Antioxidative Effect of Seaweed Extracts in Chilled Storage of Minced Atlantic Mackerel (<Emphasis Type="Italic">Scomber scombrus</Emphasis>): Effect on Lipid and Protein Oxidation

In this study, antioxidant activity of absolute ethanol, 50 % ethanol and water extracts of two species of seaweeds namely, Fucus serratus and Polysiphonia fucoides were evaluated for their ability to retard lipid and protein oxidation in minced mackerel. Mackerel mince added with 0.5 g/kg of extracts was prepared. For comparison, BHT at 0.2 g/kg and a control with no added extracts were also prepared. The samples were stored at 5 °C for 8 days, and sampling was done at time 0, 1, 2, 4, 5 and 8 days. The 50 % ethanolic extracts of P. fucoides were found to be very effective in retarding lipid and protein oxidation, as it resulted in low levels of peroxide value, volatiles and carbonyl compounds and protected against the loss of α-tocopherol and tryptophan residues. In spite of the higher phenolic content, the absolute ethanol extracts of both species showed a pro-oxidative tendency in minced mackerel. Water extract with lowest phenolic content showed no antioxidant effect in minced mackerel. In conclusion, the 50 % ethanolic extracts of P. fucoides can be a potential source of natural antioxidants, as these extracts have antioxidant activities similar to synthetic antioxidants such as BHT. However, the extent of protection offered by these extracts against protein oxidation was not clear and further studies are needed to understand the nature of the interaction between proteins and these extracts.     

Aluminum control of phosphorus sorption by lake sediments

Release of reactive (phosphate-like) phosphorus (P) from freshwater sediments represents a significant internal P source for many lakes. Hypolimnetic P release occurs under reducing conditions that cause reductive dissolution of ferric hydroxide [Fe(OH)3]. This hypolimnetic P release may be naturally low or artificially reduced by sediment with naturally high or artificially elevated concentrations of aluminum hydroxide [Al(OH)3]. We presentfield and laboratory data for a common extraction analysis of sediments from 43 lakes differing in trophic status, pH regime, climate, and P loading. The results indicate that a simple sequential extraction of sediment may be a useful predictor of sediment's ability to release P. Sequential extractions of sediment P, Al, and Fe by water (H2O), bicarbonate-dithionite (BD), and NaOH (at 25 degrees C) showed that negligible amounts of P would be released from lake sediments during hypolimnetic anoxia if either (1) the molar Al(NaOH-25):Fe(BD) ratio is > 3 or (2) the molar Al(NaOH-25):P(H2O+BD) ratio is > 25. These ratios can be used as operational targets for estimation of sediment P release potential and Al dosing of P-rich sediment to prevent hypolimnetic P release under anoxic conditions.     

Reduction of counts of Listeria monocytogenes in cheese by means of high hydrostatic pressure

Inactivation of Listeria monocytogenes (strains NCTC 11994 and Scott A) was evaluated in model cheeses submitted to 10 min HHP treatments of 300, 400 or 500 MPa at 5 or 20 degrees C. Counts were measured immediately after high hydrostatic pressure (HHP) treatment (day 1) and after 2, 15 and 30 days of storage at 8 degrees C. Both strains behaved significantly different after 400 and 500 MPa, being NCTC 11994 more sensitive. Scarce differences were found among final values at both HHP treatment temperatures. Initial reductions (log cfu/g) for 400 MPa at 20 degrees C were 2.9 +/- 0.2 for strain NCTC 11994 and 1.5 +/- 0.2 for Scott A. They reached after 30-day storage 5.3 +/- 0.2 and 4.6 +/- 0.4 log cfu/g for NCTC 11994 and Scott A, respectively. For 500 MPa treatments, day-1 reductions of both strains were around 5-log cfu/g, and counts fell below quantification limit after 30 days. Injured cells (around 0.8-log cfu/g) were mostly observed in 400 MPa treated samples on days 1 and 2. Starter cells suffered higher inactivation and injury. For 20 degrees C treatments, its final counts (log cfu/g) at 300, 400 and 500 MPa were: 8.5 +/- 0.2, 5.4 +/- 0.3 and 2.5 +/- 0.1, respectively. These figures evidence the HHP potential to improve safety of cheese products.     

Effects of high-pressure treatment on free fatty acids release during ripening of ewes' milk cheese

The free fatty acid (FFA) profile of high pressure treated ewes' milk cheeses were studied to assess the effect of pressure treatment on cheese lipolysis. Cheeses were treated at 200, 300, 400 or 500 MPa (2P to 5P) at two stages of ripening (after 1 and 15 days of manufacturing; P1 and P15) and FFA were assayed at 1, 15 and 60 d ripening. On the first day of ripening, 3P1-cheeses showed levels of FFA twice that of the control cheeses. However, no significant differences were found between 3P1 and control cheeses at 60 d ripening. On the contrary, 4P1 and 5P1-cheeses had the lowest total FFA levels. The point at which pressure treatment was applied influenced the FFA profile of cheeses; cheeses pressurized at pressures<400 MPa on the first day of ripening were more similar to untreated cheeses than their homologues treated at 15 d.     

Behavior of Yersinia enterocolitica strains inoculated in model cheese treated with high hydrostatic pressure

The effects of high hydrostatic pressure treatment and the ability for survival, repair, and growth of three human pathogenic serotypes (O:1, O:3, O:8) of Yersinia enterocolitica were investigated in washed-curd model cheese made with pasteurized bovine milk. Samples were treated at 300, 400, and 500 MPa for 10 min at 20 degrees C and analyzed at 0, 1, 7, and 15 days to assess the viability of the Yersinia population. A long-term study (up to 60 days of ripening after high hydrostatic pressure treatment) was also undertaken. Treatments at 400 and 500 MPa caused maximum lethality, and only the treatment at 300 MPa showed significant differences (P < 0.05) between serotypes; the most baroresistant was O:3. Ability to repair and grow was not observed after 15 days of storage at 8 degrees C. Yersinia counts in untreated cheese samples also decreased below the detection limit at day 45 in the long-term study. These results suggest that the cheese environment did not allow recovery of injured cells or growth. A primary contributing factor to this effect seemed to be the low pH resulting from the production of lactic acid during cheese ripening.     

Specific effect of high-pressure treatment of milk on cheese proteolysis

The extent of primary and secondary proteolysis of cheeses made from raw (RA), pasteurized (PA, 72 degrees C, 15 s) or pressure-treated (PR, 500 MPa, 15 min, 20 degrees C) goats' milk was assessed. Modifications in cheese-making technology were introduced to obtain cheeses with the same moisture content, and thus studied per se the effect of milk treatment on cheese proteolysis.The PR milk cheese samples were differentiated from RA and PA milk cheeses by their elevated beta-lg content, and by the faster degradation of alphas1-, alphas2- and beta-CN throughout ripening. Non-significant differences were found in either pH 4.6 soluble-nitrogen or trichloracetic acid soluble-nitrogen contents of cheeses. However, the pasteurization of milk decreased the free amino acid production in cheese. The RA milk cheeses had the highest amount of proline and the lowest concentrations of serine, tyrosine, arginine and alpha-aminobutyric acid, whereas PR milk cheese showed higher levels of arginine.     

Comparison of ultra high pressure homogenization and conventional thermal treatments on the microbiological,physical and chemical quality of soymilk

The effect of ultra high pressure homogenization (UHPH) at 200 and 300 MPa in combination with different inlet temperatures (55, 65 and 75 °C) on soymilk was studied. UHPH-treated soymilk was compared with the base product (untreated), with pasteurized (95 °C for 30 s) and with ultra high temperature (UHT; 142 °C for 6 s) treated soymilks. Microbiological (total aerobic meshophilic bacteria, aerobic spores, and Bacillus cereus), physical (dispersion stability and particle size distribution) and chemical (lipoxygenase activity, hydroperoxide index and trypsin inhibitor activity) parameters of special relevance in soymilk were studied. Microbiological results showed that pressure and inlet temperature combination had a significant impact on the lethal effect of UHPH treatment. While most of UHPH treatments applied produced high quality of soymilks better than that pasteurized, the combination of 300 MPa and 75 °C produced a commercially sterile soymilk. UHPH treatments caused a significant decrease in particle size resulting in a high physical stability of samples compared with conventional heat treatments. UHPH treatment produced lower values of hydroperoxide index than heat treated soymilks although trypsin inhibitor activity was lower in UHT-treated products.     

Ultra-high pressure homogenisation of milk: technological aspects of cheese-making and microbial shelf life of a starter-free fresh cheese

Fresh cheeses from pasteurised (80 °C for 15 s), homogenised-pasteurised (15 + 3 MPa at 60 °C; 80 °C for 15 s) or ultra-high pressure homogenised milks (300 MPa and inlet temperature of 30 °C) were produced in order to evaluate different technological aspects during cheese-making and to study their microbial shelf life. Although the coagulation properties of milk were enhanced by ultra-high pressure homogenisation (UHPH), the cheese-making properties were somewhat altered; both conventional homogenisation and UHPH of milk provoked some difficulties at cutting the curd due to crumbling and improper curd matting due to poor cohesion of the grains. Cheese-milk obtained by UHPH showed a higher microbiological quality than milk obtained by conventional treatments. Starter-free fresh cheeses made from UHPH-treated milk showed less syneresis during storage and longer microbiological shelf-life than those from conventionally treated milk samples.