Proposal of Service CAD System - A Tool for Service Engineering -

To solve current industrial problems, manufacturers need to supply service rather than materialized products to consumers. We propose a novel engineering paradigm to deal with services, service engineering. We define services as a state change. A service model consists of three sub-models: scope model, view model and flow model. A computer-aided design tool, called Service Explorer, is developed to represent a network of the parameters and determines the influence weight one another. As the result, we verify the usefulness of the design tool.     

Carbonization and graphitization of poly-p-phenylene sulphide (PPS) film

Oriented poly-p-phenylene sulphide (PPS) films (thickness 12 and 75 m) and PPS powder were carbonized/graphitized after stabilizing by oxidation, in order to examine the effect of sulphur on graphitizability of the resulting carbons. The films and the powder resulted in carbons with a high and a low graphitizability respectively. An in-plane oriented structure of the PPS film was the most predominant factor to lead to a high graphitizability, and sulphur in the precursor did not lower the graphitizability when it was subjected to solid-phase carbonization. These phenomena are discussed on the basis of analytical data.     

Modified Bagolini striated glass test: clinical applications of starlight test in binocular visual field screening

AIM: To introduce the "starlight" test which was devised to check binocular vision in normal conditions of seeing in a rapid, easy, and cost effective manner and to estimate the possibility of its clinical use in screening the binocular visual field of patients. METHOD: The Bagolini striated glass test consists of optically plano lenses with imperceptible parallel scratches that barely blur the environment but produce two perpendicular luminous stripes (right eye stripe of 45 degrees and left eye stripe of 135 degrees) when subjects with normal binocular vision view one light source. Unlike the original Bagolini test, the starlight test uses three light sources in horizontal or vertical lines according to the testing purposes and the subject is asked to fixate upon the centre light. Through Bagolini glasses, the subject observes the resulting grid-like pattern and the state of binocular visual field of the subject can be roughly estimated. RESULTS: Normal subjects and patients with strabismus, visual field loss from intracranial diseases, glaucoma, retinitis pigmentosa, and functional visual loss were examined using the starlight test and findings from each case were discussed. CONCLUSIONS: The starlight test, which was made by hand at a low cost, is a simple test that can be used clinically. It provides information about the state of binocular vision of patients in normal conditions of seeing. It is also useful because it enables the examiner to share similar experiences with the examinee. The results suggest it can be effective in visual field screening.     

Superconductivity and spin correlation study by Fe3+ - ESR in (La1−xSrx)2Cu1−yFeyO4−z

Fe³⁺-ESR measurements are carried out for the samples of (La_1–xSr_x)₂Cu_1–yFe_yO_4–z. Peak-peak width H_pp of the signals decreases with falling temperature until minimum value and rises sharply with further decreasing temperature, which is approximated by H_pp = C₀ +C₁/T + BT. The H_pp behavior at high temperature and at low temperature can be analyzed by Korringa mechanism and slowing down of Fe₃₊ spin fluctuation, respectively. From the analysis of coefficient B's of Korringa terms, C₀ and g-shift, it is revealed that the magnetic interaction of Fe³⁺ with hole carriers and Ce²⁺ spins depends strongly on hole density.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Fabrication of micro-gelatin fiber utilizing coacervation method

Biotechnology has drastically been advanced by the development of iPS and ES cells, which are representative forms induced pluripotent stem cells. In the micro/nano bio field, the development of cells and Taylor-made medicine for a potential treatment of incurable diseases has been a center of attention. The melting point of gelatin is between 25 and 33 °C, and the sol–gel transition occurs in low temperature. This makes the deformation of this useful biomaterial easy. The examples of gelatin fiber applications are suture threads, blood vessel prosthesis, cell-growth-based materials, filter materials, and many others. Because the cell size differs depending on the species and applications, it is essential to fabricate gelatin fibers of different diameters. In this paper, we have developed a fabrication method for gelatin fibers the coacervation method. We fabricated narrow gelatin fibers having a diameter over 10 μm.     

A novel method for measuring direct compressive properties of carbon fibres using a micro-mechanical compression tester

A novel method has been developed for measuring direct compressive properties such as strength and elasticity of a series of mesophase-pitch-based and PAN-based carbon fibres about 10 m in diameter by uniaxial and transverse compression tests using a micromechanical tester. The fibres were shaped into cylindrical specimens, with their size ratio of length to diameter kept at about 2 to 3, by separating them from a thin film made by polishing the cut faces of a strand of carbon fibres with epoxy resin as a matrix. Individual cylindrical specimens were stood up or laid down on a glass plate without any fixer for the measurements of axial and transverse compression properties of fibres, respectively. The fibres exhibited non-linear elasticity, with the compressive modulus decreasing with compressive deformation. The direct axial compressive strengths of pitch-based carbon fibres were found to be marginally lower than the indirect ones, whereas there was no significant difference between the two strength values for PAN-based fibres. The pitch-based fibres exhibited smaller average values of axial compressive strength than the PAN-based fibres. The transverse compressive strength, which decreases with an increase in elasticity of carbon fibres, exhibited a considerably lower average value than that of the axial compressive strength. Further, the axial compressive strength was found to be smaller than the direct tensile strength for the fibres.     

Surface modification of biodegradable plastics by ion beams

Biodegradable plastics can be used as conventional plastics, while on disposal they decompose to water and carbon dioxide by microorganisms existing in natural environment. Products using biodegradable plastics have recently been developed in many companies pursuing ecology. In this study, surface modification of biodegradable plastics was carried out by inert ion beams for improvement of photo deterioration under an ultraviolet ray. The hardness of biodegradable plastics tended generally to decrease with irradiation of an ultraviolet ray. In this method, the hardness of ion-bombarded biodegradable plastics was kept at an initial value under an ultraviolet ray, because the modified layer by ion bombardment intercepted an ultraviolet ray. The hardness of He⁺ ion-bombarded biodegradable plastics showed larger value than that of Ar⁺ ion bombardment. He⁺ ion bombardment at ion energy of 10 keV produced the suitable property with both of high transmittance of a visible ray and high interception of an ultraviolet ray in a surface layer of biodegradable plastics.     

Growth and structure of heteroepitaxial thin films of homologous compounds RAO3(MO)m by reactive solid-phase epitaxy: Applicability to a variety of materials and epitaxial template layers

A reactive solid-phase epitaxy (R-SPE) method combines deposition of a thick amorphous or polycrystalline layer with a desired chemical composition and post-deposition solid-phase epitaxial growth. The solid-phase epitaxial growth is invoked by thermal annealing with an assistance of a sacrificial layer working as an epitaxial template. Thereby it enables us to grow high-quality epitaxial films of complex oxides whose epitaxial films are not grown by conventional high-temperature growth techniques. It was reported that 2-nm-thick ZnO layers worked as template for growing InGaO₃(ZnO)_m (m = integer) epitaxial films. The present study extended the R-SPE technique to growth of various complex oxides with chemical compositions of RAO₃(MO)_m and to use of various epitaxial template layers. We found that mono oxide epitaxial layers such as In₂O₃ and Ga₂O₃ work as template layers as well. Alternatively, a ZnO epitaxial layer is also applicable to ZnO-free compounds. The films obtained were grown heteroepitaxially on YSZ(111) and single-crystalline when the fabrication conditions are optimized.     

Multirobot motion coordination in space and time

This paper describes a solution to the multirobot motion planning problem based on a decoupled analysis in the space domain and in the time domain. It investigates the practical use of the notion of motion plan quality and of the motion plan robustness measures for computing safe motions. The use of anytime algorithms allows one to evaluate the opportunity of looking for alternative solution paths by generating small variations of robot motions affecting both its geometrical path and its scheduled velocity. By using the concept of plan robustness, several alternative paths are generated and evaluated through various performance indices and impact factors, using heuristic rules. These indices allow one to know how much a variation affects a given plan. Finally, some recent experiments are outlined.