Estimation of liquid film mass transfer coefficients for columns randomly packed with partially wetted rings

A semitheoretical correlation based on an extension of the random length, random angle statistical model of Davidson (1959) is developed which predicts liquid film mass transfer coefficients in a column packed with partially wetted Raschig rings. The method takes into account the ring size and the mixing which occurs at the packing junctions and allows an estimation of the effective length of a packing piece for a particular liquid viscosity. Predicted values of mass transfer coefficients are in good agreement with the experimental values obtained for the carbon dioxide-water and carbon dioxide-aqueous glycerol systems at 25°C reported by Mangers and Ponter (1980b) and other systems reported by Sherwood and Holloway (1940).     

Aqueous gel permeation chromatography: The effect of solvent ionic strength

Porous glass packing materials have been used for gel permeation chromatography using an aqueous phosphate buffer. Elution volumes were determined for polystyrene sulfonates, dextrans, and small neutral and charged molecules at three different ionic strengths, viz., 0.01M, 0.1M, and 1.0M phosphate, pH 7.0. The pore diameters of the glasses studied were 75, 240, 700, and 2000 Å. Elution volumes of nonionic species were unaffected by changing the solvent ionic strength. Elution volumes of charged species were markedly affected by the ionic strength of the solvent. This was attributed to a combination of decreased polymer dimensions and decreased ionic exclusion with increasing buffer concentration. The use of low ionic strength solvents may be exploited to tailor the separating range for polyelectrolytes with porous glass packings. This is particularly useful in the low molecular weight range where the lowest pore size available is 75 Å.     

A wireless embedded tongue tactile biofeedback system for balance control

We describe the architecture of an original biofeedback system for balance improvement for fall prevention and present results of a feasibility study. The underlying principle of this biofeedback consists of providing supplementary information related to foot sole pressure distribution through a wireless embedded tongue-placed tactile output device.Twelve young healthy adults voluntarily participated in this experiment. They were asked to stand as immobile as possible with their eyes closed in two conditions of no-biofeedback and biofeedback. Centre of foot pressure (CoP) displacements were recorded using a force platform. Results showed reduced CoP displacements in the biofeedback relative to the no-biofeedback condition.On the whole, the present findings evidence the effectiveness of this system in improving postural control on young healthy adults. Further investigations are needed to strengthen the potential clinical value of this device.     

Wire + Arc Additive Manufacturing

Depositing large components (>10?kg) in titanium, aluminium, steel and other metals is possible using Wire + Arc Additive Manufacturing. This technology adopts arc welding tools and wire as feedstock for additive manufacturing purposes. High deposition rates, low material and equipment costs, and good structural integrity make Wire+Arc Additive Manufacturing a suitable candidate for replacing the current method of manufacturing from solid billets or large forgings, especially with regards to low and medium complexity parts. A variety of components have been successfully manufactured with this process, including Ti–6Al–4V spars and landing gear assemblies, aluminium wing ribs, steel wind tunnel models and cones. Strategies on how to manage residual stress, improve mechanical properties and eliminate defects such as porosity are suggested. Finally, the benefits of non-destructive testing, online monitoring and in situ machining are discussed.     

Evaluation of amplitude-based sorting algorithm to reduce lung tumor blurring in PET images using 4D NCAT phantom

PURPOSE: develop and validate a PET sorting algorithm based on the respiratory amplitude to correct for abnormal respiratory cycles. METHOD AND MATERIALS: using the 4D NCAT phantom model, 3D PET images were simulated in lung and other structures at different times within a respiratory cycle and noise was added. To validate the amplitude binning algorithm, NCAT phantom was used to simulate one case of five different respiratory periods and another case of five respiratory periods alone with five respiratory amplitudes. Comparison was performed for gated and un-gated images and for the new amplitude binning algorithm with the time binning algorithm by calculating the mean number of counts in the ROI (region of interest). RESULTS: an average of 8.87+/-5.10% improvement was reported for total 16 tumors with different tumor sizes and different T/B (tumor to background) ratios using the new sorting algorithm. As both the T/B ratio and tumor size decreases, image degradation due to respiration increases. The greater benefit for smaller diameter tumor and lower T/B ratio indicates a potential improvement in detecting more problematic tumors.     

Performance of a modified polling strategy for broadband wireless lans in a harsh fading environment

In this paper, we consider a radio-based communication network in which a single, high speed radio channel is shared by some plurality of small portable notebooks. Such a system has the potential to provide LAN-like service within buildings, allowing the portable "notebooks" to access the CPU and data resources of a wired network. In this harsh indoor fading environment, a base-station approach is used. We propose a modified polling scheme for the indoor radio LAN channel. The base station regularly polls each remote, in response to which the remote either generates a "keep alive" packet or a request packet, allowing the base to fetch the requested information from the wired network and scheduling a reply to that remote. The efficiency of such a scheme is studied and the expected turn-around delay as a function of network loading is approximately obtained. A system stability under such a scheme is derived. For a polling cycle of 20 milliseconds and a network containing 10 or 50 users, for example, the maximum link efficiency is 97% and 87%, respectively, assuming that the link speed is 5 Mbps.The Center for Telecommunications Research is an NSF Engineering Research Center. This work was supported under NSF grant #ECD88-1 1111.     

Development of a measure for the information technology infrastructure construct

The goal of this research was to operationalize the information technology infrastructure (ITI) concept by identifying its underlying dimensions and establishing a valid and reliable measure for the construct. In order to accomplish this task with the highest degree of certainty, two approaches were sequentially applied: exploratory factor analysis and confirmatory factor analysis. In evaluating the confirmatory factor model, a step-by-step process was employed, assessing unidimensionality, reliability, discriminant validity, and nomological validity. The dimensions of ITI were determined to be: Chief Information Officer, IT Planning, IT Security, Technology Integration, Advisory Committee, Enterprise Model, and Data Administration. Researchers may now make use of this validated ITI measure to conduct investigations of ITI and other organizational measures. Implications of the ITI measure with other organizational initiatives such as electronic commerce and knowledge management are explored.     

Remotely sensed indicators of habitat heterogeneity: Use of synthetic aperture radar in mapping vegetation structure and bird habitat

An integrated remote sensing/field ecology project linked the use of synthetic aperture radar (SAR) and aerial photography to studies of landscape spatial heterogeneity and bird community ecology. P-, L-, and C-band SAR data, collected over a section of Kakadu National Park in Australia's Northern Territory during the Joint NASA/Australia DC-8 data acquisition campaign, were analyzed in light of field data integrating vegetation structure and floristics with bird abundances across a heterogeneous study site. Results indicate that SAR data are able to discern structural differences relevant to bird habitat quality within floristically homogeneous stands, while multispectral sensors successfully identified floristic differences among habitat types. Simplifying indices of bird diversity showed ambiguous changes across the site; however, the abundances of individual species were observed to change significantly across both floristic and structural gradients. These results suggest that efforts to map bird diversity should focus on species-specific habitat relationships and that some measure of vegetation structure is needed to understand bird habitat. The approach employed here advances the use of SAR data in the three-dimensional mapping of animal habitats from remotely sensed data, and extends current capabilities for mapping and modeling large-scale patterns in the distribution of biological diversity.