attached ticks, and 8 remembered having removed a tick from the site where the rash developed a median of 12 days earlier (range, 2-21 days). One tick removed from the site where a rash later developed was identified as Amblyomma americanum, the Lone Star tick; 97% of ticks collected from vegetation and 95% of ticks removed from people were A. americanum. No spirochetes were isolated from skin biopsy specimens. Paired serum samples from 13 case-patients did not show diagnostic antibody responses to B. burgdorferi or other tick-borne pathogens. CONCLUSIONS: This investigation suggests the existence of a new tick-associated rash illness. We suspect that the disease agent is carried by A. americanum ticks. In the southern United States, EM-like rash illness should no longer be considered definitive evidence of early Lyme disease.     

Enhanced dielectric and piezoelectric properties of low-temperature processed Pb(Zr,Ti)O3 thick films prepared by hybrid deposition technique with chemical solution infiltration process

High quality PZT thick films over 10 μm were successfully prepared using a chemical solution infiltration into the porous screen-printed PZT thick films. The hybrid films prepared with solution infiltration process showed very dense and uniform microstructure with large grain size at a low annealing temperature such as 700 °C. The hybrid films showed markedly enhanced electrical properties. The measured dielectric constant, the remanent polarization and the piezoelectric d₃₃ coefficient of the films were 1900, 27 μC/cm², and 230 pC/N, respectively, which were over two times higher than those of the screen printed films without the solution infiltration process.