Accelerated Ionic Motion in Amorphous Memristor Oxides for Nonvolatile Memories and Neuromorphic Computing

Memristive devices based on mixed ionic–electronic resistive switches have an enormous potential to replace today's transistor‐based memories and Von Neumann computing architectures thanks to their ability for nonvolatile information storage and neuromorphic computing. It still remains unclear however how ionic carriers are propagated in amorphous oxide films at high local electric fields. By using memristive model devices based on LaFeO₃ with either amorphous or epitaxial nanostructures, we engineer the structural local bonding units and increase the oxygen‐ionic diffusion coefficient by one order of magnitude for the amorphous oxide, affecting the resistive switching operation. We show that only devices based on amorphous LaFeO₃ films reveal memristive behavior due to their increased oxygen vacancy concentration. We achieved stable resistive switching with switching times down to microseconds and confirm that it is predominantly the oxygen‐ionic diffusion character and not electronic defect state changes that modulate the resistive switching device response. Ultimately, these results show that the local arrangement of structural bonding units in amorphous perovskite films at room temperature can be used to largely tune the oxygen vacancy (defect) kinetics for resistive switches (memristors) that are both theoretically challenging to predict and promising for future memory and neuromorphic computing applications.     

Optimization‐based adaptive sliding mode control with application to vehicle dynamics control

This paper presents the design of a new adaptive optimization‐based second‐order sliding mode control algorithm for uncertain nonlinear systems. It is designed on the basis of a second‐order sliding mode control with optimal reaching, with the aim of reducing the control effort while maintaining all the positive aspects in terms of finite‐time convergence and robustness in front of matched uncertainties. These features are beneficial to guarantee good performance in case of vehicle dynamics control, a crucial topic in the light of the increasing demand of semiautonomous and autonomous driving capabilities in commercial vehicles. The new proposal is theoretically analyzed, as well as verified relying on an extensive comparative study, carried out on a realistic simulator of a 4‐wheeled vehicle, in the case of a lateral stability control system.     

Individual learning goal orientations in self‐managed team‐based organizations: A study on individual and contextual variables

Previous research has shown the importance of individual learning goal orientation for both job and task performance and consequently organizational performance. Despite its importance, knowledge on the antecedents of learning goal orientation remains scarce, especially in the context of self‐managing team‐based organizations. In fact, most of the research on goal orientation antecedents has been focused on individual characteristics, belief, and ability, while the contextual factors that might influence them remain unspecified. We build on and further extend earlier studies by jointly exploring the role of individual and contextual factors affecting individual learning orientation. In particular, this study combines individual informal social network, self‐efficacy, performance feedbacks, and team identification into a model that explains individuals' learning goal orientation within self‐managing team‐based organizations. The model was empirically tested on a sample of 104 individuals belonging to an R&D organization relying on self‐managing teams. Results show that performance feedback has a negative direct effect, while team identification has a positive direct effect on individual learning goal orientation. In addition, we found that individual self‐efficacy is a mediator of the relationships between performance feedback and brokerage in the advice network and individual learning goal orientation. Finally, we did not find a relationship between centrality in the friendship network and individual learning goal orientation.     

Structure–Activity Relationships of Benzenesulfonamide‐Based Inhibitors towards Carbonic Anhydrase Isoform Specificity

Carbonic anhydrases (CAs) are implicated in a wide range of diseases, including the upregulation of isoforms CA IX and XII in many aggressive cancers. However, effective inhibition of disease‐implicated CAs should minimally affect the ubiquitously expressed isoforms, including CA I and II, to improve directed distribution of the inhibitors to the cancer‐associated isoforms and reduce side effects. Four benzenesulfonamide‐based inhibitors were synthesized by using the tail approach and displayed nanomolar affinities for several CA isoforms. The crystal structures of the inhibitors bound to a CA IX mimic and CA II are presented. Further in silico modeling was performed with the inhibitors docked into CA I and XII to identify residues that contributed to or hindered their binding interactions. These structural studies demonstrated that active‐site residues lining the hydrophobic pocket, especially positions 92 and 131, dictate the positional binding and affinity of inhibitors, whereas the tail groups modulate CA isoform specificity. Geometry optimizations were performed on each ligand in the crystal structures and showed that the energetic penalties of the inhibitor conformations were negligible compared to the gains from active‐site interactions. These studies further our understanding of obtaining isoform specificity when designing small molecule CA inhibitors.     

Ambient levels of nitrogen dioxide (NO2) may reduce pollen viability in Austrian pine (Pinus nigra Arnold) trees--correlative evidence from a field study

A fully randomized sampling design was adopted to test whether pollen viability of Austrian pine (Pinus nigra Arnold) was impacted by NO(2) pollution. Spatial strata (500500 m each) with high (41.9-44.6 microg m(-3)) and low (15.4-21.0 microg m(-3)) NO(2) were selected from a defined population in a small area (236.5 km(2), <200 m range in elevation) in Northern Italy. Pollen viability was measured by means of the Tetrazolium (TTC) test. Analysis of variance by means of a generalised linear model showed that NO(2) was a significant factor (P=0.0425) affecting pollen viability. Within the treatment, no significant differences were detected among replicates. Within each replicate, sampling unit data were significantly different (P=0.000) and this suggested some improvement in the applied sampling design was needed. Pollen viability was significantly related to pollen germination (P<0.01) and tube length (P<0.01). This suggested a possible impact of NO(2) on the regeneration of Austrian pine in polluted environments.     

Evaluation of batch adsorption of chromium ions on natural and crosslinked chitosan membranes

Removal of chromium ions from aqueous solutions by using natural and crosslinked chitosan membranes was achieved using batch adsorption experiments. The effect of pH (6.0 and 2.0), concentration of chromium ions and crosslinking agents (glutaraldehyde: GLA and epichlorohydrin: ECH) on the adsorption properties of chitosan membranes was analyzed. The experimental equilibrium data was fitted to Langmuir and Freundlich models. Through the model curves, it was possible to observe that the amount of chromium ions adsorbed was significantly higher for crosslinked membranes compared to non-crosslinked chitosan. The maximum adsorbed amount was about 1400 mg g(-1) for ECH-crosslinked chitosan at pH 6.0. The adsorption rates for crosslinked chitosan membranes with glutaraldehyde and epichlorohydrin were similar for natural chitosan. Desorption study using NaCl (1 mol L(-1)) solution was performed on chitosan membranes, in order to recover chromium ions and to determine the suitable number of cycles for repeated use of these membranes without considerable decrease in their adsorption capacity. The desorption results showed that chromium ions could be more effectively removed at pH 2.0 than pH 6.0, mainly for ECH-crosslinked chitosan.     

Structural Performance of RC Beams Poststrengthened with Carbon, Aramid, and Glass FRP Systems

The use of fiber-reinforced polymers (FRPs) to poststrengthen concrete structures started to be investigated in the mid-1970s and today is widely recognized as an attractive technique to be used in civil structures, especially when aggressive environments prevent the use of materials that are susceptible to corrosion, such as steel. Different FRP poststrengthening techniques have been developed and applied in existing structures, aiming to increase their load capacity. Most FRP systems used nowadays consist of carbon fibers embedded in epoxy matrix. Regardless of the advantages and the good results achieved using carbon fiber-reinforced polymers, some new possibilities, such as the use of prestressing and lower cost fiber materials, are being analyzed in an attempt to provide viable alternatives for a more efficient, safe, and rational use of FRP systems. The main purpose of the present work was to make a comparative analysis of the behavior of reinforced concrete beams poststrengthened with carbon, aramid, and glass FRP subjected to static loading tests. Experimental results were evaluated against theoretical ones obtained through an analytical model that considers a trilinear behavior for the load versus displacement curves. The experimental results indicate that all FRP systems applied have appropriate structural performance for use in poststrengthening applications of RC. The choice of the more suitable system would, therefore, be strongly influenced by circumstances regarding cost limitations and level of reinforcement required.