Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

From information to probability: An axiomatic approach—Inference is information processing

We define the very rich language of composed conditionals on a three‐valued logic and use this language as the communication tool between man and machine. Communication takes place for three reasons: knowledge acquisition, query, and response. Learning, thinking, and answering questions are of a pure information theoretical nature. The pivot of this knowledge processing concept is the amount of information (bit) we receive if a conditional becomes true. We follow an axiomatic approach to information theory rather than the classical probabilistic approach of Shannon; information comes first, and then comes probability. In the light of this philosophy, query and response experience new interpretations. Both, acquisition and response are realized by maximizing entropy and minimizing relative entropy, respectively. The iterative solution of these mathematical optimization problems gives new insights into the adaptation of prior knowledge to new information. Our expert system shell SPIRIT supports this kind of knowledge processing, which will be established by suitable examples. © 2003 Wiley Periodicals, Inc.     

Psychological research on race differences.

Responds to the discussion by A. H. Yee et al (see record 1994-09250-001) of A. R. Jensen's (e.g., see record 1986-18910-001) research on racial differences in abilities and states that the references to Jensen's work are dated. Jensen notes more recent research (Jensen and P. A. Whang; see PA, Vol 81:1181 and 20927) and provides an explanation for his research focus on Black–White differences in cognitive abilities. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

Models of visual word recognition: Sampling the state of the art.

A classification of models of visual word recognition is presented that facilitates formal comparisons between models of different formats. In light of the theoretical contributions to this special section, sets of criteria for the evaluation of models and strategies for model construction are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Strategies and automaticity: I. Basic findings and conceptual framework.

Evaluated the contributions of strategic and data-driven factors to skilled performance by manipulating the predictability of the class of stimuli used in a memory search task. In Exp 1, when consistent mapping (CM) and varied mapping (VM) conditions were blocked, large performance differences were observed; however, when CM and VM trials were mixed, performance differences were reduced. In Exp 2, mixed training led to a less skilled performance than blocked training. Moreover, transfer conditions revealed a critical interval for learning to adopt and deploy differential response strategies. Exp 3 demonstrated that the differential response strategies were not stimulus specific. Analysis suggests that skilled performance can be conceptualized as an interaction between enhanced evidence accumulation and strategic setting of response criteria. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of four maintenance programs on the long-term management of obesity.

This study evaluated the effectiveness of four posttreatment programs designed to enhance the long-term maintenance of weight loss. Mildly and moderately obese adults (N?=?123) were randomly assigned to one of the following five conditions: (a) behavior therapy only; (b) behavior therapy plus a posttreatment therapist-contact maintenance program; (c) behavior therapy plus posttreatment therapist contact plus a social influence maintenance program; (d) behavior therapy plus posttreatment therapist contact plus an aerobic exercise maintenance program; or (e) behavior therapy plus posttreatment therapist contact plus both the aerobic exercise and social influence maintenance programs. All posttreatment programs were conducted in 26 biweekly sessions during the year following behavioral treatment for obesity. At an 18-month follow-up evaluation, all four conditions that combined behavior therapy with a posttreatment maintenance program yielded significantly greater long-term weight losses than behavior therapy alone. (PsycINFO Database Record (c) 2010 APA, all rights reserved)