Application of a multiline material characterization method to inkjet printed electronics

Material characterization has become increasingly important with the adoption of simulation‐based workflow for microwave electronics design. This article focuses on the characterization of printable electronics materials using transmission‐line measurements and demonstrates the capability of the multiline characterization method to separate dielectric and conductor losses when line geometry and material properties vary between the lines. The effects of multiline algorithm, number of line standards, and methods for selecting optimal line lengths are demonstrated. Consistent characterization results are obtained from inkjet‐printed transmission lines on two different substrate materials. In addition, local conductor thickness variations are demonstrated as an effective way to decrease losses. Finally, the simulation‐based procedure for determining the material properties is outlined and applied to printable electronics characterization. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:177–183, 2014.     

A grain structure based statistical simulation of electromigration damage in chip level interconnect lines

Reliability assessment of chip level interconnects is based on accelerated testing at a higher temperature and a larger current density than expected in service conditions. The critical parameters needed to extrapolate accelerated test data to service conditions are the activation energy, Q, and the current density exponent, n. Although current density exponents and activation energies are well known for the elemental processes (like void nucleation due to electromigration (EM) generated stress), there is no consensus on which apparent activation energy or current density exponent values would be applicable in reliability estimates for realistic line structures. Here, we first review our EM simulation tool. We then apply the EM simulation tool to statistical life time analysis of realistic-like line structures generated by a Monte-Carlo algorithm. For a given grain structure distribution, the stress evolution along the line is simulated, letting voids nucleate at the sites where the stress exceeds a critical level, and the nucleated voids are then allowed to grow till the largest one reaches the preset critical size, resulting in a ‘failure’ of the particular line. By repeating this process for various current densities and temperatures, it becomes possible to extract the apparent activation energies and current density exponents from the simulation data.     

Quit and Win campaigns as a long-term anti-smoking intervention in North Karelia and other parts of Finland

OBJECTIVE: To evaluate Quit and Win campaigns repeated in North Karelia and rest of Finland. DESIGN: Repeated comparisons of participation rates, abstinence rates, and other measures between North Karelia and the rest of Finland. SUBJECTS: Adult daily smokers in Finland participating in the Quit and Win contests in 1986-1997. INTERVENTIONS: Quit and Win smoking cessation campaigns targeted at adult daily smokers throughout Finland in 1986, 1989, 1994, 1996, and 1997, including more intensive activities in North Karelia. MAIN OUTCOME MEASURES: Participation rates, self reported six-month abstinence rates, other effectiveness measures (% of smokers who attended, intended, tried, and succeeded in cessation). RESULTS: North Karelia's participation rates were significantly higher in each campaign compared with the rest of Finland. The abstinence rates in North Karelia were also higher, the difference being significant in 1986 and 1994 (p < 0.05). In the target population in 1996 over 75% of smokers in North Karelia, compared with 40% of smokers surveyed elsewhere, reported awareness of the campaign (p < 0.001). Approximately 9% of the smokers in North Karelia and 6% elsewhere intended to participate (p = NS). Over 2% in North Karelia, compared with less than 1% elsewhere, tried to quit (p < 0.001). Among the targeted group, 0.3% of North Karelian smokers were complete abstainers throughout the 12 months of follow up, compared with an average of 0.1% in other areas (p < 0.001). CONCLUSIONS: The Quit and Win campaign is a feasible cessation method in long-term community-wide programmes. Intensified community activities are associated with higher success. In repeat campaigns, high participation and abstinence rates can be maintained.     

Smoking reduction predicts cessation: longitudinal evidence from the Finnish adult twin cohort.

The aim of the study was to examine whether smoking reduction over a 6-year period (1975-1981) predicted smoking cessation 9 years later by 1990. The longitudinal data from three surveys over 15-year period among the Finnish adult twin cohort were used. The data were collected by postal surveys in 1975, 1981, and 1990, and the sample comprised 11,015 participants, of whom 2,443 were persistent current smokers in 1975 and 1981. Smoking cessation by 1990 was examined as the outcome measure. Nineteen percent reported having stopped smoking by 1990, corresponding to an approximate annual rate of smoking cessation of 2%. Those who had quit smoking by 1990 had larger decreases in smoking between 1975 and 1981. The odds ratio for quitting by 1990 increased with increasing levels of reduction in amount smoked between 1975 and 1981. This was found in both categorical and trend analyses, and when adjusting for age, sex and for amount of baseline smoking. The model among twin pairs discordant for cessation indicated that the association of smoking reduction with increased likelihood of cessation was independent of genetic or early shared family influences on smoking behavior. We conclude that smokers who are able to decrease the number of cigarettes smoked per day by at least 25% are more likely to quit later.     

Multiclass optical orthogonal codes for multiservice optical CDMA networks

Optical code division multiple access (CDMA)-based networks are an interesting alternative to support various traffic types of multimedia applications with highly variable performance targets. Generally, multilength codes are designed to support multirate services, while the multiweight codes are designed to support differentiated quality of service (QoS) for multimedia applications. However, existing optical orthogonal codes (OOCs) are limited to single class or multiclass with restricted weight and length properties. Therefore, there exists a lack of flexibility in the existing OOCs to support arbitrary rate and QoS. This paper presents a proposal of generation procedure and performance analysis of joint multiweight multilength strict OOCs. The approach used in this paper is to apply a methodology strongly relying on developed analytical theory that is supported by computer optimization, because it has turned out that it is mathematically intractable to construct unconstraint joint multilength multiweight OOCs using pure algebraic techniques. The generated code set fulfills the conditions of strictly OOCs, namely, the maximum nonzero shift autocorrelation and the maximum cross correlation constraints of one. The mark position difference (MPD) approach is used to generate in a flexible way the multiclass code set. The MPD results in the simple evaluation of multiclass code set cardinality. Furthermore, the multiple-access interference (MAI) in a multiclass OOC system is evaluated by modeling the interference per class as a Poisson distribution to simplify performance evaluation with acceptable accuracy.     

Combined inhibitory effect of bovine immune whey and peroxidase-generated hypothiocyanite against glucose uptake by Streptococcus mutans

A case of chronic ulcer of the lower lip, which persisted for three years and resisted all locals treatments, is presented. Recovery was achieved with excision. The specimen was examined macroscopically, and showed a prominent inferior labial artery or calibre-persistent artery, an uncommon entity. Patient-literature was reviewed.     

Mobile Diary for Wellness Management—Results on Usage and Usability in Two User Studies

The prevalence of lifestyle-related health problems is increasing rapidly. Many of the diseases and health risks could be prevented or alleviated by making changes toward healthier lifestyles. We have developed the Wellness Diary (WD), a concept for personal and mobile wellness management based on Cognitive-Behavioral Therapy (CBT). Two implementations of the concept were made for the Symbian Series 60 (S60) mobile phone platform, and their usability, usage, and acceptance were studied in two 3-month user studies. Study I was related to weight management and study II to general wellness management. In both the studies, the concept and its implementations were well accepted and considered as easy to use and useful in wellness management. The usage rate of the WD was high and sustained at a high level throughout the study. The average number of entries made per day was 5.32 (SD = 2.59, range = 0–14) in study I, and 5.48 (SD = 2.60, range = 0–17) in study II. The results indicate that the WD is well suited for supporting CBT-based wellness management.      

Evaluation of isoleucine,leucine, and valine as a second-limiting amino acid for milk production in dairy cows fed grass silage diet

Five Finnish ruminally cannulated Ayrshire cows were used in a 5 x 5 Latin square trial with 14-d periods to determine whether branched-chain amino acids (AA) are the second- or colimiting AA for milk protein synthesis on grass silage-cereal based diet. Mammary metabolism of AA as well as AA supply from the basal diet were also studied. Grass silage (17.5% crude protein) was given ad libitum with 9 kg/d as a cereal-based concentrate (13.8% crude protein). Treatments were basal diet without AA infusion (Control), abomasal infusion of AA mixture of His, Ile, Leu, and Val at 8.5, 14.9,27.9, and 18.3 g/d, respectively, AA mixture minus Ile, AA mixture minus Leu, and AA mixture minus Val. Glucose was infused on all treatments at 250 g/d. Amino acid infusions had no effect on dry matter intake (mean 19.2 kg/d), yields of milk (mean 25.3 kg/d), energy-corrected milk (mean 25.9 kg/d), milk protein (mean 807 g/d), lactose (mean 1261 g/d), or fat (mean 1056 g/d). Milk composition was not affected by the treatments. Plasma concentrations of His and Val responded to AA infusions but concentration of Ile increased only on treatment AA mixture minus Leu, and concentration of Leu only on treatment AA mixture minus Ile. Infusion of AA mixture of His, Ile, Leu, and Val decreased plasma concentrations of Arg, Lys, Met, Phe, and Tyr. Amino acid infusions did not affect concentrations of plasma urea and energy metabolites or AA utilization by the mammary gland. Based on unchanged production parameters, the supply of His or branched-chain AA seemed not to be limiting under the current dietary conditions. Changes in plasma AA concentrations suggest either antagonism between individual AA in absorption or increased partitioning of AA into the muscle tissues. About 75% of omasal canal nonammonia nitrogen flow (427 g/d) was of microbial origin, and AA profiles of microbial protein and omasal canal digesta were fairly similar. Postruminal AA supply seems to be dependent on the basal diet, but variation may exist even within the similar basal diets.     

IMPROVEMENTS IN THE SURFACE CHARACTERISTICS OF STAINLESS STEEL WORKPIECES BY BURNISHING WITH AN AMORPHOUS DIAMOND-COATED TIP

Burnishing is a cold working process that can be used to improve surface finish and surface hardness of workpieces. Conventionally, diamond or hard metal burnishing tools are used. In the present work, a novel burnishing tool was created by depositing amorphous diamond coating (AD) on a stainless steel tip. This tool was used to improve the surface finish and surface hardness of Nitronic-50 HS stainless steel workpieces. Nitronic-50 HS is used in a wide range of applications in industry. The burnishing process was carried out at different burnishing parameters (force, revolution speed, feed and number of tool passes). Burnishing parameters had a significant effect on the finishing process and they had to be optimized to achieve the best results. Remarkable improvements in surface finish (70% decrease in roughness) and hardness (25% increase) could be achieved with this tool and process in the surface finishing of Nitronic-50 stainless steel workpieces. From the tribological point of view, the AD-coated tip performed slightly better than a corresponding tip modified from a commercial polycrystalline diamond tip. AD coating seems to be very suitable for use in mechanical surface finishing tools such as a burnishing tip.