A pilot level approach to remove anionic species from industrial effluents using a novel carbonate-steam pyrolysed activated charcoal system

In our laboratory, we synthesized a novel surface tailored activated charcoal in removing nitrite species from fertilizer industrial effluents. A customized high temperature carbonate-steam activation technique was adopted to develop the sodium carbonate impregnated activated charcoal (SCIAC). The surface properties of the material were determined using SEM, TG and X-RD techniques. Batch adsorption experiments were performed for optimizing various conditions such as solution pH, contact time, temperature and adsorbent dose for maximizing the nitrite adsorption onto SCIAC. Considerably, a very high nitrite adsorption percentage of 83.8 was obtained for an initial nitrite concentration of 5.0?mg/L at pH 3.0. Among the various equilibrium and kinetic models, Freundlich and pseudo-second-order expressions, respectively, were well enough to explain the adsorption processes. In general, it may conclude that the change in surface characteristics of the adsorbent material after the pyrolysis process is highly favorable for effective removal of nitrite ions from aqueous systems. Adsorption capacity of SCIAC was 27.03?mg/g and studies revealed that the material was feasible in removing nitrite from industrial effluents.     

Threshold Fluence Measurement for Laser Liftoff of InP Thin Films by Selective Absorption

We explore conditions for achieving laser liftoff in epitaxially grown heterojunctions, in which single crystal thin films can be separated from their growth substrates using a selectively absorbing buried intermediate layer. Because this highly non‐linear process is subject to a variety of process instabilities, it is essential to accurately characterize the parameters resulting in liftoff. Here, we present an InP/InGaAs/InP heterojunction as a model system for such characterization. We show separation of InP thin films from single crystal InP growth substrates, wherein a ≈10 ns, Nd:YAG laser pulse selectively heats a coherently strained, buried InGaAs layer. We develop a technique to measure liftoff threshold fluences within an inhomogeneous laser spatial profile, and apply this technique to determine threshold fluences of the order 0.5 J cm^?2 for our specimens. We find that the fluence at the InGaAs layer is limited by non‐linear absorption and InP surface damage at high powers, and measure the energy transmission in an InP substrate from 0 to 8 J cm^?2. Characterization of the ejected thin films shows crack‐free, single crystal InP. Finally, we present evidence that the hot InGaAs initiates a liquid phase front that travels into the InP substrate during liftoff.

     

Synthesis and characterization of cobalt ferrocyanides loaded on organic anion exchanger

Transition metal ferrocyanides have important applications in the selective removal of radioactive caesium from low level and intermediate level radioactive liquid waste streams. The microcrystalline nature of these materials renders them useless for application in column mode operations. Special preparation procedures have been developed to prepare granular solids by in situ precipitation of metal ferrocyanides on organic anion exchangers, which is suitable for column mode operations. The elemental compositions of the metal ferrocyanides precipitated inside the pores of anion exchanger were determined by analysing the dissolved samples using ICP-AES system and flame photometer. From the XRD and EDX analyses and the elemental composition of the synthesized materials, the nature of the compound formed inside the anion exchanger was found to be cobalt ferrocyanide. From SEM analysis of the samples, the particle size of the cobalt ferrocyanide precipitated inside the anion exchanger was found to be much less than that of cobalt ferrocyanide precipitated outside. The efficiency of these materials for removal of Cs was evaluated by measuring the distribution coefficient (Kd), ion exchange capacity and kinetics of Cs uptake. The Kd of the materials loaded on anion exchanger was found to be of the order of 10⁵ ml/g. The Cs uptake kinetics of the materials loaded on anion exchanger was slower than that of precipitated materials. The ion exchange capacity of the cobalt ferrocyanide loaded on anion exchanger was found to be much higher than that of the precipitated cobalt ferrocyanide.     

Review of Generalized anxiety disorder: From science to practice.

Reviews the book, Generalized anxiety disorder: From science to practice by Michel J. Dugas and Melisa Robichaud (2006). The reviewers commend the authors for providing a comprehensive overview of GAD. Chapters include information on diagnosis, assessment techniques and treatment modules. Dugas and Robichaud refer to their treatment as primarily cognitive and emphasize the difference between their approach and other cognitive and cognitive-behavioural treatments for GAD. The treatment presented does not employ relaxation training or other strategies to reduce physical tension and overarousal. Rather, this treatment makes use of specific cognitive interventions with the understanding that physical and affective symptoms will decrease with corresponding reductions in excessive worry. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Noninvasive measurement of the pH of the endoplasmic reticulum at rest and during calcium release

The pH within individual organelles of the secretory pathway is believed to be an important determinant of their biosynthetic activity. However, little is known about the determinants and regulation of the pH in the secretory organelles, which cannot be readily accessed by [H+]-sensitive probes. We devised a procedure for the dynamic, noninvasive measurement of pH in the lumen of the endoplasmic reticulum in intact mammalian cells. A recombinant form of the B subunit of Shiga toxin, previously modified to include a carboxyl-terminal KDEL sequence and a pH-sensitive fluorophore, was used for a two-stage delivery strategy. Retrograde traffic of endogenous lipids was harnessed to target this protein to the Golgi complex, followed by retrieval to the endoplasmic reticulum (ER) by KDEL receptors. Immunofluorescence and immunoelectron microscopy were used to verify the subcellular localization of the modified B fragment. Fluorescence ratio imaging and two independent calibration procedures were applied to determine the pH of the ER in situ. We found that the pH of the endoplasmic reticulum is near neutral and is unaffected during agonist-induced release of calcium. The ER was found to be highly permeable to H+ (equivalents), so that the prevailing [H+] is susceptible to alterations in the cytosolic pH. Plasmalemmal acid-base transporters were shown to indirectly regulate the endoplasmic reticulum pH.     

Direct Assessments of the Processing Time Hypothesis for the Missing-Letter Effect.

When participants search for a target letter while reading, they make more omissions if the target letter is embedded in frequently used words or in the most frequent meaning of a polysemic word. According to the processing time hypothesis, this occurs because familiar words and meanings are identified faster, leaving less time for letter identification. Contrary to the predictions of the processing time hypothesis, with a rapid serial visual presentation procedure, participants were slower at detecting target letters for more frequent words or the most frequent meaning of a word (Experiments 1 and 2) or at detecting the word itself instead of a target letter (Experiment 3). In Experiments 4 and 5, participants self-initiated the presentation of each word, and the same pattern of results was observed as in Experiments 1 and 3. Positive correlations were also found between omission rate and response latencies. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Design for Six Sigma

The concept of implementation of Six Sigma methodology was pioneered at Motorola in the 1980s with the aim of reducing quality costs. Six Sigma methodology has evolved into a statistically oriented approach to process, product or service quality improvement. It is a business performance improvement strategy used to improve profitability, to drive out waste in business processes and to improve the efficiency of all operations that meet or exceed customers' needs and expectations. A performance level of Six Sigma equates to 3-4 defects per million opportunities, where sigma is a statistical measure of the amount of variation around the process average. The average sigma level for most companies is three sigma. The authors offer guidance as to how companies may achieve Six Sigma performance. Organisations that have adopted the principles and concepts of Six Sigma methodology have realised that once they have achieved Five Sigma quality levels the only way to surpass the Five Sigma quality level is to redesign their products, processes and services from scratch. These circumstances have led to the development of what we call today 'design for Six Sigma'. Design for Six Sigma is a powerful approach to designing products, processes and services in a cost-effective and simple manner, to meet the needs and expectations of the customer     

Minimal schedulability interval for real-time systems of periodic tasks with offsets

We consider real-time systems in highly safety context where tasks have to meet strict deadlines. Tasks are periodic, may have offsets, share critical resources and be precedence constrained. Off-line scheduling should be of great help for such systems, but methods proposed in the literature cannot deal with them. Our aim is to extend and improve the well-known cyclicity result of Leung and Merill to every scheduling algorithm and to systems of interacting tasks with offsets. One of the main benefit of our result is to enable the use of off-line scheduling methods for those real-time critical systems.     

Processes for production of high-purity metal powders

Production of high-quality metal powders is becoming important to meet the increasing demand for manufacturing advanced materials. A number of standard powder production techniques have been developed to meet the increasing demand for high-purity metal powders. This paper discusses the different techniques of producing metal powder.     

A Novel Synthesis,Structural, Morphological,and Opto-magnetic Characterizations of Magnetically Separable Spinel Co x Mn1−x Fe2O4 (0 ≤ x ≤ 1) Nano-catalysts

Spinel Co _x Mn_1?x Fe₂O₄ (0≤x≤1) nano- crystals were successfully synthesized by a simple microwave-assisted combustion method. High-resolution scanning electron microscopy (HR-SEM) and transmission electron microscopy (HR-TEM) analysis was used to study the morphological variations and found the particle-like nanocrystal morphologies. Energy dispersive X-ray (EDX) results showed that the composition of the elements were relevant as expected from the combustion synthesis. Powder X-ray diffraction (XRD) analysis showed that all composition was found to have cubic spinel-type structure. Average crystallite size of the samples was found to be in the range of 10.36–21.16 nm. The lattice parameter decreased from 8.478 to 8.432 Å with increasing Co²⁺ content. Fourier transform infrared (FT-IR) spectra showed two strong absorption peaks observed at lower frequency (～435 to ～800 cm^?1), which can be assigned to the M–O (Mn, Co, and Fe) bonds. UV-Visible diffuse reflectance spectroscopy (DRS) shows that the energy band gap of pure MnFe₂O₄ is 1.78 eV and with increase in the Co²⁺ ion, it increases from 1.87 to 2.33 eV. Addition of Co²⁺ in MnFe₂O₄ reduces the particle size, which can be confirmed by the blue shift in the photoluminescence (PL) spectra. Vibrating sample magnetometer (VSM) results that confirmed a weak ferromagnetic behavior for all composition with saturation magnetization values in the range of 50.05 ±04 to 67.09 °03 emu/g. All composition of spinel Co _x Mn_1?x Fe₂O₄ nano-crystals were successfully tested as catalyst for the oxidation of benzyl alcohol to benzaldehyde, which has resulted 87.32 and 94.28 % conversion efficiency of MnFe₂O₄ and Co_0.6Mn_0.4Fe₂O₄, respectively.