Tribological behaviour of a 3Y-TZP/Ta ceramic-metal biocomposite against ultrahigh molecular weight polyethylene (UHMWPE)

This study aims to evaluate the tribological behaviour of 3Y-TZP/Ta (20 vol%) ceramic-metal composites and 3Y-TZP monolithic ceramic prepared by spark plasma sintering (SPS) against ultrahigh molecular weight polyethylene (UHMWPE). According to the results of pin (UHMWPE)-on-flat wear test under dry conditions, the UHMWPE – 3Y-TZP/Ta system exhibited lower volume loss and friction coefficient than the UHMWPE – monolithic ceramic combination due to the presence of an autolubricating layer that provides sufficient lubrication for reducing the friction. Owing to the lubrication of the liquid media, under wet conditions obtained using simulated body fluid (SBF), similar behaviour is observed in both cases. Additionally, the ceramic and biocomposite materials were subjected to a low temperature degradation (LTD) process (often referred to as “ageing”) to evaluate the changes in the tribological behaviour after this treatment. In this particular case, the wear properties of the UHMWPE-biocomposite system were found to be less influenced by ageing in contrast to the case of the UHMWPE-zirconia monolithic material. In addition to their exceptional mechanical performance, 3Y-TZP/Ta composites also showed high resistance to low temperature degradation and good tribological properties, making them promising candidates for biomedical applications, especially for orthopaedic implants.     

Bibliometric analysis of the evolution of biochar research trends and scientific production

Clean Technologies and Environmental Policy - Biochar has caught great attention over the last decade, yielding a large number of publications in a broad range of disciplines. This scientometric...     

On the use of 2-D coding techniques for ECG signals.

This paper discusses the convenience of using two-dimensional (2-D) coding techniques for the compression of electrocardiogram (ECG) signals. These signals present a very clear periodicity that can be exploited by the use of a 2-D time/frequency transform to decorrelate it as much as possible. A brief theoretical approach is given to justify the use of this technique, and a comparison is made between a 2-D and a one-dimensional (1-D) uniform quantization scenarios. The influence of the error as well as the frame size on the estimation of the fundamental period is studied.     

Automatic fog detection and estimation of visibility distance through use of an onboard camera

In this paper, we will present a technique for measuring visibility distances under foggy weather conditions using a camera mounted onboard a moving vehicle. Our research has focused in particular on the problem of detecting daytime fog and estimating visibility distances; thanks to these efforts, an original method has been developed, tested and patented. The approach consists of dynamically implementing Koschmieder's law. Our method enables computing the meteorological visibility distance, a measure defined by the International Commission on Illumination (CIE) as the distance beyond which a black object of an appropriate dimension is perceived with a contrast of less than 5%. Our proposed solution is an original one, featuring the advantage of utilizing a single camera and necessitating the presence of just the road and sky in the scene. As opposed to other methods that require the explicit extraction of the road, this method offers fewer constraints by virtue of being applicable with no more than the extraction of a homogeneous surface containing a portion of the road and sky within the image. This image preprocessing also serves to identify the level of compatibility of the processed image with the set of Koschmieder's model hypotheses. Nicolas Hautiére graduated from the École Nationale des Travaux Publics de l'État, France (2002). He received his M.S. and Ph.D. degree in computer vision, respectively, in 2002 and 2005 from Saint-Étienne University (France). From 2002, he is a researcher in the Laboratoire Central des Ponts et Chaussées (LCPC), Paris, France. His research interests include trafic engineering, computer vision, and pattern recognition. Jean-Philippe Tarel graduated from the École Nationale des Ponts et Chaussées, Paris, France (1991). He received his Ph.D. degree in Applied Mathematics from Paris IX-Dauphine University in 1996 and he was with the Institut National de Recherche en Informatique et Automatique (INRIA) from 1991 to 1996. From 1997 to 1998, he was a research associate at Brown University, USA. From 1999, he is a researcher in the Laboratoire Central des Ponts et Chaussées (LCPC), Paris, France, and from 2001 to 2003 in the INRIA. His research interests include computer vision, pattern recognition, and shape modeling. Jean Lavenant graduated from the École Nationale des Travaux Publics de l'État, Lyon, France (2001). He received the M.S. degree in Computer Vision from Jean Monnet university of Saint-Étienne in 2001. In 2001, he was a researcher in the Laboratoire Central des Ponts et Chaussées (LCPC). In 2002, he was a system engineer in Chicago (USA). He is currently an engineer for the french ministry of transports. Didier Aubert received the M.S. and Ph.D. degree, respectively, in 1985 and 1989 from the National Polytechnical Institut of Grenoble (INPG). From 1989--1990, he worked as a research scientist on the development of an automatic road following system for the NAVLAB at Carnegie Mellon University. From 1990–1994, he worked in the research department of a private company (ITMI). During this period he was the project leader of several projects dealing with computer vision. He is currently a researcher at INRETS since 1995 and works on Road traffic measurements, crowd monitoring, automated highway systems, and driving assistance systems for vehicles. He is an image processing expert for several companies, teaches at Universities (Paris VI, Paris XI, ENPC, ENST) and is at the editorial board of RTS (Research - Transport - Safety).     

Vehicle detection by means of stereo vision-based obstacles features extraction and monocular pattern analysis.

This paper presents a stereo vision system for the detection and distance computation of a preceding vehicle. It is divided in two major steps. Initially, a stereo vision-based algorithm is used to extract relevant three-dimensional (3-D) features in the scene, these features are investigated further in order to select the ones that belong to vertical objects only and not to the road or background. These 3-D vertical features are then used as a starting point for preceding vehicle detection; by using a symmetry operator, a match against a simplified model of a rear vehicle's shape is performed using a monocular vision-based approach that allows the identification of a preceding vehicle. In addition, using the 3-D information previously extracted, an accurate distance computation is performed.     

Velocity selective filters recursively implemented in the spatiotemporal domain.

Energy-based methods for motion estimation in image sequences process the input data either in the spatiotemporal or in the frequency domain. In both cases, the algorithms already described in the literature often require a huge number of elementary operations. In this paper, we describe a class of velocity selective filters which yield an accurate detection of the edges moving in the sequence. We first present a filtering scheme based on a convolution operation computed on a finite size neighborhood and describe its properties in the spatiotemporal and frequency domains. Then, we show that filters with similar properties can be implemented recursively, i.e., as convolutions computed on infinite-size neighborhoods. As an example, we finally show the filters' responses in the case of two superimposed translational motions.     

Influence of thermal treatments on the elastic parameters in iron rich metallic glasses

The change of magnetoelastic properties after thermal treatments has been investigated for two groups of metallic glasses. (Fe₇₉Co₂₁)_75+xSi_15−1.4xB_10+0.4x (x (at.%)=0, 2, 4, 6, 8, 10) has been studied both in the as-prepared state and after thermal annealing in an applied magnetic field, to achieve a particular domain structure, at temperatures well below the crystallization temperatures. Changes in the ΔE effect, magnetomechanical coupling (k) and internal friction coefficient (Q⁻¹) are reported, reaching values of about 60% of the saturation value E_S. Fe₆₄Ni₁₀Nb₃Cu₁Si₁₃B₉ alloys annealed in vacuum for 1 h in the temperature range 350–550 °C showed maximum values of the ΔE effect and k of 61% and 0.85, respectively, accompanied by a minimum value of Q of around 2 for the sample annealed at 460 °C. These variations are related to the progress of nanocrystalization. The properties achieved are among the best reported for magnetomechanical applications.