Crystallization and magnetic property of iron oxide nanoparticles precipitated in silica glass matrix

Crystallization and magnetic property of Fe₂O₃ nanoparticle precipitated in SiO₂ matrix was investigated. Fe₂O₃/SiO₂ nanocomposite thin film was obtained by annealing of the amorphous Fe-Si-O thin film deposited by RF-magnetron sputtering of (α-Fe₂O₃)_1−x/(SiO₂)_x composite targets. The Fe₂O₃ crystallite size increased with decreasing SiO₂ area ratio, x of the target and increasing annealing temperature. ?-Fe₂O₃ with the crystallite size of 20-30 nm was obtained after annealing the film deposited in SiO₂ area ratio, x = 0.33-0.42 at 900 °C. Lower SiO₂ area ratio (x) than 0.25 and higher annealing temperature resulted in precipitation of α-Fe₂O₃ with the larger crystallite size than 40 nm. In the case of SiO₂ area ratio, x ≥ 0.50, the annealed film was amorphous and showed higher magnetization and smaller coercivity due to the precipitation of very small crystalline γ-Fe₂O₃. The ?-Fe₂O₃/SiO₂ composite thin film showed ferromagnetic hysteresis with coercive force of 0.14 T.     

Wide Color Variation in SiNO Thin Films Dispersed with Precipitated TiN Nano Particles

Amorphous thin films of Ti_1?ySi_y(N,O) with y ≥ 0.38 were prepared by reactive sputter deposition in a nitrogen atmosphere. Thermal annealing of the films in an ammonia flow above 800°C yielded Si(N,O) amorphous thin films dispersed with precipitated TiN nanosized particles. The film color changed with Si content y and the annealing conditions, from carrot orange to cream yellow in the as‐deposited films due to their oxynitride nature, and from dark green to canary yellow and from iron blue to horizon blue at respective annealing temperatures of 800°C and 900°C due to metallic nature of the TiN nanosized particles precipitated in the annealing.     

Synthesis and surface properties of novel fluoroalkyl end-capped amphiphilic fullerene cooligomers

New fluoroalkyl end-capped fullerene cooligomers were prepared by the reactions of fluoroalkanoyl peroxides with fullerene and comonomers such as acryloylmorpholine, N,N-dimethylacrylamide and acrylic acid. These fluorinated fullerene cooligomers were easily soluble in water and common organic solvents, and were able to reduce the surface tensions of both water and benzene, quite effectively. Additionally, these fullerene cooligomers were found to form a stable monomolecular film at the air-water interface, and the modified polystyrene surface treated with these cooligomers was shown to have a strong hydrophilicity with good oil repellency.     

Dehydrogenative Cracking of n-Butane over Modified HZSM-5 Catalysts

Dehydrogenative cracking reaction of n-butane was studied using HZSM-5 catalyst modified with various metal oxides. Alkaline earth (magnesium), transition metal (cobalt) and rare earth (lanthanum) elements are used for the modification. The selectivity of the products was studied at low conversion (20%). Methane, ethane, ethylene, propylene, butenes and butadiene were the main products. With the use of the cobalt- or magnesium-containing HZSM-5, dehydrogenative cracking was observed and the selectivity of ethylene was much larger than that of ethane. On the other hand, the selectivity of ethylene and ethane were almost the same in the reaction using the lanthanum-containing HZSM-5. It is considered that the cobalt- and magnesium-loaded sites on HZSM-5 played an important role in the dehydrogenative cracking.     

Preparation and characterization of natural rubber dispersed in nano-matrix

Preparation of a model nano-matrix-dispersed polymer was investigated in terms of graft-copolymerization of deproteinized natural rubber latex with styrene, using tert-butyl hydroperoxide/tetraethylenepentamine as an initiator. The products were characterized by ¹H-NMR spectroscopy and size-exclusion-chromatography after ozonolysis. The grafting efficiency of styrene was found to be more than 90% under the best condition of the graft-copolymerization. The morphology of the film specimens, prepared from graft-copolymers, was observed by transmission electron microscopy after staining the films with OsO₄. Natural rubber particle of about 0.5 μm in diameter was dispersed in polystyrene matrix of about 15 nm in thickness.     

PtZn‐ETS‐2: A novel catalyst for ethane dehydrogenation

Catalysts having unprecedented selectivity toward ethane dehydrogentation were prepared by combining platinum and zinc on the surface of the titanate ETS‐2. This high surface area, sodium titanate ion exchanger affords high metal dispersion, presents many active sites to the gas stream, and is free of any pore structure that can influence mass transfer to and away from the active sites. It was determined that the addition of zinc to platinum‐loaded ETS‐2 changes the electronic properties of the metals and significantly improves the specificity of the catalyst. By changing the zinc‐to‐platinum ratio, and by manipulating the space velocity of the gas, the production of side products and coke can be suppressed or eliminated. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4367–4376, 2015     

Effect of electro-chemical properties of sodium salts of various anions on their diffusional parameters in symmetrical cellulose acetate membranes

A relation was obtained between electro-chemical properties of sodium salts (NaCl, NaBr, and Na₂SO₄), and the thermodynamic property of permeability in symmetrical cellulose acetate membranes, the distribution coefficient K and the kinetic property, the overall diffusion coefficients D. K and D were obtained by the method we proposed using measured unsteady- and steady-state dialysis data. The K values increase with the increase of water content and are in the range of 10⁻² for sodium halides and 10⁻³ for Na₂SO₄. D is found to increase with the increase of the solute concentration, and the extrapolated values of D to zero concentration D⁽⁰⁾ are obtained as 0.015–0.03 μm²/s and increase with the increase of water content in the membrane. D can be divided into the concentration independent diffusion coefficients in the dense part of the membrane D_d and in the porous D_p, applying a two-part (perfect or dense and imperfect or porous) model of the membrane. Contrary to D_d, D_p increases with the increase of W_w and can be correlated as D_p,c = _d exp (γ × W_w). It is shown that the averaged D_d, _D increases with the increase of the quantity of the ionic mobility u of the solutes at infinite dilution divided by valence, and that the parameter γ increases with the increase of the ionic mobility u. The value of K increases slightly with the increase of water content and decreases with the increase of the Flory—Huggins parameter χ. The Flory—Huggins parameter χ is calculated from the measured values of distribution coefficients and data obtained from the literature. And it was found that the gradient of linear decrease of χ (λ_cation) depends on equivalent ionic conductivity of anion of salt, λ_an.     

A novel assay method for glycosphingolipid deacylase by enzyme-linked immunochemical detection of lysoglycosphingolipid

Lysoglycosphingolipids consist of a sphingoid long-chain base and monosaccharide or complex sugar, and they lack the fatty acyl group present in native glycosphingolipids. Less than 1 pmol of lyso-Forssman glycolipid and lysoganglioside GM1 were detected on a thin-layer chromatogram by an enzyme-linked immunochemical coloration method with anti-Forssman glycolipid antibody (FOM-1) and cholera toxin B subunit, respectively. Each spot between 1 and 100 pmol lyso-Forssman glycolipid was immunostained as densely as that of the same amount of native Forssman glycolipid. The density of the lyso-Forssman glycolipid spots increased proportionally with increment in the amount of lysoglycolipid. The density of spots of 0.2–100 pmol lysoganglioside GM1 was also proportional to the amount of each lyso-GM1 spot. These results indicated that less than 1 to 100 pmol of deacylated glycosphingolipid was quantifiable by the immunochemical coloration method with sugar chain-specific antibodies. Glycosphingolipid deacylase, which cleaved an amide bond between the sphingoid long-chain base and fatty acyl chain in ceramide of glycosphingolipid, was assayed by detecting the lyso-Forssman glycolipid produced. Lipophilic compounds, recovered from an aliquot of the reaction mixture of Forssman glycolipid and crude enzyme at appropriate times, were analyzed by thin-layer chromatography. It was found that lyso-Forssman glycolipid was produced in the first 1–2 h by the enzyme and production increased with incubation time. This coloration method is more sensitive and specific than the visualization method with a non-specific reagent such as orcinol-sulfuric acid reagent.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry