Calculation of unbalanced magnetic pull in small cage inductionmotors with skewed rotors and dynamic rotor eccentricity

This paper sets out a simple analytical model which is able to account for the damping effects of a cage rotor on the unbalanced magnetic pull (UMP) when the rotor is dynamically eccentric. The algorithm is implemented for a 4-pole cage induction motor with a variety of rotors with different rotor eccentricity and skew. The model is verified by the assessment of the UMP vibration when the different rotors are fitted in the stator. The characteristics are compared and it is found that the predicted and measured UMP characteristics compare well. It is observed that skewing the rotor cage increases the UMP when the motor is loaded     

Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

Accelerated vibratory fatigue test by ultrasonic frequency at cryogenic temperature

The fatigue test is a time-consuming experiment. The accelerated fatigue testing technique is a dream for all researchers. In our laboratory, a vibratory fatigue testing machine was built, which works at 20 kHz for R = −1 and permits to carry out tests at cryogenic temperature. This is an automatic machine controlled by a PC computer. By using this apparatus, it is easy to save time by 400 to 500 times and a lot of liquid air (nitrogen or helium).

A titanium alloy, Ti6A14V (TA6V PQ french mark), was tested in liquid nitrogen (77 K) with this machine for S---N curve. At the same time, other fatigue tests were performed in SEP (Société Européenne de Propulsion) in conventional fatigue for the same material and the same conditions except the frequency. The comparison shows that the results are coherent.     

New formulations for unsaturated polyester resins and their interactions with low-profile agents and glass fibres

Special anhydrides, such as hexahydrophthalic, methyl-hexahydrophthalic, nadic, methylnadic and methyl-tetrahydroxyphthalic, have been polycondensed with glycols such as propylene and di-propylene, to obtain new formulations for unsaturated polyesters. The properties of these resins, such as tensile behaviour and ultraviolet resistance, neat or mixed with anti-shrinkage additives have been examined and compared to standard polyester resins. Particular attention was paid to the study of the influence of low-profile agents on the resulting phase structures of cured systems. Moreover, the role played by the different phases on the fibre/matrix addition in composite materials reinforced with coated glass fibres was also investigated.     

Interrupted ultrasonic bolt load measurements using the pulsedphase-locked loop system

A method of reacquiring a previous phase lock-point using the pulsed phase-locked loop (PPLL) ultrasonic system in situations where the measurement is interrupted such as by removing and recoupling the transducer is developed. Operation of the PPLL is mathematically analyzed in the time domain rather than in the conventional frequency domain, providing a method of characterizing multiple lock-points. The general lock-point reacquisition method that follows from the model relies on measurement over a frequency range that spans several lock-points and is demonstrated to work well for interrupted measurements on threaded fasteners. The method is analyzed for sensitivity to signal noise, and an equation is derived, expressing the number of lock-points over which to measure for successful lock-point reacquisition as a function of signal noise level. Experimental verification on a glass block shows that theoretical values obtained with this model are in good agreement with measurements. Automation of the method presented has been demonstrated, showing that it offers a practical, objective approach to making interrupted load measurements, thereby greatly widening the range of applications of the PPLL     

RBS/channelling study of ion-implanted and proton-exchanged LiNbO3:Nd:MgO planar waveguides

We present a structural study of two Nd³⁺/MgO codoped LiNbO₃ waveguides fabricated by two different methods: ion-implantation and proton-exchange. Rutherford backscattering spectrometry in combination with channelling was used to study the influence of the waveguide fabrication method on the possible modification of the LiNbO₃ crystal structure within the waveguiding layer. The results show that the ion-implanted waveguide mainly maintains the same properties as the virgin crystal, apart from a deterioration of a thin surface layer, whilst the proton-exchanged waveguide exhibits a quite different behaviour, although its surface is less damaged.     

Flow-dependent platelet behaviour in blood—material interactions

Platelet activation and adhesion are important parameters characterizing blood compatibility of biomaterials. A platelet transport theory based on convection diffusion, which describes the influence of wall shear rate, platelet concentration, axial position, hematocrit and red cell size, was originally proposed by Turitto and Baumgartner and later expanded by Aarts. This theory was applied in an in vitro perfusion system for three different materials with wall shear rates between 100s^-1 and 4300 s^-1 in order to cover the regions of diffusion controlled, reaction controlled and intermediate platelet adherence. Platelet diffusivity and platelet vessel wall surface reactivity were determined for these cases and the constants m and n were calculated using the relation between platelet diffusivity and shear rate as expressed by the following power law function: D _w=m*y ⁿ _w.     

Extending trouble ticket systems to fault diagnostics

Network management in large heterogeneous communication environments requires the incorporation of more advanced tools than are currently available, especially in the area of fault management. By providing an informational infrastructure for documenting network behavior and maintenance activities, TTSs (trouble ticket systems) have provided some relief for the fault management problem. Researchers have recognized TTSs as a means for realizing more advanced functions in network management platforms to effect automatic trouble ticket generation, fault diagnostics, and the correlation of multiple views network problems and behavior. The authors describe current research trends towards understanding and implementing these advanced functions in a TTS framework     

Low-delay distortion recursive (IIR) transmultiplexer

A new scheme based on using an IIR design algorithm is presented to demultiplex critically sampled QPSK channels for onboard processing (OBP) satellites. Comparisons with an existing nonrecursive (FIR) transmultiplexer (TMUX) show that the presented IIR TMUX is also a suitable candidate for consideration in future OBP applications