Fabricating high performance a-Si solar cells by alternately repeating deposition and hydrogen plasma treatment method

The performance of a p-i buffer layer in pin amorphous silicon solar cell was improved by the “alternately repeating deposition and hydrogen plasma treatment method (ADHT)”. The optical bandgap of the a-Si film was increased by hydrogen plasma treatement. The wide optical bandgap and the high photoconductive a-Si:H films without carbon could be fabricated by the ADHT method. The conversion efficiency of the solar cell with a-Si:H buffer layer was almost the same as that using an a-SiC:H buffer layer. Second, the a-Si (ADHT) films were applied to the n-i buffer layer. The insertion of a-Si (ADHT) films between the i-layer and the n-layer was effective to improve the cell performance, especially the fill factor. With the use of high performance a-Si p-i and n-i buffer layer deposited by ADHT method, a cell conversion efficiency of 12.9% was obtained.     

Fin efficiency of serrated fins. Part 4. Correction factor for inline arrangement

A correction factor to the theoretical fin efficiency of serrated fins, reported in Part 1 and Part 2 of this report, was derived for an inline arrangement experimentally. The experiment was performed using an open‐type wind tunnel with six kinds of test finned‐tubes made of copper, carbon steel and stainless steel, which were arranged in one to five rows. Heat transfer measurement was done by the local thermal simulation method. The derived correction factor for the 1st row was the same as for staggered arrangement reported in Part 3, for the 2nd and deeper rows, however, a further correction was needed, which may be caused by the difference in the nonuniformity in heat transfer coefficient over the fin surface. © 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(4): 258–269, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20008     

Liquid lens using acoustic radiation force

A liquid lens is proposed that uses acoustic radiation force with no mechanical moving parts. It consists of a cylindrical acrylic cell filled with two immiscible liquids (degassed water and silicone oil) and a concave ultrasound transducer. The focal point of the transducer is located on the oil-water interface, which functions as a lens. The acoustic radiation force is generated when there is a difference in the acoustic energy densities of different media. An acoustic standing wave was generated in the axial direction of the lens and the variation of the shape of the oil-water interface was observed by optical coherence tomography (OCT). The lens profile can be rapidly changed by varying the acoustic radiation force from the transducer. The kinematic viscosity of silicone oil was optimized to minimize the response times of the lens. Response times of 40 and 80 ms when switching ultrasonic radiation on and off were obtained with a kinematic viscosity of 200 cSt. The path of a laser beam transmitted through the lens was calculated by ray-tracing simulations based on the experimental results obtained by OCT. The transmitted laser beam could be focused by applying an input voltage. The liquid lens could be operated as a variable-focus lens by varying the input voltage.     

Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system

We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density (<10⁻⁵ A/cm² at −2 V bias voltage) and photocurrent density (>5 × 10⁻³ A/cm² at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.     

Design and performance evaluation of amplifier modules in stackable ROADMs for low-cost CWDM access networks

Coarse wavelength division multiplexing (CWDM) network has proven to be promising lower cost network architecture for a significant cost advantage over dense wavelength division multiplexing due to the lower cost of lasers and the filters used in CWDM modules. A compatible amplifier module having bidirectional amplification capability was deployed for introducing inside stackable reconfigurable optical add/drop multiplexers in realizing large-scale CWDM networks. The amplifier module for use in the bidirectional IP transmission confirmed that the insertion losses of the nodes and the losses of the fibers connecting the nodes can be compensated effectively, allowing the network administrator to increase the number of nodes and fiber length of the network. However, the noise generated from the amplification due to amplified spontaneous emission must be considered in network design issues. In this paper, optical power penalties due to the bidirectional amplification were estimated by conducting experimentation on minimum detectable power of optical transceivers. After analyzing the power penalty issue, an IP-over-CWDM ring network was implemented and the performance of network was evaluated by monitoring the power and packet transmissions before and after the amplifier module was turned on.     

Bradykinin stimulates type II alveolar cells to release neutrophil and monocyte chemotactic activity and inflammatory cytokines

In the present study, we evaluated the potential of bradykinin (BK) to induce the release of neutrophil and monocyte chemotactic activity (NCA and MCA) and cytokines from an alveolar type II epithelial cell line, A549 cells. BK stimulated A549 cells to release NCA and MCA in a dose- and time-dependent manner (P < 0.001). Checkerboard analysis revealed that both NCA and MCA involved chemotactic and chemokinetic activity. Molecular sieve column chromatography showed three molecular weight masses (near 19 kd, 8 kd, and 400 d) for NCA and several molecular weight peaks (near 66 kd, 25 kd, 19 kd, 16 kd, and 400 d) for MCA. The release of NCA and MCA was inhibited by cycloheximide and lipoxygenase inhibitors (P < 0.01). The NCA and MCA were inhibited by leukotriene B4 (LTB4) receptor antagonist (P < 0.01), and the concentration of LTB4 was high enough for NCA and MCA. Antibodies to interleukin (IL)-8 and granulocyte colony-stimulating factor (G-CSF) attenuated NCA (P < 0.01), and antibodies to monocyte chemotactic protein-1 (MCP-1), G-CSF, and transforming growth factor (TGF)-beta attenuated MCA (P < 0.01). The levels of IL-8, G-CSF, MCP-1, and TGF-beta increased time dependently (P < 0.01). BK also stimulated the release of ILeukin-6 from A549 cells (P < 0.001). The receptors responsible for the release of NCA, MCA, and individual chemokines involved both BKB1 and BKB2 receptors. These data suggest that BK may stimulate alveolar type II pneumocytes to release inflammatory cytokines, which then may modulate the lung inflammation.     

EM574, an erythromycin derivative, is a potent motilin receptor agonist in human gastric antrum

Erythromycin and its derivatives are known to induce phase III-like contractions, which are similar to those induced by motilin, in the human gastrointestinal tract during the interdigestive state, but few detailed in vitro studies have been reported. We evaluated EM574, an erythromycin derivative, as a motilin receptor agonist in the human gastric antrum in vitro, using contraction studies of muscle strips and isolated myocytes, receptor binding assay and tissue section autoradiography. EM574 stimulated contractions of muscle strips in a concentration-dependent manner (10(-7)-10(-5) M), and this contractile effect was unaffected by pretreatment with atropine or tetrodotoxin. Isolated myocytes contracted in response to EM574 with a peak shortening at 10(-7) M, which was comparable to the response to motilin. EM574 displaced specifically 125I-motilin bound to smooth muscle homogenates with a Kd value of 7.8 x 10(-9) M, compared with 4.5 x 10(-9) M for motilin. Film autoradiograms showed that 125I-motilin-binding sites were localized in the muscle layers, and that the labeling disappeared in the presence of a 1000 times molar concentration of EM574. We conclude that EM574 directly stimulates smooth muscle cell contraction by acting on motilin receptors in the human gastric antrum in vitro.     

Early hemodynamic effects of olprinone hydrochloride after coronary artery bypass grafting

Our purpose was to evaluate the hemodynamic effects of olprinone hydrochloride early after coronary artery bypass grafting (CABG). Fifteen patients undergoing CABG were administered a constant infusion of 0.1 microgram/kg/min of olprinone and continued for 4 hours. No bolus infusion of olprinone was administered before continuous infusion. Systolic systemic arterial pressure, systolic pulmonary arterial pressure, systemic vascular resistance and pulmonary vascular resistance were significantly decreased. There were no significant changes in heart rate, mean central venous pressure, mean left atrial pressure and left ventricular stroke work index. Cardiac index was significantly increased, but a correlation between cardiac index and mixed venous blood oxygen saturation was not found. Double product was significantly decreased, which described above suggest that olprinone achieved improvement of left cardiac function without more myocardial oxygen consumption. Severe transient hypotension (systolic arterial pressure < 80 mmHg) after infusion of olprinone was observed in three patients. Olprinone administered soon after CABG surgery had beneficial effects in terms of improvement of hemodynamic status without more oxygen consumption and reduction of pulmonary vascular resistance. However transient hypotension was a serious clinical problem in patients after open heart surgery, especially in CABG patients who need suitable systolic arterial pressure to keep enough blood perfusion of arterial bypass grafts.