Effect of tumbling and RN genotype on sensory perception of cured-smoked pork loin

Effects of tumbling and RN genotype on sensory perception of cured-smoked loins were studied on loins from 32 crossbred female pigs containing Hampshire blood. Right-side loins were intermittently tumbled during 4 h, whereas left-side loins were left non-tumbled. Tumbled loins were more tender and uniform in cured colour as well as less acidulous in taste compared with non-tumbled loins. Further, the formation of undesirable pores was lower in tumbled loins. Final juiciness tended to be higher and meat taste intensity lower in tumbled loins, whereas initial juiciness did not differ. There were no significant interactions between tumbling and RN genotype for sensory attributes. RN⁻ carriers (RN⁻/rn⁺) were more acidulous in taste, had more pronounced meat taste and were saltier than non-carriers (rn⁺ /rn⁺). Moreover, they tended to have higher initial juiciness and more undesirable pores, and be less homogeneous in cured pink colour. No differences in consumer preference between the four treatments were detected in the ranking test, but most persons ranked non-tumbled loins highest regarding overall liking. Instrumental tenderness measurements agreed well with sensory tenderness scores.     

Indoor air quality and the associated health risk in primary school buildings in Central Europe – The InAirQ study

The indoor air quality (IAQ) was investigated in sixty-four primary school buildings in five Central European countries (Czech Republic, Hungary, Italy, Poland, and Slovenia). The concentration of volatile organic compounds, aldehydes, PM_2.5 mass, carbon dioxide, radon, as well as physical parameters were investigated during the heating period of 2017/2018. Significant differences were identified for the majority of the investigated IAQ parameters across the countries. The median indoor/outdoor ratios varied considerably. A comprehensive evaluation of IAQ in terms of potential health effects and comfort perception was performed. Hazard quotient values were below the threshold value of 1 with one exception. In contrast, 31% of the school buildings were characterized by hazard index values higher than 1. The maximum cumulative ratio approach highlighted that the concern for non-carcinogenic health effects was either low or the health risk was driven by more substances. The median excess lifetime cancer risk values exceeded the acceptable value of 1 × 10⁻⁶ in the case of radon and formaldehyde. PM_2.5 mass concentration values exceeded the 24 h and annual guideline values set by the World Health Organization in 56 and 85% of the cases, respectively. About 80% of the schools could not manage to comply with the recommended concentration value for carbon dioxide (1000 ppm).     

THz Detection of Biomolecules in Aqueous Environments—Status and Perspectives for Analysis Under Physiological Conditions and Clinical use

Bioanalytical THz sensing techniques have proven to be an interesting and viable tool for the label-free detection and analysis of biomolecules. However, a major challenge for THz bioanalytics is to perform investigations in the native aqueous environments of the analytes. This review recapitulates the status and future requirements for establishing THz biosensing as a complementary toolbox in the repertoire of standard bioanalytic methods. The potential use in medical research and clinical diagnosis is discussed. Under these considerations, this article presents a comprehensive categorization of biochemically relevant analytes that have been investigated by THz sensing techniques in aqueous media. The detectable concentration levels of ions, carbohydrates, (poly-)nucleotides, active agents, proteins and different biomacromolecules from THz experiments are compared to characteristic physiological concentrations and lower detection limits of state-of-the-art bioanalytical methods. Finally, recent experimental developments and achievements are discussed, which potentially pave the way for THz analysis of biomolecules under clinically relevant conditions.

     

Optical Properties of Metacrystals Based on Protein Nanocages

The optical properties of 3D metacrystals made of gold nanoparticles in protein nanocages are studied. These metacrystals have sizes of tens of micrometers and are of high structural and optical quality. Through microspectroscopy measurements and model calculations it is demonstrated that the metacrystals show plasmonic absorption in the green wavelength range and are largely transparent in the red and infrared ranges. By using empty nanocages as placeholders in the metacrystal lattice, it is possible to control how strongly the metamaterial absorbs. Measurements on a pyramidal metacrystal show that it deflects visible light. The deflection shows evidence for anomalous refraction at short wavelengths and normal refraction at long wavelengths. The refractive dispersion is ascribed to the optical dispersion relation of the plasmonic metamaterial.     

Occurrence of perfluoroalkyl compounds in surface waters from the North Pacific to the Arctic Ocean

Perfluoroalkyl compounds (PFCs) were determined in 22 surface water samples (39-76°N) and three sea ice core and snow samples (77-87°N) collected from North Pacific to the Arctic Ocean during the fourth Chinese Arctic Expedition in 2010. Geographically, the average concentration of ∑PFC in surface water samples were 560 ± 170 pg L(-1) for the Northwest Pacific Ocean, 500 ± 170 pg L(-1) for the Arctic Ocean, and 340 ± 130 pg L(-1) for the Bering Sea, respectively. The perfluoroalkyl carboxylates (PFCAs) were the dominant PFC class in the water samples, however, the spatial pattern of PFCs varied. The C(5), C(7) and C(8) PFCAs (i.e., perfluoropentanoate (PFPA), perfluoroheptanoate (PFHpA), and perfluorooctanoate (PFOA)) were the dominant PFCs in the Northwest Pacific Ocean while in the Bering Sea the PFPA dominated. The changing in the pattern and concentrations in Pacific Ocean indicate that the PFCs in surface water were influenced by sources from the East-Asian (such as Japan and China) and North American coast, and dilution effect during their transport to the Arctic. The presence of PFCs in the snow and ice core samples indicates an atmospheric deposition of PFCs in the Arctic. The elevated PFC concentration in the Arctic Ocean shows that the ice melting had an impact on the PFC levels and distribution. In addition, the C(4) and C(5) PFCAs (i.e., perfluorobutanoate (PFBA), PFPA) became the dominant PFCs in the Arctic Ocean indicating that PFBA is a marker for sea ice melting as the source of exposure.     

The Adaptive Solar Facade: From concept to prototypes

The Adaptive Solar Facade (ASF) is a modular, highly integrated dynamic building facade.The energetic behavior as well as the architectural expression of the facade can be controlled with high spatio-temporal resolution through individually addressable modules. We present the general design process, the current mechanical design, and simulation results on photovoltaic power production and building energy consumption. We introduce the controller concept and show results on solar tracking as well as user interaction. Lastly, we present our current and planned prototypes.     

Six-layer lamination of a new dry film negative-tone photoresist for fabricating complex 3D microfluidic devices

We present a new epoxy-based negative-tone dry film photoresist (DFR) for fabricating multilayer microfluidic devices using a lamination process combined with a standard photolithography technology. As proof-of-concept, a complex 3D-hydrodynamic focusing device was produced via a six-layer lamination process of 33 µm-thick DFR layers. The bonding strength of the new DFR was tested on silicon, glass, and titanium substrates, respectively. A maximum bonding strength of 37 MPa was obtained for the dry film photoresist laminated on glass. No leakage was found, and burst tests proved excellent robustness and sealing reliability of the microchannels.     

From Single Molecules to Thin Film Electronics,Nanofibers, e‐Textiles and Power Cables: Bridging Length Scales with Organic Semiconductors

Organic semiconductors are the centerpiece of several vibrant research fields from single‐molecule to organic electronics, and they are finding increasing use in bioelectronics and even classical polymer technology. The versatile chemistry and broad range of electronic functionalities of conjugated materials enable the bridging of length scales 15 orders of magnitude apart, ranging from a single nanometer (10^?9 m) to the size of continents (10⁶ m). This work provides a taste of the diverse applications that can be realized with organic semiconductors. The reader will embark on a journey from single molecular junctions to thin film organic electronics, supramolecular assemblies, biomaterials such as amyloid fibrils and nanofibrillated cellulose, conducting fibers and yarns for e‐textiles, and finally to power cables that shuffle power across thousands of kilometers.     

Real-time nucleic acid sequence-based amplification in nanoliter volumes

Real-time nucleic acid sequence-based amplification (NASBA) is an isothermal method specifically designed for amplification of RNA. Fluorescent molecular beacon probes enable real-time monitoring of the amplification process. Successful identification, utilizing the real-time NASBA technology, was performed on a microchip with oligonucleotides at a concentration of 1.0 and 0.1 microM, in 10- and 50-nL reaction chambers, respectively. The microchip was developed in a silicon-glass structure. An instrument providing thermal control and an optical detection system was built for amplification readout. Experimental results demonstrate distinct amplification processes. Miniaturized real-time NASBA in microchips makes high-throughput diagnostics of bacteria, viruses, and cancer markers possible, at reduced cost and without contamination.