A 21-mW 8-b 125-MSample/s ADC in 0.09-mm/sup 2/ 0.13-/spl mu/m CMOS

This paper presents an 8-b two-step subranging analog-to-digital (ADC) using interpolation, averaging, offset compensation, and pipelining techniques to accomplish an effective number of bits of 7.6 b at 125 MSample/s. The 0.13-/spl mu/m CMOS ADC occupies 0.09 mm/sup 2/ and consumes 21 mW.     

Doppler spread estimation in mobile radio systems

In this letter, Doppler spread estimation in digital mobile radio systems is described. A maximum-likelihood approach is derived, and used to develop suboptimal approaches with lower complexity. The proposed algorithms rely on periodic channel estimation and can be used in both TDMA and CDMA systems     

The strain hardening rotating hollow shaft subject to a positive temperature gradient

Summary The modeling of deformation in flexible multibody systems is still under intensive investigation. While the floating frame of reference formulation has become a standard for the modeling of deformable moving bodies, formulations based on absolute coordinates are comparatively new. The recently developed absolute nodal coordinate formulation uses solely nodal position and slopes as degrees of freedom for structural elements. The numerical treatment is similar to the absolute coordinate formulation, which is investigated in the following. An efficient formulation based on absolute coordinates with a reduced strain tensor (similar to corotational formulations) has been derived recently, and the analogy to the floating frame of reference formulation has been shown. The efficiency of this formulation is based on a co-rotated stiffness matrix which is factorized only once, however, only linear constraints have been treated up to now. The present paper treats the extension of the advantages of the co-rotated formulation with respect to nonlinear constraints, damping and contact. Constraints are discussed for the special cases of linear and nonlinear dependence on the deformation degrees of freedom. The (implicit) Newmark scheme is used to illustrate the time stepping procedure within the present method. In the case of a small number of nonlinear constraints, a single time step can be performed by solving only a small system of nonlinear equations by means of Newton's method. A numerical example shows a method to reduce the number of constraints and illustrates the computational advantages of the proposed method.     

Speech perception test in Italian language for profoundly deaf children

Speech perception tests are an important part of procedures for diagnosing pre-verbal hearing loss. Merely establishing a child's hearing threshold with and without a hearing aid is not sufficient to ensure an adequate evaluation with a view to selecting cases suitable for cochlear implants because it fails to indicate the real benefit obtained from using a conventional hearing aid reliably. Speech perception tests have proved useful not only for patient selection, but also for subsequent evaluation of the efficacy of new hearing aids, such as tactile devices and cochlear implants. In clinical practice, the tests most commonly adopted with small children are: The Auditory Comprehension Test (ACT), Discrimination after Training (DAT), Monosyllable, Trochee, Spondee tests (MTS), Glendonald Auditory Screening Priocedure (GASP), Early Speech Perception Test (ESP), Rather than considering specific results achieved in individual cases, reference is generally made to the four speech perception classes proposed by Moog and Geers of the CID of St. Louis. The purpose of this classification, made on the results obtained with suitably differentiated tests according to the child's age and language ability, is to detect differences in perception of a spoken message in ideal listening conditions. To date, no italian language speech perception test has been designed to establish the assessment of speech perception level in children with profound hearing impairment. We attempted, therefore, to adapt the existing English tests to the Italian language taking into consideration the differences between the two languages. Our attention focused on the ESP test since it can be applied to even very small children (2 years old). The ESP is proposed in a standard version for hearing-impaired children over the age of 6 years and in a simplified version for younger children. The rationale we used for selecting Italian words reflect the rationale established for the original version, but the choice of single words follows different criteria from the original version. In fact, the two languages differ in important linguistic features so that the test can not be not adapted to the Italian language by simply translating the words involved. As currently there is no children's language dictionary in Italian arranged according to age bracket, we chose words used in children and in pre-school reading material.     

IGNITION DELAY CHARACTERISTICS OF SOME TURKISH VEGETABLE OIL-DIESEL FUEL BLENDS

Vegetable oils have chances to be used in Diesel engines as alternative fuels contributing to the solution of some agricultural, environmental and economical problems. Direct use of them has some technical problem yet but as blended fuels with diesel fuel or esters they have places on the application area. In this paper the effect of the compression ratio on ignition delay is investigated in an ASTM-CER engine working with four different types of vegetable oil of Turkish origin (sunflower, corn, soybean, and olive oil) blended with grade No.2-D diesel fuel at a ratio of 20/80 (v/v) and the results are compared with baseline diesel fuel. Longer ignition delay periods have generally been obtained for blend fuels ranking from olive oil to sunflower oil as compared to diesel fuel.     

Analysis and Implementation of Multiple–Input, Multiple–Output VBLAST Receiver From Area and Power Efficiency Perspective

This paper presents an analysis of the vertical Bell Laboratories layered space time (VBLAST) receiver used in a multiple-input multiple-output (MIMO) wireless system from the hardware implementation perspective and identifies those processing elements that consume more area and power due to complex signal processing. This paper models a scalable VBLAST receiver based on minimum mean square error (MMSE) nulling criteria assuming a block flat fading channel. After identifying the major area and power consuming blocks, this paper proposes two area and power efficient VLSI architectures for the block that computes pseudoinverse of the channel matrix. This paper discusses different tradeoff issues in both architectures and compares them with the architectures in the literature     

Barriers to effective configuration management application in a project context: An empirical investigation

Configuration management (CM) is not a new set of ideas, what it does represent is an effective way for project managers to use a formalized methodology in order that they can manage status and changes to it throughout the lifecycle. This research sets out to identify and prioritize the obstacles in the effective implementation of the CM practices, categorize these obstacles into more manageable groups of factors, and analyse the effects of multiple factors on the identification and rating of these barriers. Nineteen barriers are finalized and prioritized on the basis of their criticality and as a result three groups (managerial and organizational barriers, implementation barriers, and planning and process barriers) are extracted with the help of factor analysis. This study will help both configuration management and project management professionals to plan better and avoid the impacts of these key obstacles from much earlier in the definition phase.     

Will New Antenna Materials Enable Single Path Multiple Access (SPMA)?

The aim of this paper is to introduce a novel frequency reuse concept especially for macro cellular networks to substantially increase the mobile network capacity, and simultaneously to avoid the implementation of low efficient small cells. Single path multiple access (SPMA) utilizes the characteristics of independent propagation paths for particular geographical location in the coverage area of mobile network. The proposed concept is based on the assumption that new approach will be adopted by the antenna manufacturers for producing advanced antennas by utilizing materials like metamaterials including carbon based nanotechnology, and graphene. In SPMA concept, communication between base station and mobile station happens through only single independent propagation path, and frequency resources can be reused in 5 m  \(\times \)  5 m areas or even more often in 1 m  \(\times \)  1 m areas, but limited by a base station/mobile station antenna requirement. Thus, the capacity of the network will be increased dramatically, and it can be managed in centralized manner at certain macro site locations. In already deployed cellular networks, these macro sites are mostly easily available, and that would help to implement SPMA to enhance the network capacity. Simulation results provided in this paper show the applicability of SPMA technique, by limiting the radiation of signal as single path propagation between base station and mobile station.     

Nanostructure and mechanical properties of aromatic polyamide and reactive organoclay nanocomposites

Aromatic polyamide/organoclay nanocomposites were synthesized using the solution blending technique. Treatment of montmorillonite clay with p-phenylenediamine produced reactive organophilic clay for good compatibility with the matrix. Polyamide chains were prepared by condensing a mixture of 1,4-phenylenediamine and 4-4′-oxydianiline with isophthaloyl chloride under anhydrous conditions. These chains were end capped with carbonyl chloride using 1% extra acid chloride near the end of reaction to develop the interactions with organoclay. The dispersion and structure–property relationship were monitored using FTIR, XRD, FE-SEM, TEM, DSC and tensile testing of the thin films. The structural investigations confirmed the formation of delaminated and disordered intercalated morphology with nanoclay loadings. This morphology of the nanocomposites resulted in their enhanced mechanical properties. The tensile behavior and glass transition temperature significantly augmented with increasing organoclay content showing a greater interaction between the two disparate phases.