High-efficiency remediation of cadmium (Cd2+) from aqueous solution using poultry manure– and farmyard manure–derived biochars

Farmyard manure (FYM-BC) and poultry manure (PM-BC) derived biochars were applied as adsorbents to remove Cd²⁺ from water. Results indicated that PM-BC was a more efficient adsorbent than FYM-BC at all experimental conditions. Maximum Cd²⁺ adsorption was observed at pH 4, temperature 318 K and contact time 1 h, regardless of biochar type. The Langmuir model predicted maximum adsorption capacity of 90.09 mg g^?1 for PM-BC. The data fitting to pseudo-second-order model proposed chemisorption of Cd²⁺ onto biochars. Thermodynamics indicated that adsorption was spontaneous and endothermic. Post-adsorption analysis provided evidences of strong chemical interactions between biochars’ functional groups and Cd²⁺ ions.     

Effect of different application techniques on microshear bond strength of self-etch adhesives to dentin

Objectives: To investigate the effect of different self-etch adhesive systems application techniques: active or passive in a single or double layer on adhesive–dentin microshear bond strength.

Methods: Occlusal surfaces of 48 extracted human molars were ground to expose flat superficial dentin surfaces. Specimens were randomly divided into two main groups according to the tested self-etch adhesive system either: One-step self-etch (Adper^TM easy-one) or two-step self-etch (Adper^TM SE Plus). Each adhesive system was applied on the prepared dentin surfaces followed one of these techniques: (1) Passive application of a single layer, (2) Active application of single layer, (3) Passive application of double adhesive layer (with light curing in between), and (4) Active application of double adhesive layers. Resin composite was packed inside micro-tubes fixed on the bonded dentin surfaces and light cured for 40 s. All specimens were stored in artificial saliva either for 24 h or 3 months before testing. Microshear bond strength test was employed using a universal testing machine at a crosshead speed of 0.5 mm/min.

Results: Adper^TM SE Plus showed higher significant microshear bond strength in compared with Adper^TM easy-one. For both adhesive systems active application showed higher significant microshear bond strength to dentin than passive application. Double application of adhesive systems showed lower microshear bond strength than single application.

Conclusion: Active application of self-etch adhesives could improve the dentin microshear bond strength. Double application with curing in between the layers did not improve the bond strength to the tested adhesive.     

Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.     

Facile Synthesis of Ferrocene-Based Polyamides and Their Organic Analogues Terpolyamides: Influence of Aliphatic and Aromatic Sequences on Physico-Chemical Characteristics

Efforts have been devoted to synthesize and characterize processable polymers with desired properties. Herein, four different series of aromatic and aliphatic terpolyamides were prepared via solution phase polycondensation of 4,4′-oxydianiline and hexamethylenediamine (HMDA) with various diacids chlorides (isophthalyol dichloride, terepthalyol dichloride, 1, 1′-ferrocene dicarboxylic acid chloride and trans-azobenzene-4, 4′-dicarbonyl chloride). The structural, morphological and physico-chemical nature of as prepared polymers was explored by Fourier-transform infrared spectroscopy, scanning electron microscopy, thermal analysis (TGA and DSC), and wide-angle x-ray diffraction. Moreover, an aliphatic diamine was incorporated in varying concentration as a flexible methylene spacer and the effect of its concentration on the properties of polyamides was also studied. Changes in various physico-chemical properties such as solubility, inherent viscosity, surface morphology and flame retarding behaviour were investigated. Marked difference in morphology and solubility was observed with the change in the ratio of segments in the chain. Inherent viscosities of polymers ranged from 1.8052–1.6274 dl/g indicating reasonably moderate molecular weights. Interestingly, ferrocene based aromatic polymers were more thermally stable (T_g 260 °C, T_i 310 °C, T_h 525 °C, T_f 720 °C, for PF₀), and also found to exhibit best flame retarding behavior (limiting oxygen index value for PF₀is LOI 33.15%).

     

Interfacial activity and micellar morphology of an imidazolium ring containing zwitterionic surfactants

Zwitterionic surfactants based on 3-(1-alkyl-3-imidazolio) propane-sulfonate ([ImS3-R] where R is octyl or dodecyl) is an emerging and important class of amphiphile due to their relevance as nano reactors for the synthesis of metallic nanoparticles and accelerated acid hydrolysis. The physicochemical properties of such synthesized imidazolium ring-containing zwitterionic surfactants have been characterized by surface tension and small-angle neutron scattering (SANS) techniques. Surface tension measurements were used to calculate several thermodynamic parameters over a range of concentrations and temperatures (298–313 K). The results obtained showed a weak signature representing the critical micelle concentration (CMC) for ImS3-8, however, by increasing the alkyl length of the hydrophobic group to dodecyl, that is, ImS3-8 to ImS3-12, the signature of the CMC was much more evident. As expected, the CMC for ImS3-12 shifted to a lower concentration. An increase in temperature increased the surface activity and decreased the CMC of both zwitterionic surfactants, although the changes were small. Compared to classical surfactants, that is, sodium dodecyl sulfate and dodecyl trimethylammonium bromide, the CMC of ImS3-12 is much lower. Modeling of SANS data demonstrated that the morphology of the micelles formed by these amphiphiles may be described by the “classical” model, a central hydrophobic core, with a shell of hydrated headgroups. Due to their widespread applications in colloidal and interfacial science, the present study adds new insight to the fundamental understanding of these interesting imidazolium-based surface-active ionic liquids (ImS3-R).     

Silicon Seed Priming Combined with Foliar Spray of Sulfur Regulates Photosynthetic and Antioxidant Systems to Confer Drought Tolerance in Maize (Zea mays L.)

Silicon - The present study evaluated the effect of silicon (Si) seed priming and sulfur (S) foliar spray on drought tolerance of two contrasting maize hybrids viz. drought tolerant Hi-Corn 11 and...     

Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art

Russian Journal of Non-Ferrous Metals - Aluminum alloys have always been the material of choice for the aircraft industry owing to their versatile attributes, such as excellent strength to weight...     

Structural,viscoelastic, and vulcanization study of sponge ethylene–propylene–diene monomer composites with various carbon black loadings

In this article, we report the effect of various carbon nanoparticle concentrations on the structural, curing, tan δ, viscosity variation during vulcanization, thermal, and mechanical characteristics of ethylene–propylene–diene monomer polymer sponge composites. The purpose of this study was to develop high‐strength, foamy‐structure polymer composites with an optimum filler to matrix ratio for advanced engineering applications. We observed that the structural, vulcanization, viscoelastic, and mechanical properties of the fabricated composites were efficiently influenced with the progressive addition of carbon content in the rubber matrix. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39423.