From hospital to municipal cogeneration systems: an Italian case study

A mixed integer linear programming model combined with a more traditional design by scenarios is proposed to optimize facilities size and operation mode of a municipal energy system involving significant civil centres and a hospital. Moving from the need of a new heat and power station for the local hospital due to the construction of new pavilions, the opportunity of involving other centres in the neighbourhood in a distributed cogeneration system is analysed, increasing system complexity step by step. Smaller cogeneration units tailored to hospital needs are rewarding ventures with relatively low risks but, in a country whose traditional power generation systems heavily rely on fossil fuels and where energy policy and market conditions can make it profitable to sell surplus power, district heating systems foster the installation of larger cogenerators and lead thereby to higher profits and to better performance as for primary energy savings and greenhouse gases emission reduction. Copyright © 2006 John Wiley & Sons, Ltd.     

First-Void Urine Microbiome in Women with Chlamydia trachomatis Infection

Background: Chlamydia trachomatis (CT) is the agent of the most common bacterial sexually transmitted infection worldwide. Until now, little information is available about the microbial composition of urine samples during CT urethritis. Therefore, in this study, we characterized the microbiome and metabolome profiles of first-void urines in a cohort of women with CT urethral infection attending an STI clinic. Methods: Based on CT positivity by nucleic acid amplification techniques on urine samples, the enrolled women were divided into two groups, i.e., “CT-negative” (n = 21) and “CT-positive” (n = 11). Urine samples were employed for (i) the microbiome profile analysis by means of 16s rRNA gene sequencing and (ii) the metabolome analysis by ¹H-NMR. Results: Irrespective of CT infection, the microbiome of first-void urines was mainly dominated by Lactobacillus, L. iners and L. crispatus being the most represented species. CT-positive samples were characterized by reduced microbial biodiversity compared to the controls. Moreover, a significant reduction of the Mycoplasmataceae family—in particular, of the Ureaplasma parvum species—was observed during CT infection. The Chlamydia genus was positively correlated with urine hippurate and lactulose. Conclusions: These data can help elucidate the pathogenesis of chlamydial urogenital infections, as well as to set up innovative diagnostic and therapeutic approaches.     

Morphological and Biological Evaluations of Human Periodontal Ligament Fibroblasts in Contact with Different Bovine Bone Grafts Treated with Low-Temperature Deproteinisation Protocol

Several types of deproteinised bovine bone mineral (DBBM) are available on the market, and each one is obtained with a thermic and chemical process that can differ, achieving different results. Currently, several protocols using low temperature are suggested to reduce the possible particle crystallisation during the production process. This study aimed to evaluate the biomorphological reaction of periodontal fibroblast cultures in contact with different DBBM particles treated with a low-temperature protocol (Thermagen^®) and without exposure to sodium hydroxide (NaOH). Morphological evaluation was performed using light, confocal laser, and scanning electron microscopy, and the biological reaction in terms of proliferation was performed using an XTT proliferation assay at 24 h (T1), 72 h (T2), and 7 days (T3). The morphological analysis highlighted how the presence of the materials stimulated a change in the morphology of the cells into a polygonal shape, surface reactions with the thickening of the membrane, and expression of actin. In particular, the morphological changes were appreciable from T1, with a progressive increase in the considered morphological characteristics at T2 and T3 follow-ups. The proliferation assay showed a statistical significance between the different experimental materials and the negative control in T2 and T3 follow-ups. The post hoc analysis did not reveal any differences between the materials. In conclusion, the grafts obtained with the low-temperature extractions protocol and not exposed to NaOH solution showed positive morphological reactions with no differences in the sizes of particles.     

Making a mesh router/gateway from a smartphone: Is that a practical solution?

This paper aims at answering the question whether it is practical to build a mesh-phone or not. A mesh-phone is a smartphone acting as a mesh router, i.e. either actively participating in the process of packet forwarding towards a mesh gateway, or acting itself as a gateway toward the Internet. Technical aspects of the mesh-phone implementation, such as design constraints and implementation details, are addressed. The technical feasibility is validated by describing the implementation of a prototype of the mesh-enabled phone over the Openmoko^TM open platform. Besides technical feasibility also convenience of the addressed solution is analyzed in terms of the consumed power, and some “energy-saving” related enhancements are suggested to be applied to future user’s devices.     

Colloidal Photonic Crystals Doped with Gold Nanoparticles: Spectroscopy and Optical Switching Properties

Polystyrene artificial opals with few gold nanoparticles (AuNp) embedded in the interstices (doping) are grown by using the meniscus technique starting from a mixed suspension of microspheres and AuNp. Samples having different sphere diameters and nanoparticle loads have been prepared. Their reflectance spectra clearly show a dramatic bathochromic shift of the photonic stop band (up to 1400 cm^–1) and a reduction of its full width half maximum, due to an increase of the effective refractive index of about 8 % with respect to bare opals, which is accounted for by analytical theoretical models. Reflectance spectra do not show any direct evidence of AuNp absorption even at the higher AuNp doping level. Nanosecond transient absorption measurements on these systems indicate that a variation of transmission (optical switching) of about 150 % is observed for AuNp doped opals upon photoexcitation with 9 ns laser pulses at 532 nm. No switching is instead observed for bare opals.     

Exploring How to Increase the Brightness of Surface‐Enhanced Raman Spectroscopy Nanolabels: The Effect of the Raman‐Active Molecules and of the Label Size

Due to the surface‐enhanced Raman scattering (SERS) effect, SERS labels based on noble‐metal nanoparticles loaded with Raman‐active molecules are good candidates for ultrasensitive multiplexed assays and in vitro/in vivo imaging. However, understanding how to maximize the brightness of such labels is of paramount importance for their widespread application. The effective differential Raman scattering cross‐section (dσ_R/dΩ) of SERS labels made of pegylated gold nanoparticles loaded with various Raman active molecules (Raman reporters) is studied. It is found that proper choice of the Raman reporter and of nanoparticle size can enhance the dσ_R/dΩ by several orders of magnitude. The experimental results are understood by considering the molecular cross‐section for resonant Raman scattering and the local electromagnetic enhancement factor (G_SERS) in the nearby of gold nanoparticles. These results are useful to guide the design of SERS labels with improved performances and to provide a reference for the comparison of the absolute value of the dσ_R/dΩ of SERS labels based on metal nanoparticles.     

Pectic Galactan Polysaccharide-Based Gene Delivery System for Targeting Neuroinflammation

Treating neuroinflammation-related injuries and disorders through manipulation of neuroinflammation functions is being heralded as a new therapeutic strategy. In this study, a novel pectic galactan (PG) polysaccharide based gene therapy approach is developed for targeting reactive gliosis in neuroinflammation. Galectin-3 (Gal-3) is a cell protein with a high affinity to β-galactoside sugars and is highly expressed in reactive gliosis. Since PG carries galactans, it can target reactive gliosis via specific carbohydrate interaction between galactan and Gal-3 on the cell membrane, and therefore can be utilized as a carrier for delivering genes to these cells. The carrier is synthesized by modifying quaternary ammonium groups on the PG. The resulting quaternized PG (QPG) is found to form complexes with plasmid DNA with a mean diameter of 100 nm and have the characteristics required for targeted gene therapy. The complexes efficiently condense large amounts of plasmid per particle and successfully bind to Gal-3. The in vivo study shows that the complexes are biocompatible and safe for administration and can selectively transfect reactive glial cells of an induced cortical lesion. The results confirm that this PG-based delivery system is a promising platform for targeting Gal-3 overexpressing neuroinflammation cells for treating neuroinflammation-related injuries and neurodegenerative diseases.     

Accelerated Ionic Motion in Amorphous Memristor Oxides for Nonvolatile Memories and Neuromorphic Computing

Memristive devices based on mixed ionic–electronic resistive switches have an enormous potential to replace today's transistor‐based memories and Von Neumann computing architectures thanks to their ability for nonvolatile information storage and neuromorphic computing. It still remains unclear however how ionic carriers are propagated in amorphous oxide films at high local electric fields. By using memristive model devices based on LaFeO₃ with either amorphous or epitaxial nanostructures, we engineer the structural local bonding units and increase the oxygen‐ionic diffusion coefficient by one order of magnitude for the amorphous oxide, affecting the resistive switching operation. We show that only devices based on amorphous LaFeO₃ films reveal memristive behavior due to their increased oxygen vacancy concentration. We achieved stable resistive switching with switching times down to microseconds and confirm that it is predominantly the oxygen‐ionic diffusion character and not electronic defect state changes that modulate the resistive switching device response. Ultimately, these results show that the local arrangement of structural bonding units in amorphous perovskite films at room temperature can be used to largely tune the oxygen vacancy (defect) kinetics for resistive switches (memristors) that are both theoretically challenging to predict and promising for future memory and neuromorphic computing applications.