Features of a control blade degradation observed in situ during severe accident conditions in boiling water reactors

In the present paper, new results using in situ video are presented regarding boiling water reactor (BWR) control blade degradation up to 1750 K at the beginning of a nuclear severe accident. Energy-dispersive X-ray spectrometry (EDS) mapping indicated stratification of the absorber blade melt with formation of a chromium and boride-enriched layer. High-content-B- and C-containing material with increased melting temperature acted like a shielding and was found to prevent further relocation of control blade claddings. The interacted layers around the B₄C-granules prevented direct steam attack of residual B₄C. The results provide new insights for understanding of the absorber blade degradation mechanism under reducing conditions specific to Fukushima Dai-Ichi Unit 2 resulting from prolonged steam starvation.     

Counting Fluorescent Dye Molecules on DNA Origami by Means of Photon Statistics

Obtaining quantitative information about molecular assemblies with high spatial and temporal resolution is a challenging task in fluorescence microscopy. Single‐molecule techniques build on the ability to count molecules one by one. Here, a method is presented that extends recent approaches to analyze the statistics of coincidently emitted photons to enable reliable counting of molecules in the range of 1–20. This method does not require photochemistry such as blinking or bleaching. DNA origami structures are labeled with up to 36 dye molecules as a new evaluation tool to characterize this counting by a photon statistics approach. Labeled DNA origami has a well‐defined labeling stoichiometry and ensures equal brightness for all dyes incorporated. Bias and precision of the estimating algorithm are determined, along with the minimal acquisition time required for robust estimation. Complexes containing up to 18 molecules can be investigated non‐invasively within 150 ms. The method might become a quantifying add‐on for confocal microscopes and could be especially powerful in combination with STED/RESOLFT‐type microscopy.     

Subspace identification analysis of RFX and T2R reversed-field pinches

Input–output datasets from two magnetic confinement fusion (MCF) experiments of the reversed-field pinch (RFP) type are examined. The RFP datasets, which are samples of the distributed magnetic field dynamics, are naturally divided into many smaller batches due to the pulsed-plasma operation of the experiments. The two RFP experiments considered are (i) EXTRAP T2R (T2R) with 64 inputs and 64 outputs and (ii) RFX-mod (RFX) with 192 inputs and 192 outputs. Both T2R and RFX are magnetohydrodynamically unstable and operates under magnetic feedback with optional dither injection. Using subspace system identification techniques and randomised cross-validation (CV) methods to minimise the generalisation error, state-space orders of the empirical systems are suggested. These system orders are compared to “stabilisation diagrams” commonly used in experimental modal analysis practice. The relation of the CV system order to the decay of the singular values from the subspace method is observed. Both (i) stable vacuum diffusion and (ii) unstable plasma response datasets are analysed. Apparent simulation and prediction errors are quantified for both cases using a deviation-accounted-for index. These results are purely data-driven. A simple approach towards exploitation of the subspace techniques for finite-element model refinement and data confrontation is presented.     

Analyzing probabilistic pushdown automata

The paper gives a summary of the existing results about algorithmic analysis of probabilistic pushdown automata and their subclasses.     

Coexistence of Superconductivity and Antiferromagnetism in Heavy-Fermion Intermetallic Compound CeRhIn5

An interference of heavy-fermion superconductivity (SC) and antiferromagnetism (AFM) has been studied in the framework of the periodic Anderson model with the superexchange interaction between localized electrons. It has been shown that pressure-induced energy change of the localized states leads to modifying antiferromagnetic and superconducting order parameters. Conditions have been found for the coexistence of SC and AFM in the model. Theoretical results of the pressure effects on the ground state character of the heavy-fermion systems are in good agreement with experimental data for a rare-earth intermetallic compound CeRhIn₅. The divergence of the effective electron mass produced by suppressing the long-range antiferromagnetic order has also been analyzed in the same framework.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Synthesis and structure of large single crystalline silver hexagonal microplates suitable for micromachining

We report a simple one-step synthesis method of large single crystalline Ag (111) hexagonal microplates with sharp edges and a size of up to tens of microns. Single silver crystals were produced by reduction silver nitrate aqueous solution with 4-(methylamino)phenol sulfate. Scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, selected area electron diffraction and optical microscopy techniques were combined to characterize the crystals. It is shown that the microplates can be easily dispersed and transferred as single objects onto different substrates and subsequently used as a high quality plasmonic starting material for micromachining of future nanocomponents, using modern top-down techniques like focused-ion beam milling and gas injection deposition.     

Enhancing Photovoltaic Performance Using an All‐Conjugated Random Copolymer to Tailor Bulk and Interfacial Morphology of the P3HT:ICBA Active Layer

Bulk heterojunction (BHJ) solar cells are fabricated using active material blends of poly(3‐hexylthiophene) (P3HT) donor, indene‐C₆₀ bisadduct (ICBA) acceptor, and an all‐conjugated random copolymer (RCP) additive. By optimizing RCP loading, power conversion efficiencies (PCEs) up to 20% higher than those of a binary P3HT:ICBA mixture are achieved. The improved device characteristics are rationalized in terms of the differences between the photoactive thin film morphologies. Energy‐filtered transmission electron micro­scopy reveals that incorporation of the RCP improves the degree of structural order of the BHJ fibrillar network and increases the extent of microphase separation between P3HT and ICBA. Additionally, a combination of atomic force microscopy and X‐ray photoelectron spectroscopy analysis indicates segregation of the RCP at the free interface, leading to a shift in the surface potentials measured by Kelvin probe force microscopy. These changes, both in the bulk morphology and in the interfacial composition/energetics, are correlated to improved carrier collection efficiency due to a reduction of non‐geminate recombination, which is measured by charge extraction of photo­generated carriers by linearly increasing voltage.