Deformability enhancement in ultra-fine grained, Ar-contained W compacts by TiC additions up to 1.1%

Nano-sized Ar bubbles give negative influence on the fracture resistance and occurrence of superplasticity in ultra-fine grained (UFG) W–TiC compacts. In order to enhance deformability in UFG, Ar-contained W–TiC compacts, effects of TiC addition on the high-temperature deformation behavior were examined. W–TiC compacts with TiC additions of 0, 0.25, 0.5, 0.8 and 1.1 wt% were fabricated by mechanical alloying in a purified Ar atmosphere and hot isostatic pressing. Tensile tests were conducted at 1673–1973 K (0.45–0.54 T_m, T_m: melting point of W) at initial strain rates from 5 × 10⁻⁵ to 5 × 10⁻³ s⁻¹. It is found that as TiC addition increases, the elongation to fracture significantly increases, e.g., from 3 to 7% for W–0 and 0.25TiC/Ar to above 160% for W–1.1TiC/Ar when tested at 1873 and 1973 K at 5 × 10⁻⁴ s⁻¹. The flow stress takes a peak at 0.25%TiC and decreases to a nearly constant level at 0.5–1.1%TiC. The ranges of the strain rate sensitivity of flow stress, m, and the activation energy for deformation, Q, with TiC additions are 0.17–0.30 and 310–600 kJ/mol, respectively. The observed effects of the TiC additions on the tensile properties are discussed.     

CMAP: a novel cystatin-like gene involved in liver metastasis

The distribution and ultrastructure of class II major histocompatibility complex (MHC)-positive cells were investigated in human dental pulp, employing immunohistochemistry using an anti-human leukocyte antigen (HLA)-DR-monoclonal antibody. HLA-DR-immunopositive cells, appearing spindle-like or dendritic in profile, were densely distributed throughout the dental pulp. Under the electron microscope, these cells exhibited various sizes of vesicles containing clear or opaque contents, multivesicular bodies and characteristic fine tubulovesicular structures in their cytoplasm. Some reactive cells possessed coated pits and vesicles including electron-dense materials, indicating an active endocytosis. At the periphery of the pulp tissue, the HLA-DR-immunopositive cells were predominantly situated in the subodontoblastic layer, with some located in the odontoblast layer and/or predentin and extending their cytoplasmic processes into the dentinal tubules. Cell processes of these cells occasionally made contact with several odontoblast processes in the same way as the nerve fibers in the predentin. These cells never contained the typical phagosomes frequently observed in the HLA-DR-immunoreactive macrophages in the subodontoblastic layer and the pulp core. The results suggest that the HLA-DR-immunopositive cells in the odontoblast layer and/or predentin have some regulatory function on the odontoblasts under physiological conditions, in addition to their involvement in the initial defense reaction after tooth injury.     

Atomic force microscopy of histological sections using a new electron beam etching method

In order to examine histological sections of the rat vomeronasal epithelium with the atomic force microscope (AFM), we developed an electron beam etching method that improves the resolution of AFM images. This method results in AFM images comparable to those obtained with the transmission electron microscope (TEM). Ultrathin tissue sections embedded in epoxy resin were observed before and after the treatment with electron beam radiation. Before electron beam treatment, epithelial structures such as the microvilli surface, dendritic processes, the supporting cell layers and the neuronal cell layers were all visible using the AFM. However, only a few subcellular structures could also be resolved. The AFM images were not as clear as those obtained with the TEM. After electron beam treatment, however, the resolution of AFM images was greatly improved. Most of the subcellular structures observed in TEM images, including the inner membrane of mitochondria, ciliary-structure precursor body, junctional complexes between the neurons and supporting cells, and individual microvilli were now visible in the AFM images. The electron beam treatment appeared to melt the embedding resin, bringing subcellular structures into high relief. The result of this study suggests that electron beam etching of histological samples may provide a new method for the study of subcellular structure using the AFM.     

Enhanced stability of recombinant keratinocyte growth factor by mutagenesis

Native sequence keratinocyte growth factor (KGF) is fairly unstable, as manifested by the loss of the monomeric native protein accompanied by the accumulation of aggregated species during storage at moderate temperatures. Several different types of analogs were generated and the storage stability of the protein assessed. In the first type of analog one or more of the five cysteinyl residues in KGF were replaced; in the second class the N-terminal residues that included the first disulfide bond were deleted. Both of these types of analogs involved removal of the disulfide bond between cysteines 1 and 15. The third group involved mutating one of the basic amino acids located in a cluster of positive charges (involved in heparin binding) around Arg144 to a neutral or acidic amino acyl residue. Among the cysteine replacement analogs, the double mutation of Cys1 and 15 to Ser resulted in significantly increased stability without compromising the mitogenic activity, while Cys to Ser mutations at other positions were either destabilizing or had no effect. Deletion of the 15, 23 or 27 N-terminal amino acyl residues also increased the stability of the protein. The activity of the analogs was not affected by the deletion of 15 or 23 amino acids, but it was significantly decreased upon removal of the 27 N-terminal amino acyl residues. Much greater stability was achieved by mutation of the basic amino acids, especially Arg144, to Glu or Gln, but this increase in stability was accompanied by large decrease in activity. The analog with the 23 N-terminal amino acyl residues deleted represents one of the best compromises between increased stability and retention of activity.     

Enhancement of melt elasticity for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) by addition of weak gel

Rheological properties in a molten state are studied extensively for poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), PHB‐HV, with a small amount of crosslinked poly(epichlorohydrin), PECH, having low density of crosslink points. It is found that adding 2 wt % of xPECH greatly enhances the melt elasticity of PHB‐HV, one of the serious defects of microbial PHB, whereas it has no effect on the shear viscosity. As a result, viscoelastic nature, and thus processability, of PHB‐HV can be controlled by blending the crosslinked PECH. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Layer-by-layer self-assembled mutilayer films of gold nanoparticles for surface-assisted laser desorption/ionization mass spectrometry

Layer-by-layer (LBL) self-assembled multilayer films of gold nanoparticles (AuNPs) on a silicon wafer were demonstrated to be promising substrates for surface-assisted laser desorption/ionization (SALDI) mass spectrometry (MS) of peptides and environmental pollutants for the first time. LBL multilayer films, (AuNPs/PAHC)n, consisting of alternating layers of ammonium citrate capped AuNPs and poly(allylamine hydrochloride) (PAHC) were prepared on a silicon surface. Silicon plates with aggregated AuNPs were more suitable than those with dispersed AuNPs for the SALDI-MS of peptides. The number of particle layers had a significant effect on the laser desorption/ionization of angiotensin I; the peak intensity of the peptide (molecular ion amount) increased with an increase in the number of layers of AuNPs. As a result, the (AuNPs/PAHC)5 multilayer films increased the sensitivity of the angiotensin I to subfemtomoles and raised the useful analyte mass range, thus making it possible to detect small proteins (a 12 kDa cytochrome c). The signal enhancement when using (AuNPs/PAHC)5 may be due to (i) the high absorption of the UV laser light at 337 nm by the AuNP layers, (ii) the low thermal conductivity due to the AuNPs being covered with a thin monolayer of PAHC, and (iii) the increase in the surface roughness (approximately 100 nm) with the number of AuNP layers. Thus, laser-induced rapid high heating of AuNPs for effective desorption/ionization of peptides is possible. In addition, it was found that (AuNPs/PAHC)5 could be used to extract environmental pollutants (pyrene and dimethyldistearylammonium chloride) from very dilute aqueous solutions with concentrations less than 10(-10) mg/mL, and the analytes trapped in the LBL film could be identified by introducing the film directly into the SALDI mass spectrometer without needing to elute the analytes out of the film.     

Growth of InGaN self-assembled quantum dots and their applicationto lasers

We have successfully grown InGaN self assembled quantum dots (QD's) on a GaN layer, using atmospheric-pressure metalorganic chemical vapor deposition (MOCVD). The average diameter of the QD's was as small as 8.4 nm, and strong emission from the QD's was observed at room temperature. Next, we have investigated a structure in which InGaN QD's were stacked to increase the total QD density. InGaN QD's were formed even when the number of stacked layers was ten. As the number of layers increased, the photoluminescence (PL) intensity increased drastically. Moreover, we have fabricated a laser structure with InGaN QD's embedded into the active layer. A clear threshold of 6.0 mJ/cm² was observed in the dependence of the emission intensity on the excitation energy at room temperature under optical excitation. Above the threshold, the emission was strongly polarized in the transverse electric (TE) mode, and the linewidth of the emission spectra was reduced to below 0.1 nm (resolution limit). The peak wavelength was around 405 nm. These results indicate lasing action at room temperature     

Technology interaction of Electrical Engineering

The paper reviews the global activities of the Technical Committee for History of Electrical Engineering (HEE) in Institute of Electrical Engineers of Japan (IEEJ) to discuss its future activities. Introducing HEE global activities in the Maui Meeting (MM) and International Conference on Electrical Engineering (ICEE), the paper discusses the framework of the International Joint Study Programme for History of Technology Interaction (IJSP/HTI) on the basis of its current study conducted by the Investigation Committee for International Joint Study for History of Technology Interaction (IC/HTI). It concludes the discussion with the view that the study of history could serve as a foundation for us to achieve global contributions in the field of engineering as well. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.