The categories L-\mathbf{Top}_{0} and L-\mathbf{Sob} as epireflective hulls

We show that the category \(L\) - \(\mathbf{Top}_{0}\) of \(T_{0}\) - \(L\) -topological spaces is the epireflective hull of Sierpinski \(L\) -topological space in the category \(L\) - \(\mathbf{Top}\) of \(L\) -topological spaces and the category \(L\) - \(\mathbf{Sob}\) of sober \(L\) -topological spaces is the epireflective hull of Sierpinski \(L\) -topological space in the category \(L\) - \(\mathbf{Top}_{0}\) .     

Hardness and Fracture Toughness of SiC-Particle-Reinforced MoSi2 Composites

The indentation technique has been used to evaluate the hardness and fracture toughness of SiC-reinforced MoSi₂ composites made by hot-pressing. It is seen that the toughness increases with increasing indentation crack length (under increasing load) and a probable mechanism responsible for this behavior is described. It is also observed that there is an optimum volume fraction of SiC particles for which the maximum fracture toughness of the composite can be achieved.     

Effect of Ozone on Aspergillus niger Causing Black Rot Disease in Onion

The effect of ozone on Aspergillus niger causing black rot disease in onion was studied in culture. Ozone induced the spore germination in all treatments and few spores showed rapid swelling, resulting in the production of 2-3 germ tubes per spore compared to control. Although all the ozone treated spores germinated, all of them did not produce uniform colony morphology. Some colonies which developed from ozone treated spores failed to produce spores and such colonies appeared as grey patches of mycelia without spores amidst surrounding black sporulating colonies. Further work is in progress to study the mechanism involved in formation of sterile mycelia by ozone.     

Production and evaluation of vildagliptin-loaded poly(dl-lactide) and poly(dl-lactide-glycolide) micro-/nanoparticles: Response surface methodology approach

A laboratory scale spray dryer was used to encapsulate vildagliptin (VLG), an antihyperglycemic drug, into different polymers such as poly(dl-lactide) (PDLA), poly(dl-lactide-glycolide)-50:50 (PLGA 50:50), and poly(dl-lactide-glycolide)-75:25 (PLGA 75:25). Response surface methodology (RSM) was employed to evaluate the effects of process and formulation factors on the encapsulation efficiency (EE). The physicochemical properties of the drug-loaded micro-/nanoparticles, mainly the drug loading (DL), particle size distribution, surface morphology, drug–polymer compatibility, and release rate were investigated. % EE of drug-loaded micro-/nanoparticles were in the range of 57.10% to 76.44%. PLGA50:50 micro-/nanoparticles showed highest EE as compared to PDLA and PLGA75:25 micro-/nanoparticles. The mean particle size of the micro-/nanoparticles containing PLGA 50:50, PLGA 75:25, and PDLA polymers were 428?nm, 640?nm, and 1.22 µm, respectively. Surface morphology study revealed smooth, spherical and nonporous surface structures of the micro-/nanoparticles. Fourier transform infrared spectroscopy studies confirmed the drug–polymer compatibility. Powder X-ray diffraction analysis of micro-/nanoparticles revealed that VLG was present in the amorphous form within the micro-/nanoparticles formulations. In vitro release study demonstrated that VLG is slowly released from micro-/nanoparticles for 12?h and the drug release rate was influenced by type and viscosity of polymers used. This work suggests that PDLA, PLGA 50:50, and PLGA75:25 polymers are able to sustain the VLG release rates from micro-/nanoparticles.     

Model for drying during fluidized-bed combustion of wet low-rank coals

An unsteady state heat conduction model with a convective boundary condition is proposed for the drying of low-rank, high-porosity coals, such as lignites, during fluidized-bed combustion. The drying front is assumed to be the receding surface of a wet core. The solution technique for this moving boundary problem is based on the heat balance integral approach with immobilization of the moving boundary by a change in space variable. The governing cubic equation describing the drying curve in dimensionless form may be solved easily by the Newton—Raphson method. The model predictions are compared with experimental data for Mississippi lignite with excellent agreement. A correlation for estimation of total drying time is proposed. The temperature profiles obtained may be used for the study of the coupled drying and devolatilization in fluidized-bed combustors. The profiles could also be of importance in the study of formation of fissures/cracks in lignites subjected to intense heating conditions encountered during fluidized-bed combustion.     

THERMAL REGENERATION OF ACTIVATED CARBONS

The thermal regeneration of activated carbons loaded with p-nitrophenol (PNP) and other aromatic compounds was studied using a thermal balance. After pyrolysis of the adsorbates in nitrogen at 700°C, the residues were gasified with oxygen at 415 to 500°C or with steam at 840 to 920°C. Residues from PNP were several times more reactive to oxygen than the base carbons and also showed greater chemisorption of oxygen. For steam gasification, only small differences between spent and fresh carbons were found.     

Effect of prenatal and postnatal exposure to ethanol on rat central nervous system gangliosides and glycosidases

We investigated the effect of maternal alcohol consumption on cell number, gangliosides and ganglioside catabolizing enzymes in the central nervous system (CNS) of the offspring. Virgin female rats of the Charles Foster strain were given 15% (v/v) ethanol in drinking water one month prior to conception and during gestation and lactation. At 21 days postnatal age, the offspring were sacrificed and the brains were separated into cerebrum, cerebellum and brain stem to investigate possible regional variations. Compared to controls, wet weight of cerebrum, cerebellum and brain stem, and of spinal cord was decreased in the pups exposed to alcohol. DNA and protein contents were also found to be lowered in all the CNS regions of the pups exposed to alcohol. Conversely, maternal alcohol consumption was found to increase the concentration and the content of total gangliosideN-acetylneuraminic (NANA) in CNS of the pups. In addition, alcohol treatment was found to induce alterations in the proportions of individual ganglioside fractions. Interestingly, these alterations are somewhat different than those observed in the neonatal brain and spinal cord of the pups subjected to prenatal alcohol exposure. The alterations in the proportions of ganglioside fractions were shown to be region-specific. Maternal alcohol consumption resulted in decreased activities of sialidase, β-galactosidase, β-glucosidase and β-hexosaminidase. The results suggest that the alcohol-associated increases in ganglioside concentration may be at least partly due to the decreased activities of ganglioside catabolizing enzymes.     

Recycling of silicone rubber waste: Effect of ground silicone rubber vulcanizate powder on the properties of silicone rubber

The silicone rubber vulcanizate powder (SVP) obtained from silicone rubber by mechanical grinding exists in a highly aggregated state. The particle size distribution of SVP is broad, ranging from 2 µm to 110 µm with an average particle size of 33 µm. X‐ray Photoelectron Spectroscopy (XPS) and Infrared (IR) Spectroscopy studies show that there is no chemical change on the rubber surface following mechanical grinding of the heat‐aged (200°C/10 days) silicone rubber vulcanizate. Addition of SVP in silicone rubber increases the Mooney viscosity, Mooney scorch time, shear viscosity and activation energy for viscous flow. Measurement of curing characteristics reveals that incorporation of SVP into the virgin silicone rubber causes an increase in minimum torque, but marginal decrease in maximum torque and rate constant of curing. However, the activation energy of curing shows an increasing trend with increasing loading of SVP. Expectedly, incorporation of SVP does not alter the glass‐rubber transition and cold crystallization temperatures of silicone rubber, as observed in the dynamic mechanical spectra. It is further observed that on incorporation of even a high loading of SVP (i.e., 60 phr), the tensile and tear strength of the silicone rubber are decreased by only about 20%, and modulus dropped by 15%, while the hardness, tension set and hysteresis loss undergo marginal changes and compression stress‐relaxation is not significantly changed. Atomic Force Microscopy studies reveal that incorporation of SVP into silicone rubber does not cause significant changes in the surface morphology.     

Characteristics and compositions ofCarissa spinarum,Leucaena leucocephala andPhysalis minima seeds and oils

The seeds and extracted oils ofCarissa spinarum (Apocynaceae), (I),Leucaena leucocephala (Leguminosae) (II) andPhysalis minima (Solanaceae) (III) were analyzed for characteristics and compositions. The seeds of I, II and III contained 22.4, 6.4 and 40.0% oil and 10.1, 27.6 and 17.9% protein, respectively. The oils of I, II and III had, respectively, iodine values 70.1, 113.5 and 122.5; saponification values 186, 188 and 189; unsaponifiable matter 5.2, 2.5 and 0.8%, and the following fatty acid compositions (area %): palmitic 12.6, 14.2, 10.5; stearic 7.6, 6.1, 8.6; oleic 72.7, 20.1, 17.3; linoleic 5.2, 53.8, 61.4; linolenic 0.9, 1.8, 0.0, and arachidic 1.0, 2.3, 0.0. II contained 1.7% lignoceric acid. III contained small amounts of hexadecenoic (0.1%), epoxy (0.6%) and hydroxy (1.5%) fatty acids.     

Synthesis and characterization of poly(urethane‐ester)s based on calcium salt of mono(hydroxybutyl)phthalate

Calcium‐containing poly(urethane‐ester)s (PUEs) were prepared by reacting diisocyanate (HMDI or TDI) with a mixture of calcium salt of mono(hydroxybutyl)phthalate [Ca(HBP)₂] and hydroxyl‐terminated poly(1,4‐butylene glutarate) [HTPBG₁₀₀₀], using di‐n‐butyltin‐dilaurate as catalyst. About six calcium‐containing PUEs having different composition were synthesized by taking the mole ratio of Ca(HBP)₂:HTPBG₁₀₀₀:diisocyanate (HMDI or TDI) as 3:1:4, 2:2:4, and 1:3:4. Two blank PUEs were synthesized by the reaction of HTPBG₁₀₀₀ with diisocyanate (HMDI or TDI). The polymers were characterized by IR, ¹H NMR, Solid state ¹³C‐CP‐MAS NMR, TGA, DSC, XRD, solubility, and viscosity studies. The T_g value of PUEs increases with increase in the calcium content and decreases with increase in soft segment content. The viscosity of the calcium‐containing PUEs increases with increase in the soft segment content and decreases with increase in the calcium content. X‐ray diffraction patterns of the polymers show that the HMDI‐based polymers are partially crystalline and TDI‐based polymers are amorphous in nature. The dynamic mechanical analysis of the calcium‐containing PUEs based on HMDI shows that with increase in the calcium content of polymer, modulus (g′ and g″) increases at any given temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1720–1727, 2006