Dynamic material properties of wood subjected to low-velocity impact

This article studied the effects of low-velocity impact on the failure stresses and stiffness using a pendulum test. The specimens were of variable depth (20, 30, and 40 mm), a width of 50 mm, length of 650 mm, and span-length of 480 mm. The smallest specimen depth was similar to specimen sizes tested in the literature used to create the duration of load curve, while the largest specimen depth are considered structural size specimens. The impact was predicted using a numerical approach with Euler–Bernoulli beam, as well as Timoshenko beam theory, with a plastic contact law. The models were validated for impact from a low release-angle (where the beam remained elastic), but could use improvement for the force prediction at a high incidence velocity. The measured force signals were used as forcing functions to obtain the dynamic failure stresses for all of the evaluated specimens, and the Timoshenko–Goens–Hearmon Method to derive the dynamic E. The resulting strain rates ranged from 9.11?×?10^?5 s^?1 for the quasi-static specimens up to 25 s^?1 for the greatest incidence velocity. The results from this study suggest different duration of load factors than the Madison Curve, influencing the design of structures subjected to dynamic loading.     

Paper‐Derived Ferroelectric Ceramics: A Feasibility Study

Preceramic paper may serve as a preform to manufacture single sheet as well as multilayer porous ferroelectric ceramic products. In this article, the authors discuss the formation, microstructure, and properties of preceramic papers highly loaded with BaTiO₃ filler ranging from 70 to 80 vol% and their conversion into ceramic materials. In order to increase the density of the single sheets, post calendering is applied. These sheets are used for the fabrication of multilayer ceramics using warm lamination technique. After binder burnout and sintering up to 1300 °C for 2 h in air, porous paper‐derived multilayer BaTiO₃ is obtained. The effect of ceramic filler content and calendering on the residual porosity in sintered samples is studied. Furthermore, the influence of porosity on the microstructure, mechanical, dielectric, and piezoelectric properties of the sintered BaTiO₃ ceramics is investigated.

     

Selective toxicity of hydroxyl-rich carbon nanodots for cancer research

Nano Research - The toxicity of nanoparticles in a biological system is an integration of effects arising from surface functionality, particle size, ionic dissolution, etc. This complexity suggests...     

Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites

By increasing the density of interfaces in NiAl–CrMo in situ composites, the mechanical properties can be significantly improved compared to conventionally cast material. The refined microstructure is achieved by manufacturing through electron beam powder bed fusion (PBF-EB). By varying the process parameters, an equiaxed or columnar cell morphology can be obtained, exhibiting a plate-like or an interconnected network of the (Cr,Mo) reinforcement phase which is embedded in a NiAl matrix. The microstructure of the different cell morphologies is investigated in detail using scanning electron microscope, transmission electron microscopy, and atom probe tomography. For both morphologies, the mechanical properties at elevated temperatures are analyzed by compression and creep experiments parallel and perpendicular to the building direction. In comparison to cast NiAl and NiAl–(Cr, Mo), the yield strength of the PBF-EB fabricated specimens is significantly improved at temperatures up to 1,027 °C. While the columnar morphology exhibits the best improved mechanical properties at high temperatures, the equiaxial morphology shows nearly ideal isotropic mechanical behavior, which is a substantial advantage over directionally solidified material.     

A Hemispherical Image Sensor Array Fabricated with Organic Photomemory Transistors

Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m⁻²), along with a responsivity as high as 1.6 A W⁻¹ (wavelength = 465 nm) for a dark current of 0.24 A m⁻² (drain voltage = −1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.     

Autoimmunity, immunodeficiency and mucosal infections: chronic intestinal inflammation as a sensitive indicator of immunoregulatory defects in response to normal luminal microflora

Despite the fact that target antigens and the genetic basis of several autoimmune diseases are now better understood, the initial events leading to a loss of tolerance towards self-components remain unknown. One of the most attractive explanations for autoimmune phenomena involves various infections as possible natural events capable of initiating the process in genetically predisposed individuals. The most accepted explanation of how infection causes autoimmunity is based on the concept of "molecular mimicry" (similarity between the epitopes of an autoantigen and the epitopes in the environmental antigen). Infectious stimuli may also participate in the development of autoimmunity by inducing an increased expression of stress proteins (hsp), chaperones and transplantation antigens, which leads to abnormal processing and presentation of self antigens. Superantigens are considered to be one of the most effective bacterial components to induce inflammatory reactions and to take part in the development and course of autoimmune mechanisms. It has long been known that defects in the host defense mechanism render the individual susceptible to infections caused by certain microorganisms. Impaired exclusion of microbial antigens can lead to chronic immunological activation which can affect the tolerance to self components. Defects in certain components of the immune system are associated with a higher risk of a development of autoimmune disease. The use of animal models for the studies of human diseases with immunological pathogenesis has provided new insights into the influence of immunoregulatory factors and the lymphocyte subsets involved in the development of disease. One of the most striking conclusion arising from work with genetically engineered immunodeficient mouse models is the existence of a high level of redundancy of the components of the immune system. However, when genes encoding molecules involved in T cell immunoregulatory functions are deleted, spontaneous chronic inflammation of the gut mucosa (similar to human inflammatory bowel disease) develops. Surprisingly, when such immunocompromised animals were placed into germfree environment, intestinal inflammation did not develop. Impairment of the mucosal immune response to the normal bacterial flora has been proposed to play a crucial role in the pathogenesis of chronic intestinal inflammation. The use of immunodeficient models colonized with defined microflora for the analysis of immune reactivity will shed light on the mode of action of different immunologically important molecules responsible for the delicate balance between luminal commensals, nonspecific and specific components of the mucosal immune system.     

FRC measurement in intensive care patients. A definition of standards

Determination of Functional Residual Capacity (FRC) can be performed through washout methods, indicator gas dilution or bodyplethysmography. Some of these techniques have been adapted for use in intensive care patients whilst being mechanically ventilated. However, most measurement setups are bulky, cumbersome to use and their running costs are high. Hence FRC measurement has not become a routine method in intensive care although it offers considerable advantages in the management of ventilated patients such as the determination of "best PEEP", the detection of progressive alveolar collapse in the course of acute lung injury and during weaning from mechanical ventilation. Up to now most efforts to improve and simplify FRC measurement were made at the expense of accuracy. An ideal method ought to be accurate, easy to handle and cost-effective. It should supply not only FRC data but also information about intrapulmonary gas distribution and dead space. These demands can be met using modern data acquisition software. The pros and cons of all methods available for FRC measurement are discussed in view of their suitability for intensive care patients. A conventional nitrogen washout using emission spectroscopy for measurement of nitrogen concentration gives satisfying exact values for the determination of the parameters mentioned above. The measurement error can be lowered under 5% by special corrections for flow and nitrogen signal (delay and rise times, changes of gas viscosity). For flow measurement a normal pneumotachograph can be used. Using a laptop computer for data acquisition the bed-side monitor fulfills most of the demands in intensive care. It is then also possible to measure indices of intrapulmonary gas distribution such as Alveolar Mixing Efficiency and Lung Clearance Index.     

Atopic dermatitis and food allergy in infancy and childhood

Food allergies are causal factors for atopic dermatitis (AD) in 50% in infancy, in 20 to 30% in childhood, and only in 10 to 15% after puberty and in adulthood. Cow's milk, egg, fish, wheat, soy, nuts and citrus-fruits are the most proven allergens. Pseudoallergens, especially food-additiva, have to be regarded too. For the proof of the clinical relevance that food allergy is causing AD a positive result of elimination and provocation has to be required. When by these diagnostic procedure a special food is found as causing the AD it has to be eliminated in the diet of this patient. In severe cases of AD semi-elementary respectively few foods diets may be necessary. However in most cases of AD the "diet of choice" is an age related normal nutrition. To delay respectively to avoid the manifestation of atopy special recommendations for the nutrition of high risk newborns and infants (especially long breast feeding, late solid feeding) should be considered.     

Phantom study of optimization of spiral-CT and 3D reconstruction of the tracheobronchial system

PURPOSE: To optimise three-dimensional spiral CT of the tracheobronchial tree using adequate acquisition and reconstruction parameters for spiral CT of the chest. MATERIAL AND METHODS: Qualitative and quantitative assessment of different 3 D reconstructions of two test objects of the tracheobronchial tree depending on section thickness, reconstruction interval, pitch, and reconstruction algorithm used in spiral CT (Siemens, Somatom plus S) of the chest. The frequency of volume and stairstep artifacts was evaluated. The 3 D reconstructions were generated using a seeded VOI-technique (Allegro, ISG). RESULTS: Reduction of artifacts was achieved by decreasing section thickness. Increasing overlap of source images, lowering the pitch factor, and application of the reconstruction algorithm "slim". Section thickness was the single most important factor which was mainly responsible for the occurrence of volume artifacts. Stairstep artifacts were primarily influenced by the reconstruction interval. CONCLUSION: Spiral CT with a section thickness > 4 mm is not adequate for 3 D reconstructions of the tracheobronchial tree. Overlapping source images with a pitch of 1 and the reconstruction algorithm "slim" can be recommended to reduce artifacts.     

Liquidus temperatures for primary crystallization of cryolite in molten salt systems of interest for aluminum electrolysis

Temperatures for primary crystallization of Na₃AlF₆ in multicomponent electrolyte systems of interest for the aluminum electrolysis process were determined by thermal analysis. The results are presented as binary and quasibinary diagrams and discussed in view of the literature data. An empirical equation describing liquidus temperatures for primary crystallization of Na₃AlF₆ was derived: $$\begin{gathered} t/(^\circ C) = 1011 + 0.50[AlF_3 ] - 0.13[AIF_3 ] - \frac{{3.45[CaF_2 ]}}{{1 + 0.0173[CaF_2 ]}} \hfill \\ + 0.124[CaF_2 ] \cdot [AlF_3 ] - 0.00542([CaF_2 ] \cdot [AlF_3 ])^{1.5} \hfill \\ - \frac{{7.93[Al_2 O_3 ]}}{{1 + 0.0936[Al_2 O_3 ] - 0.0017[Al_2 O_3 ]^2 - 0.0023[AlF_3 ] \cdot [Al_2 O_3 ]}} \hfill \\ - \frac{{8.90[LiF]}}{{1 + 0.0047[LiF] + 0.0010[AlF3]^2 }} - 3.95[MgF_2 ] - 3.95 \hfill \\ \end{gathered} $$ wheret is the temperature in degree Celsius and the square brackets denote the weight percent of components in the system Na₃AlF₆-AlF₃-CaF₂-Al₂O₃-LiF-MgF₂-KF. The composition limitations are [AlF₃] ≈ [CaF₂] ≈ [LiF] < 20 wt pct, [MgF₂] ≈ [KF] < 5 wt pct, and [A1₂O₃] up to saturation.