Validation of a Three-Dimensional Computational Fluid Dynamics Model of a Contact Tank

A three-dimensional (3D) computational fluid dynamics (CFD) model of a contact tank is presented in this paper. The model results are compared against 3D velocities and flow through curve (FTC) data, representing a tracer concentration profile, from a 1:8 scale physical model. The objective is to demonstrate that CFD models can simulate both the FTC and the 3D velocity field quite well. Simultaneous validation of velocities and FTC is important in ascertaining the predictive capabilities of CFD models, as physical model studies indicate that different baffle arrangements can lead to similar FTCs. Therefore, a good prediction of only FTC, as presented in previous 3D CFD model studies, does not necessarily imply a correct simulation of the flow field.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Energy management for battery-powered reconfigurable computing platforms

We define portable reconfigurable computing platforms as those which have some form of configurable logic coupled with other on-chip or off-chip processing units such as soft processors, embedded processors, and voltage-scalable processors. In the first part of this paper, we present and test a unique methodology where we dynamically change the active area of a field programmable gate array (FPGA) to vary the battery usage and lifetime of the system, by running it on several different taskgraph structures and report an average of 14% and as high as 21%, less battery capacity used, as compared to nonoptimal execution. In the second part of this paper, we integrate the above methodology with more traditional voltage and frequency scaling techniques for portable systems and present a heuristic iterative algorithm for single and multiple processing units. The iterative heuristic algorithm finds a sequence of tasks along with an appropriate design point (implementation option) for each task, such that a deadline is met and the amount of battery energy used is as small as possible. We have used several real-world benchmarks to test the effectiveness of this methodology and we will present the results.     

Capacitor coupled converter (C3) for high power DCconversion

The bang-bang controlled capacitor coupled converter (C³) is described in this paper. Due to the converter's inherent commutating property, the C³ can accommodate thyristors as well as high-power gate turn-off switches, due to zero-current switching transitions. The zero-current switching is achieved at no current stress increase, therefore, the topology is considered appropriate for high-power processing. DC and small signal AC models are derived for the bang-bang controlled C³, a design procedure is proposed, and simulation results are discussed. Finally, oscillograms from a proof of principle prototype circuit are presented     

Rheumatic heart disease in India

A cross-sectional study was carried out in rural areas of Jawan Block, District Aligarh, Uttar Pradesh, India, covering a total population of 3760 drawn from 11 villages. The total number of confirmed cases of rheumatic heart disease was 24 with a prevalence rate of 6.4 per 1000 of the general rural population. The prevalence of rheumatic heart disease increased with age until the age of 25 years. Females were more prone to rheumatic heart disease compared to males. Socio-economic class had a direct impact on the occurrence of rheumatic heart disease.     

Differential cellular response within the rabbit tendon unit following tendon injury

Since 1975, 340 patients were treated by tracheal sleeve resection for tracheal or subglottic laryngeal iatrogenic stenoses in our unit. Preoperative iterative Nd YAG laser sessions have usually been performed, without success. The length of the sleeve specimen was an average of 3 1/4 cm. Twelve patients died on the post operative course (3.5%), 3 more patients died later after failure of the procedure (0.9%) and nineteen had recurrent stenoses treated with use of a tracheostomy tube, a permanent Montgomery tube, or an endotracheal stent (5.6%). Three hundred and six patients are definitely cured (90%), at the first attempt for 265 patients, after a laser session for granulomas for 20 patients, after a second tracheal resection for 6 patients and after a temporary Montgomery tube for 15 patients. Providing there is a good selection of the patients, tracheal sleeve resection is the best treatment for iatrogenic stenosis.     

Macrophage formation of angiostatin during inflammation. A byproduct of the activation of plasminogen

Angiostatin is a potent inhibitor of tumor angiogenesis and the growth of metastatic foci. Recent studies have indicated that neoplastic cells can generate angiostatin directly or in cooperation with tumor-associated macrophages. In studies reported here, we determined whether angiostatin is generated in mice under non-neoplastic settings. Utilizing murine RAW264.7 macrophages and thioglycollate-elicited peritoneal macrophages, we demonstrate that angiostatin-like fragments are generated as a byproduct of the proteolytic regulation of membrane-bound plasmin. Plasmin proteolysis and subsequent loss in membrane-bound plasmin activity requires active plasmin but was unaffected by inhibitors of metalloproteinases. Lysine binding fragments of plasmin, isolated from macrophage-conditioned media utilizing affinity chromatography, appeared as a major (48 kDa) and two minor bands (42 and 50 kDa) in SDS-polyacrylamide gel electrophoresis and were immunoreactive with anti-kringle 1-3 IgG. Each peptide begins with Lys77 and contains the entire sequence of angiostatin. The affinity isolated plasmin fragments inhibited bFGF-induced endothelial cell proliferation. Lavage fluid recovered from the peritoneal cavities of mice previously injected with thioglycollate contained angiostatin-like plasmin fragments similar to those generated in vitro. This is the first demonstration that angiostatin-like plasmin fragments are generated in a non-neoplastic inflammatory setting. Thus, in addition to regulating pericellular plasmin activity, proteolysis of plasmin generates inactive kringle-containing fragments expressing angiostatic properties.     

The effect of composition,substrate temperature and annealing on the paramagnetic centres in SiO x /SnO co-evaporated thin films

The effects of composition and substrate temperature during evaporation and annealing, on the electron spin resonance spectra of co-evaporated SiO _x /SnO (300 nm) thin films have been investigated. The spin density is observed to decrease with increasing SnO content. This effect is attributed to the saturation of some of the paramagnetic defects such as dangling bonds and other structural defects like E₁ centres. The decrease in spin density in the composite thin films of SiO _x /SnO of constant thickness and composition with annealing and with increase in the substrate temperature during evaporation, is related to the conversion of some of the paramagnetic E₁ centres to E₁ (probable non-paramagnetic precursor of E₁) centres as well as to the saturation of some of the dangling bonds.