Catalytic effect of ZrCrNi alloy on hydriding properties of MgH2

MgH₂ nanocomposites with ZrCrNi alloy obtained by high energy ball-milling were studied as-milled and after several hydriding-deydriding cycles. The microstructure and morphology of the samples was characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD patterns show that no phase formation between MgH₂ and elements of the alloys takes place during milling and after cycling. Different morphology of the powders as-milled and after cycling was observed by SEM. Pressure-composition isotherms of these composites were obtained in the pressure and temperature range of 0.1–15 bar and 200–300 °C respectively. The maximum reversible storage capacity was found to be 6.2 wt% at 300 °C. Absorption/desorption kinetics data at pressures of 0.1–5.0 bar and temperatures of 275 °C and 300 °C show that an activation process of about 20 cycles at 300 °C is necessary for stabilization of the kinetics and for achievement of the full hydrogen capacity. The thermodynamic parameters, i.e. enthalpy of formation and dissociation calculated using Van't Hoff plots, were found to be 73.53 kJ mol^?1 and 87.63 kJ mol^?1 respectively, in agreement with MgH₂ data reported in literature.     

The role of interface DoFs in decoupling of substructures based on the dual domain decomposition

The paper considers the decoupling problem, i.e. the identification of the dynamic behaviour of a structural subsystem, starting from the known dynamic behaviour of the coupled system, and from information about the remaining part of the structural system (residual subsystem). Typically, the FRF matrix of the coupled system is assumed to be known at the coupling DoFs (standard interface). To circumvent ill-conditioning around particular frequencies, some authors suggest the use of FRFs at some internal DoFs of the residual subsystem. In this paper, the decoupling problem is revisited in the general framework of frequency based substructuring. Specifically, the dual domain decomposition is used by adding a fictitious subsystem, which is the negative of the residual subsystem, to the coupled system. In this framework, the use of internal DoFs of the residual subsystem, in addition to coupling DoFs, appears quite natural (extended interface). The effects of using an extended interface are widely discussed: the main drawback is that the problem becomes singular at any frequency. However, this singularity is easily removed by using standard smart inversion techniques. The approach is tested on a discrete system describing a two-speed transmission, using simulated data polluted by noise. Results are compared with those obtained from existing approaches.     

Personalized Medicine in Gastrointestinal Stromal Tumor (GIST): Clinical Implications of the Somatic and Germline DNA Analysis

Gastrointestinal stromal tumors (GIST) are the most common mesenchymal tumors of the gastrointestinal tract. They are characterized by gain of function mutations in KIT or PDGFRA tyrosine kinase receptors, with their consequent constitutive activation. The gold standard therapy is imatinib that offers a good and stable response for approximately 18–36 months. However, resistance is very common and it is vital to identify new biomarkers. Up until now, there have been two main approaches with focus to characterize novel targets. On the one hand, the focus is on the tumor genome, as the final clinical outcome depends mainly from the cancer specific mutations/alterations patterns. However, the germline DNA is important as well, and it is inconceivable to think the patients response to the drug is not related to it. Therefore the aim of this review is to outline the state of the art of the personalized medicine in GIST taking into account both the tumor DNA (somatic) and the patient DNA (germline).     

Innovative microcrystalline cellulose composites as lining adhesives for canvas

Thin adhesive composite films were prepared by melt‐compounding and compression molding of a thermoplastic resin (Paraloid^® B72) widely used for art protection and restoration with a microcrystalline cellulose powder (MCC). To simulate an oil painting restoration work, MCC‐based composites were applied as lining adhesives on two kinds of canvases (English linen and woven polyester). Interestingly, single–lap shear tests both in quasi‐static and creep conditions showed a remarkable stabilizing effect provided by MCC addition. Post‐mortem microstructural analysis of the overlap adhesive area proved how MCC introduction did not change the fracture behavior of the bonded joints. The visual assessment of transparency and color measurements evidenced a chromatic variation of MCC‐based films with a filler amount of 30 wt%, while, UV‐vis analysis showed a decrease of relative transmittance in proportion to the MCC content. Additionally, rheological tests highlighted a viscosity increase for Paraloid B72 in both dry and wet conditions (T = 23°C and RH = of 55%) as the MCC content increases. POLYM. ENG. SCI., 55:1349–1354, 2015. © 2015 Society of Plastics Engineers     

The Scaffold Protein IscU Retains a Structured Conformation in the FeS Cluster Assembly Complex

IscU and IscS are two essential proteins in the machine responsible for the biogenesis of iron–sulfur clusters, prosthetic groups that are involved in several essential functions. The scaffold protein IscU is the temporary acceptor of the cluster that results when the protein forms a 110 kDa complex with the desulfurase IscS. In the absence of zinc, which stabilises the folded state, IscU is present in solution in equilibrium between a structured and an unstructured form. It has been suggested that IscS preferentially binds unstructured IscU, although crystal structures indicate otherwise. To learn more about the IscS–IscU complex, we have used advanced solution NMR techniques to observe directly the state of fold of IscS‐bound IscU. We present unambiguous evidence that IscU is folded in the complex and that the unstructured form does not bind to IscS. Our data correlate with several observations and explain an IscU‐related pathology.     

Chiral Resolution and Pharmacological Characterization of the Enantiomers of the Hsp90 Inhibitor 2‐Amino‐7‐[4‐fluoro‐2‐(3‐pyridyl)phenyl]‐4‐methyl‐7,8‐dihydro‐6H‐quinazolin‐5‐one Oxime

Heat‐shock protein 90 (Hsp90) is a molecular chaperone involved in the stabilization of key oncogenic signaling proteins, and therefore, inhibition of Hsp90 represents a new strategy in cancer therapy. 2‐Amino‐7‐[4‐fluoro‐2‐(3‐pyridyl)phenyl]‐4‐methyl‐7,8‐dihydro‐6H‐quinazolin‐5‐one oxime is a racemic Hsp90 inhibitor that targets the N‐terminal adenosine triphosphatase site. We developed a method to resolve the enantiomers and evaluated their inhibitory activity on Hsp90 and the consequent antitumor effects. The (S) stereoisomer emerged as a potent Hsp90 inhibitor in biochemical and cellular assays. In addition, this enantiomer exhibited high oral bioavailability in mice and excellent antitumor activity in two different human cancer xenograft models.     

Effect of the water sorption on the mechanical response of microcrystalline cellulose‐based composites for art protection and restoration

Thermoplastic composites based on a commercial acrylic matrix widely used in the field of art protection and restoration (Paraloid B72) and various concentrations (up to 30 wt %) of microcrystalline cellulose powder (MCC) were prepared by melt‐compounding and compression molding. The mechanical behavior of the resulting materials conditioned at a temperature of 23°C and a relative humidity level of 55% was compared to that of the corresponding dried materials. Even though the moisture absorption of the filler was lower than the neat matrix, the maximum moisture content increased with the MCC amount, probably due to the preferential water diffusion path through the microvoids and/or the filler‐matrix interface. Although the increase of moisture content for filled samples, DMTA analysis evidenced a stabilization upon MCC introduction, with an increase of the storage modulus and a decrease of the thermal expansion coefficient proportional to the filler loading. A similar trend was displayed by the corresponding dried materials. The tensile elastic modulus and the ultimate properties such as the stress at break and the tensile energy to break (TEB) of conditioned samples increased proportionally to the filler amount. On the contrary, the failure properties of dried composites were negatively affected by the presence of the microcellulose. It is worthwhile to report that a significant improvement of the creep stability was induced by MCC introduction both for dried and conditioned samples. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40741.     

Photorefractivity of poly-N-vinylindole-based materials as compared with that of poly-N-vinylcarbazole-based blends

The asymmetric two-beam coupling technique has been employed to measure the photorefractivity of thin films of polymer blends containing 2,5-dimethyl-4-(p-nitrophenylazo)anisole as the nonlinear optical component. Poly-(1-vinylindole) and poly-(2,3-dimethyl-1-vinylindole) were the photoconductive polymer counterparts. The values of the photorefractivity are reported. It appears that they are comparable with those of similar blends based on the well-known poly-(9-vinylcarbazole) (PVK), here considered as a reference standard. Careful differential scanning calorimetry analyses have been accomplished on the different blends taken into account to rationalize the significantly longer shelf lifetime of the indolyl-based films with respect to the PVK-based blends.     

Natural radionuclides in the rocks of the Valle del Cervo Pluton in Piedmont

Monitoring of the gamma radiation in Valle del Cervo Pluton was performed by determining U and Th contents in the main rock types cropping out over the entire area and pertaining to the granitic complex, syenitic complex and monzonitic complex. In particular, syenitic rocks were largely used as building and ornamental materials (e.g. Sienite della Balma). All the samples are fresh and do not present joints or fractures filled with U minerals. In the crushed samples the activity of uranium varies from 346 to 764 Bq/kg. Concentration of thorium varies from 202 to 478 Bq/kg. For all the analysed rocks uranium activity is higher than thorium one. The lowest value of radioactive concentration is referred to rocks of the granitic complex. The most active rocks are syenites. The data confirm the high activities of Valle del Cervo rock types, strongly connected with high K content of the source magma (geochemical signature); on the contrary, the activity seems to be not related to the location of the samples.     

Extremely low frequency-magnetic fields (ELF-EMF) occupational exposure and natural killer activity in peripheral blood lymphocytes

Extremely Low Frequency-Magnetic Fields (ELF-MF) are possible carcinogens to humans and some data suggest that they can act as promoters or progressors. Since NK cells play a major role in the control of cancer development, an adverse effect on ELF-MF on NK function has been hypothesized. We examined NK activity in 52 workers exposed to different levels of ELF-MF in various activities. Individual exposure was monitored during 3 complete work-shifts using personal dosimeters. Environmental exposure was also monitored. ELF-MF levels in the workers were expressed as Time-Weighted Average (TWA) values. NK activity was measured in peripheral blood lymphocytes (PBL). In the whole group the median occupational TWA was 0.21 microT. According to the TWA levels, workers were classified as low exposed (26 subjects, TWA < or =0.2 microT) and higher exposed workers (26 subjects; TWA >0.2 microT). In higher exposed workers, we observed a trend to reduce NK activity compared to low exposed, but the difference was not significant. Then we selected a subgroup of highest exposed workers (12 subjects; TWA >1 microT); no difference was observed between low and highest exposed subjects in the main personal variables. Considering both E:T ratios from 12:1 to 50:1 and Lytic Units, a significant reduction in NK activity was observed in the highest exposed workers compared to the low exposed. Multivariate analysis showed a significant negative correlation between exposure and LU, while no correlation was evidenced with other personal characteristics. ELF-MF are considered possible carcinogens, and existing data suggest that they can act as promoters. Due to the role of NK activity in host defence against cancer, the results obtained in this study in workers exposed to ELF-MF levels exceeding 1 microT are in agreement with this hypothesis, and support the need for further investigation in this field.