Simple and high-throughput method for the multimycotoxin analysis in cereals and related foods by ultra-high performance liquid chromatography/tandem mass spectrometry

A rapid, reliable and sensitive method was developed to determine 12 mycotoxins (deoxynivalenol, aflatoxins B1, B2, G1, G2 and M1, fumonisins B1 and B2, ochratoxin A, HT-2 and T-2 toxin and zearalenone) simultaneously in maize, walnuts, biscuits and breakfast cereals. The method is based on a single extraction step using acetonitrile/water mixture (80/20 v/v) followed by ultra-high performance liquid chromatography coupled with tandem mass spectrometry (UHPLC–MS/MS). The selectivity of the MS/MS detection allowed the elimination of further clean up steps. Extraction, chromatographic and detection conditions were optimised in order to increase sample throughput and sensitivity. Matrix-matched calibration was used for quantification and recoveries of the extraction process ranged from 70.0% and 108.4%, with relative standard deviations lower than 25% in all the cases, when samples were fortified at 5 and 50 μg/kg. Limits of detection ranged from 0.01 to 2.1 μg/kg and limits of quantification ranged from 0.03 to 6.30 μg/kg, which were always below the tolerance levels of mycotoxins set by European Union in the matrices evaluated. Several samples were analysed and aflatoxins B1, B2, G1, G2 and T-2 toxin were detected in one maize sample, with concentrations lower than 6.0 μg/kg and deoxynivalenol was detected in a breakfast cereal at 42.1 μg/kg.     

Arsenic and selenium capture by fly ashes at low temperature

Arsenic and selenium compounds may be emitted to the environment during coal conversion processes, although some compounds are retained in the fly ashes, in different proportions depending on the characteristics of the ashes and process conditions. The possibility of optimizing the conditions to achieve better trace element retention appears to be an attractive, economical option for reducing toxic emissions. This approach requires a good knowledge of fly ash characteristics and a thorough understanding of the capture mechanism involved in the retention. In this work the ability of two fly ashes, one produced in pulverized coal combustion and the other in fluidized bed combustion, to retain arsenic and selenium compounds from the gas phase in coal combustion and coal gasification atmospheres was investigated. To explore the possible simultaneous retention of mercury, the influence of the unburned coal particle content was also evaluated. Retention capacities between 2 and 22 mg g(-1) were obtained under different conditions. The unburned coal particle content in the fly ash samples does not significantly modify retention capacities.     

Preparation and characterization of Co-Ru/TiO2/MWCNTs electrocatalysts in PEM hydrogen electrolyzer

The subject of this study is preparation and characterization of hypo-hyper d-electrocatalysts with reduced amount of precious metals aimed for water electrolysis. The studied electrocatalysts contain 10% mixed metallic phase (Co:Ru = 1:1 wt., Co:Ru = 4:1 wt. and Co:Ru:Pt = 4:0.5:0.5 wt.), 18% TiO₂ as a crystalline anatase deposited on multiwalled carbon nanotubes (MWCNTs). Previously, MWCNTs were activated in 28% nitric acid. As a reference electrocatalyst for hydrogen evolution reaction, corresponding electrocatalysts with pure Pt metallic phase and mixed CoPt (Co:Pt = 1:1 wt.) metallic phase were prepared. Also, as a reference electrocatalyst for oxygen evolution reaction, electrocatalyst with pure Ru metallic phase was prepared.The prepared electrocatalysts were structurally characterized by means of XPS, XRD, TEM, SEM and FTIR analysis.Electrochemical characterization was performed by means of cyclic voltammetry and potentiodynamic method in the PEM hydrogen electrolyzer. The range of the catalytic activity for hydrogen evolution of studied electrocatalysts was the following: CoRuPt (4:0.5:0.5) > CoPt (1:1) > Pt > CoRu (1:1) > CoRu (4:1). The order of the catalytic activity for oxygen evolution was the following: CoRu (1:1) > Ru > CoRu (4:1) > Pt > CoRuPt (4:0.5:0.5) > CoPt (1:1).     

Sound propagation through the wake flow of a hilltop wind turbine—A numerical study

The sound propagation from a wind turbine situated on the top of a hill into the downwind domain is studied by numerical simulations for 13 cases with varying hill geometry and inflow conditions. The influence of the hill on the atmospheric flow and the wake due to the rotor are simulated by precursory large‐eddy simulations. In addition to the combined consideration of hill and turbine wake effects, these effects are also separately evaluated. The results show that placing the turbine on top of a hill leads to slightly lower sound levels on the downwind plane, although the wake alone supports downward refraction and tends to increase the sound impact near the ground at greater distance. Variations of the hill geometry and the inflow conditions do not have significant effects on the near‐ground sound levels in the downwind domain.     

Determining suitable dimensions for dairy goat feeding places by evaluating body posture and feeding reach

Confined goats spend a substantial part of the day feeding. A poorly designed feeding place increases the risk of feeding in nonphysiological body postures, and even injury. Scientifically validated information on suitable dimensions of feeding places for loose-housed goats is almost absent from the literature. The aim of the present study was, therefore, to determine feeding place dimensions that would allow goats to feed in a species-appropriate, relaxed body posture. A total of 27 goats with a height at the withers of 62 to 80 cm were included in the study. Goats were tested individually in an experimental feeding stall that allowed the height difference between the feed table, the standing area of the forelegs, and a feeding area step (difference in height between forelegs and hind legs) to be varied. The goats accessed the feed table via a palisade feeding barrier. The feed table was equipped with recesses at varying distances to the feeding barrier (5–55 cm in 5-cm steps) at angles of 30°, 60°, 90°, 120°, or 150° (feeding angle), which were filled with the goats' preferred food. In 18 trials, balanced for order across animals, each animal underwent all possible combinations of feeding area step (3 levels: 0, 10, and 20 cm) and of difference in height between feed table and standing area of forelegs (6 levels: 0, 5, 10, 15, 20, and 25 cm). The minimum and maximum reach at which the animals could reach feed on the table with a relaxed body posture was determined for each combination. Statistical analysis was performed using mixed-effects models. The animals were able to feed with a relaxed posture when the feed table was at least 10 cm higher than the standing height of the goats' forelegs. Larger goats achieved smaller minimum reaches and minimum reach increased if the goats' head and neck were angled. Maximum reach increased with increasing height at withers and height of the feed table. The presence of a feeding area step had no influence on minimum and maximum reach. Based on these results, the goats' feeding place can be designed to ensure that the animals are able to reach all of the feed in the manger or on the feed table with a relaxed posture, thus avoiding injuries and nonphysiological stress on joints and hooves. A feeding area step up to a maximum of 20 cm need not be taken into account in terms of feeding reach. However, the feed table must be raised at least 10 cm above the standing area to allow the goats to feed in a species-appropriate, relaxed posture.     

Au-Sn SLID Bonding: A Reliable HT Interconnect and Die Attach Technology

Au-Sn solid–liquid interdiffusion (SLID) bonding is an established reliable high temperature (HT) die attach and interconnect technology. This article presents the life cycle of an optimized HT Au-Sn SLID bond, from fabrication, via thermal treatment, to mechanical rupture. The layered structure of a strong and uniform virgin bond was identified by X-ray diffraction to be Au/ζ (Au_0.85Sn_0.15)/Au. During HT exposure, it was transformed to Au/β (Au_1.8Sn_0.2)/Au. After HT exposure, the die shear strength was reduced by 50 pct, from 14 Pa to 70 MPa, which is still remarkably high. Fractographic studies revealed a change in fracture mode; it was changed from a combination of adhesive Au/Ni and cohesive SiC fracture to a cohesive β-phase fracture. Design rules for high quality Au-Sn SLID bonds are given.     

Influence of the Addition of a Second Metal on the Catalytic Performance of Pt-Beta Agglomerated Catalyst in the Hydroisomerization of n-Octane

In this work, the hydroisomerization of n-octane on mono and bimetallic beta agglomerated zeolite based catalysts was investigated. As the metal function, platinum and combinations with nickel and tin were studied. Test reactions were carried out at 10 bar and 290–410 °C. The bimetallic catalyst with the lowest amount of Ni yielded the greatest multibranched selectivity.