89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

Laboratory simulation of hypervelocity debris

A series of hypervelocity damage experiments were performed on spacecraft materials in order to simulate micro-size space debris traveling at 3 to 8 km/s. Two types of impact simulations were investigated: high-power pulsed laser and laser-launched micro-flyer plate. In the first case a laser was used to generate a high-pressure shock wave which propagated into the target by means of rapid ablation of the target surface. The second case used the same laser to accelerate micro-flyer plates at a target. The laser-ablation technique and the apparatus used to propel the micro-flyer plates were compatible with a space environmental chamber equipped with instrumentation capable of analyzing the vapor ejected from the sample. Data obtained from two separate damage effects were of interest in this study: the vapor blow-off produced by the impact and the mechanical damage to the target. The value of the data obtained from both simulation methods was evaluated in terms of likeness to actual space debris damage.

Data for this work were obtained from polysulfone resin and a graphite polysulfone composite. Polysulfone was selected because it was flown on the Long Duration Exposure Facility (LDEF) satellite which spent several years in low earth orbit and experienced many space debris impacts.

The chemistry of the vapor produced by the two simulation techniques was analyzed with a time of flight mass spectrometer (TOFMS) which measured changes in the vapor chemistry as a function of time after impact, obtained a velocity measurement of the vapor, and estimated surface temperature immediately after impact using dynamic gas equations. Samples of the vapor plume were also captured and examined by transmission electron microscopy (TEM).

The mechanical damage effects caused by the simulation methods on a graphit polysulfone composite and a polysulfone resin were studied. Impact craters were examined under optical and scanning electron microscopes (SEM). Based on the two damage effect criteria the micro-flyer method proved to be a useful way to simulate hypervelocity impact of space debris. The laser-ablation method however, had shortcomings and required drastic compromises in the set criteria.     

The opening speech by Dr. Carlos Dotres Martínez. International Course on Dengue and Hemorrhagic Dengue in the Americas, Instituto de Medicina Tropical "Pedro Kourí", 14 August 1995

The authors report one case of multiple bilateral hydatid cyst of kidney associated to brain and spleen localizations, after intra cardiac rupture. They point out the rarity of the bilateral kidney localization of hydatidosis, explain the dissemination mode, and stress the role of computed tomography for the pre-operative diagnosis. The treatment is above all surgical and adapted to each case. The post-operative results are satisfying. Complementary medical treatment could be useful.     

Synthesis of dissipative systems using quadratic differentialforms: part II

For pt.1 see ibid., p.53-69 (2002). The authors discuss several important special cases of the problem solved in Part I. These are: disturbance attenuation and passivation, the full information case, the filtering problem, and the case that the to-be-controlled plant is given in input-state-output representation. An interesting aspect is the notion of full information, which we define in terms of the observability of the to-be-controlled variables from the control variables. When the system is given in state space form, we obtain conditions for the existence of a controller that renders a system dissipative in terms of two coupled algebraic Riccati inequalities. The controller turns out to be a feedback system with a transfer function that is proper, but, in general, not strictly proper. Another issue that we study in this paper is feedback implementability. We find conditions under which, in the context of synthesis of dissipative systems, a controlled behavior can implemented by a feedback controller     

Transient response of a microstrip line circuit excited by anexternal electromagnetic source

The transient voltages and currents induced by an external electromagnetic field along a microstrip line interconnecting active and/or passive components are studied by using a distributed-source transmission-line model. The influence of the angle of incidence as well as that of the microstrip geometrical and electrical parameters on the line response is analyzed. The instantaneous voltage and power induced on the loads by various types of pulse excitations are computed. Numerical results are obtained both for dispersive and nondispersive lines. A line feeding a transistor microwave amplifier is also considered. The results show the effects of the multiple reflections of the field inside the dielectric substrate and of the signal at the ends of the line. Indications of how to reduce the coupling between the external field and the considered structure are given     

Characterization of charge trapping in submicrometer NMOSFET's bygate capacitance measurements

Trapping of net positive charge at low gate stress voltage, and of net negative charge at high gate stress voltage, is observed through changes in the gate-to-drain capacitance of the stressed junction. These observations can be explained in terms of electron trapping, hole trapping, and generation of acceptor-like interface states located in the upper half of the bandgap. Channel shortening is also observed and found to exhibit a logarithmic time dependence