Moth‐eye antireflection coating fabricated by nanoimprint lithography on 1 eV dilute nitride solar cell

We report on the performance of biomimicked antireflection coating applied to dilute nitride solar cell. The coating consists of nanostructures replicating the moth‐eye geometry and has been fabricated by nanoimprint lithography directly within the window layer covering the dilute nitride absorbing junction. The mean reflectivity within the spectral range of 320–1800 nm remains under 5% for incident angles up to 45°. The effect of the coating on the cell performance was assessed by measuring the current–voltage characteristics under simulated solar illumination. A clear performance increase was identified when comparing a solar cell with the moth‐eye coating with a solar cell having a standard SiN_x/SiO₂ coating. Copyright © 2012 John Wiley & Sons, Ltd.     

Low Power High-Speed Neuron MOS Digital-to-Analog Converters with Minimal Silicon Area

Digital-to-analog converts utilizing neuron MOS-transistors were designed. Different DACs were implemented and characterized in order to compare various topologies. Criteria to select structures were low power, fast performance and minimal silicon area. A basic 8-bit version is implemented with only one neuron MOS-transistor and eight capacitors. The silicon area of this D/A converter is only 0.04 mm² and the power consumption is 8.4 mW with conversion speed of 200 MS/s. An enhanced 8 and 10 bit versions utilizing neuron PMOS transistor and some extra circuitry are also proposed and tested. The silicon area of the enhanced 10 bit circuit is only 0.03mm² while the performance is as good as in the case of the basic version. The measured differential nonlinearity is 0.38 LSB and integral nonlinearity is 0.55 LSB for the enhanced 10 bit structure.     

Effect of molecular aggregation by thermal treatment on photovoltaic properties of MEH-PPV: Fullerene-based solar cells

The effect of a thermal annealing treatment at various temperatures on the performance of bulk heterojunction photovoltaic cells based on poly[2-methoxy-5-(2′-ethyl-hexyloxy)-p-phenylene vinylene] (MEH-PPV) and buckminsterfullerene (C₆₀) composites was investigated. With the increase in temperature, three stages were observed: from 60 to 120 °C, the photovoltaic performance of the composite devices became better with the rising temperature; from 120 to 180 °C, the photovoltaic performance decreased to a minimum; but, at about 200 °C, a sharp rise occurred, followed by a gradual decline. The obvious red-shift of the photoluminescence (PL) spectra and the new PL peak and shoulder at about 620 and 660 nm, respectively, indicated the formation of molecular aggregation and the lengthened and the ordered conjugated segments. It was suggested that the crystallization of C₆₀ after thermal annealing at 200 °C, which matched the nano-sized ordered domains of MEH-PPV led to a sharp enhancement in photovoltaic performance.     

The effect of temperature on the pulsed current processing behaviour and structural characteristics of porous ZSM-5 and zeolite Y monoliths

Hierachically porous monoliths of ZSM-5 and Y zeolites have been prepared by pulsed current processing (PCP). The densification behaviour and structural characteristics during rapid thermal treatment of the zeolites have been determined and related to the influence of the Si:Al ratio on the thermal stability of the zeolites. Monoliths of macroscopic shape can be prepared with an insignificant loss of surface area and micropore volume when the PCP-treatment was performed at temperatures below a critical maximum PCP temperature (T_PCP). Full-profile fittings of the powder X-ray diffraction patterns showed that the lattice strain of zeolite Y increases rapidly above the critical T_PCP while the ZSM-5 zeolites undergo a phase transition from orthorhombic to monoclinic. The use of a novel ceramic processing route for the production of the zeolite monoliths that do not significantly influence the structural characteristics and surface area of the starting materials has a potential to be of importance in catalysis and gas separation applications.     

Using regression makes extraction of shared variation in multiple datasets easy

In many data analysis tasks it is important to understand the relationships between different datasets. Several methods exist for this task but many of them are limited to two datasets and linear relationships. In this paper, we propose a new efficient algorithm, termed cocoreg, for the extraction of variation common to all datasets in a given collection of arbitrary size. cocoreg extends redundancy analysis to more than two datasets, utilizing chains of regression functions to extract the shared variation in the original data space. The algorithm can be used with any linear or non-linear regression function, which makes it robust, straightforward, fast, and easy to implement and use. We empirically demonstrate the efficacy of shared variation extraction using the cocoreg algorithm on five artificial and three real datasets.     

Design and evaluation of mood pictures in social music discovery service

This paper describes the iterative design process and evaluation of mood pictures in a social music discovery service. The service enables users to consume and collaboratively create playlists based on the pictures. In total, 45 Finnish users took part in the qualitative evaluations. This paper presents the results regarding the preset mood picture design and introduces user-generated mood picture playlists. Based on the results, a set of design implications for mood pictures is introduced. In addition, the consistency of user responses from a quantitative picture–music association test shows the applicability of mood picture–music associations to a music discovery service.     

Indoor environment quality contracts in building projects

The scientific literature is replete with examples that indicate that poor indoor conditions at workplaces reduce work performance and increase short-term sick leave. To address good indoor environment quality (IEQ), strategic and practical design decisions are needed in the early phase of the building process to ensure successful implementation. However, current procurement practices are hampered by fragmentation, long subcontract chains and vague performance requirements. A preliminary study is undertaken that focuses on developing a method of contracting that enables the attainment and verification of the desired IEQ. Using a review of international research and practices, existing commissioning methods and contract procedures are identified for their attention to IEQ. A contract procedure is proposed that fosters agreement on indoor environment between building owners and tenants, and which directs a building project to give users the guarantee of indoor condition. To make a pre-lease contract agreement that includes IEQ, the factors having an influence on the IEQ chain must be included in all building contracts such as those of design, purchase, and operation and maintenance. Thus, the requirements of IEQ require their incorporation into every phase of the building project. The main elements in these contracts, in addition to the requirements of IEQ, are those verifying quality, bonuses and sanctions.

La littérature scientifique est riche en exemples qui montrent que la médiocrité des conditions intérieures sur le lieu de travail réduit les performances opérationnelles et augmente les absences de courte durée pour raisons de santé. Pour obtenir un environnement intérieur de bonne qualité (IEQ), il faut, dès le début du processus de construction, prendre des décisions d'ordre stratégique et pratique en vue d'une mise en ?uvre réussie. Or, la fragmentation, les longues chaînes de contrats de sous-traitance et le manque de précision des impératifs de performance sont autant d'obstacles aux pratiques d'approvisionnement actuelles. Une étude préliminaire est entreprise qui porte, pour l'essentiel, sur le développement d'un mode de réalisation permettant de satisfaire et de vérifier la qualité de l'environnement intérieur recherchée. S'appuyant sur une analyse des pratiques et de la recherche au niveau international, l'auteur recense les méthodes de mise en service et les procédures contractuelles existantes en fonction de l'intérêt porté à l'IEQ. Il est proposé une procédure contractuelle qui encourage les accords en matière d'environnement intérieur entre propriétaires de bâtiments et occupants et qui prescrit un projet de construction offrant aux utilisateurs la garantie d'un environnement intérieur satisfaisant. Pour conclure une convention contractuelle, préalablement au bail de location, qui prévoit l'IEQ, il faut inclure les facteurs ayant une influence sur la chaîne IEQ dans tous les contrats de bâtiments, comme la conception, l'approvisionnement, l'exploitation et la maintenance. Les exigences en matière d'IEQ nécessitent donc qu'elles soient intégrées à toutes les phases d'un projet de bâtiment. Les principaux éléments dans ces contrats, outre les exigences d'IEQ, sont ceux qui vérifient la qualité, les primes et les sanctions.     

On the expressiveness of subset-sum representations

We develop a general theory for representing information as sums of elements in a subset of the basic set A of numbers of cardinality n, often refered to as a “knapsack vector”. How many numbers can be represented in this way depends heavily on n. The lower, resp. upper, bound for the cardinality of the set of representable numbers is quadratic, resp. exponential, in terms of n. We give an algorithm for the construction of a knapsack vector of any prescribed expressiveness (that is, the cardinality of the set of representable numbers), provided it falls within the range possible for expressiveness. Received: 13 March 1997 / 18 November 1999     

Characterizing the generalized lambda distribution by L-moments

The generalized lambda distribution (GLD) is a flexible four parameter distribution with many practical applications. L-moments of the GLD can be expressed in closed form and are good alternatives for the central moments. The L-moments of the GLD up to an arbitrary order are presented, and a study of L-skewness and L-kurtosis that can be achieved by the GLD is provided. The boundaries of L-skewness and L-kurtosis are derived analytically for the symmetric GLD and calculated numerically for the GLD in general. Additionally, the contours of L-skewness and L-kurtosis are presented as functions of the GLD parameters. It is found that with an exception of the smallest values of L-kurtosis, the GLD covers all possible pairs of L-skewness and L-kurtosis and often there are two or more distributions that share the same L-skewness and the same L-kurtosis. Examples that demonstrate situations where there are four GLD members with the same L-skewness and the same L-kurtosis are presented. The estimation of the GLD parameters is studied in a simulation example where method of L-moments compares favorably to more complicated estimation methods. The results increase the knowledge on the distributions that belong to the GLD family and can be utilized in model selection and estimation.