Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.     

Investigation of PSt-MWCNT concentration on epoxyacrylate photopolymerization and conductivity of polymer films

Photopolymerization kinetics and conductivity changes of epoxyacrylate composites for various loading modified PSt-MWCNT weight fractions changing from 0.0025 to 0.2 wt.% were evaluated by performing photo differential scanning calorimetry (photo-DSC) and four point conductivity measurements. 0.2% PSt-MWCNT additive polymeric films had their electrical conductivity boosted by 6% more than non-additive polymeric films.     

Effects of Added Phosphates on Lipid Stability During Salt Curing and Rehydration of Cod (Gadus morhua)

Effects of added phosphates on retardation of lipid oxidation of salted cod during processing, storage and after rehydration were investigated. Lipid hydrolysis progress and development of color, primary and secondary lipid oxidation products and fluorescence intensities were determined. Added phosphates significantly retarded lipid hydrolysis and lipid oxidation progress, resulting in lower free fatty acid , lipid hydroperoxides (PV), thiobarbituric acid-reactive substances (TBARS) as well as fluorescence intensities (δF _or and δF _aq). Significant correlation between the lipid oxidation products (PV, TBARS, δF _or and δF _aq) and yellow/brownish discoloration (b* value) of salted cod was observed. Principal component analysis showed that TBARS, b* value and δF _or were the strongest indicators of lipid oxidation during salting and storage.     

Effect of Silica Surface Dopants on the Formation of Alumina/Aluminum Composites by the Directed Metal Oxidation of an Aluminum Alloy

This study focused on clarifying the effect of SiO₂ surface dopants on the formation of Al₂O₃/aluminum composites, especially on oxidation phenomena during the incubation period. The present results showed that a surface dopant decreased the incubation period of an Al-Mg-Si alloy, as well as that of an Al-Mg alloy, and that addition of an external surface dopant decreased the incubation period more effectively than did an internal alloying of silicon. A two-step oxidation process was also conducted. In the first step of the process, an aluminum alloy was oxidized without a surface dopant and cooled to room temperature during the incubation stage. In the second step, the same specimen was surface-doped with SiO₂ powder and reoxidized. The incubation time for the specimen subjected to the two-step oxidation process was the same as that for the single-step specimen oxidized with a surface dopant. The substantial decrease in the incubation period, especially for the Al-Mg alloy, is ascribed to interaction between the SiO₂ surface dopant and the MgO layer. This interaction made the MgO layer thinner and increased the number of magnesium vacancies in the MgO layer, thus providing an appropriate microstructure in the MgO layer for bulk-growth initiation.     

Seismic behavior of a buried gas pipeline under earthquake excitations

Earthquake time-history analyses have been performed for a buried gas pipeline of API 5L Grade X65, which is popularly used in Korea. For this purpose, various parameters such as the type of buried gas pipeline, end-restraint conditions, soil characteristics, single and multiple earthquake input ground motions, and burial depths are selected. A comparative study has been performed to obtain the response characteristics of strains in a buried pipeline section, axial relative displacement, and transverse relative displacement. The capacity evaluation of the pipeline with respect to the response characteristics has been performed in comparison with the allowable strain and displacement capacity in axial and transverse directions, as suggested by the Guidelines for the Seismic Design of Buried Gas Pipelines, KOGAS. The present study is expected to provide useful information for an effective seismic evaluation of a buried gas pipeline.     

Are disulphide bonds formed during acid gelation of preheated milk?

The role of thiol/disulphide exchanges during acid gelation of preheated milk was studied with milk samples with or without N‐ethylmaleimide (NEM), a thiol‐blocking agent, and acidified to pH 4 by the addition of glucono‐delta‐lactone at 20 °C. Active or total thiol groups, particle size with light scattering measurements in a dissociating solvent or by SDS‐agarose electrophoresis were determined on acidified milk samples. Diffusing wave spectroscopy and rheology in low strain were applied during acidification of sample, while rheology in large strain was applied on final acid gels. The only effect of the presence of NEM was a reduced firmness of acid gels as measured at large strain and a reduced tendency to form large aggregates at pH<5.5. In conclusions, thiol/disulphide exchanges during acidification of milk played only a minor role in the building of acid gel networks from heated milk.     

Numerical simulation of an arbitrarily ended asymmetrical slab waveguide by guided-mode extracted integral equations

The scattering phenomenon from an arbitrary-shaped end of a asymmetrical slab waveguide for the cases of TE and TM guided modes is simulated by means of boundary integral equations that are called guided-mode extracted integral equations. The integral equations that we derive can be solved by the conventional boundary-element method. Numerical results are presented for problems of three-layer asymmetrical waveguides with tilted ends. The reflection coefficient, reflected and scattered powers, and radiation patterns are calculated numerically for the cases of incident TE and TM guided modes.     

Building blocks for a two-frequency laser lidar-radar: a preliminary study

A new principle of lidar-radar is theoretically and experimentally investigated. The proposed architecture is based on the use of an rf modulation of the emitted light beam and a direct detection of the backscattered intensity. Use of a radar-processing chain allows one to obtain range and Doppler measurements with the advantages of lidar spatial resolution. We calculate the maximum range of this device, taking into account different possible improvements. In particular, we show that use of a pulsed two-frequency laser and a spatially multimode optical preamplification of the backscattered light leads to calculated ranges larger than 20 km, including the possibility of both range and Doppler measurements. The building blocks of this lidar-radar are tested experimentally: The radar processing of an rf-modulated backscattered cw laser beam is demonstrated at 532 nm, illustrating the Doppler and identification capabilities of the system. In addition, signal-to-noise ratio improvement by optical pre-amplification is demonstrated at 1.06 microm. Finally, a two-frequency passively Q-switched Nd:YAG laser is developed. This laser then permits two-frequency pulses with tunable pulse duration (from 18 to 240 ns) and beat frequency (from 0 to 2.65 GHz) to be obtained.