A new write/erase method to improve the read disturbcharacteristics based on the decay phenomena of stress leakage currentfor flash memories

This paper describes a new write/erase method for flash memory to improve the read disturb characteristics by means of drastically reducing the stress leakage current in the tunnel oxide. This new write/erase operation method is based on the newly discovered three decay characteristics of the stress leakage current. The features of the proposed write/erase method are as follows: 1) the polarity of the additional pulse after applying write/erase pulse is the same as that of the control gate voltage in the read operation; 2) the voltage of the additional pulse is higher than that of a control gate in a read operation, and lower than that of a control gate in a write operation; and 3) an additional pulse is applied to the control gate just after a completion of the write/erase operation. With the proposed write/erase method, the degradation of the read disturb life time after 10⁶ write/erase cycles can be drastically reduced by 50% in comparison with the conventional bipolarity write/erase method used for NAND type flash memory. Furthermore, the degradation can he drastically reduced by 90% in comparison with the conventional unipolarity write/erase method fur NOR-, AND-, and DINOR-type flash memory. This proposed write/erase operation method has superior potential for applications to 256 Mb flash memories and beyond     

Adaptive space-time reduced-length MMSE receiver for interferencesuppression in DS/CDMA

The authors present an adaptive space-time reduced-length minimum mean-squared error (MMSE) receiver to suppress co-channel interference in the near-far environment for an asynchronous direct-sequence code-division multiple-access (DS/CDMA) system. Simulation results show that better bit-error rate and faster and more stable convergence are achieved over the existing full- and reduced-length MMSE receivers     

Experimental study on a quasi-optical mode converter for transforming the whispering-gallery mode into a circularly polarized hollow radiation beam

An experiment was carried out for transforming the 120 GHz-TE_12.2 whispering-gallery mode (WGM) into a circularly polarized hollow radiation beam. A hollow beam was formed by reflecting the WGM, which was radiated from a 16 mm radius circular waveguide cut, with an annular mirror having suitable local normal vectors. The experimentally observed field intensity profiles of the reflected wave were in good agreement with calculated results.     

Model for the potential barrier depth along the grain boundaries of an ultrathin tin dioxide gas sensor

A potential barrier model along the grain boundaries in ultrathin tin dioxide (SnO₂) gas sensors is presented. It is assumed that the negatively charged oxygens are adsorbed only on the grain boundaries. The potential barrier depth is expressed as functions of grain size, donor concentration and surface coverage of adsorbed oxygen ions at the boundaries. A direct consequence is that the conduction electrons are effectively confined in a grain when the film thickness becomes smaller than a critical value. This indicates a drastic increase in resistivity with decreasing film thickness in air, and thus an occurrence of an extremely high gas sensitivity.     

Optoelectronics in satellite designs

Design of artificial satellites for communication, remote sensing and scientific investigations follows, at present, a fixed pattern based on existing and proven technologies and the requirements of payload or experiment within the constraints of weight, volume and power available. The advances in optoelectronic components and systems have opened up a new dimension in designing satellites of the future, incorporating new technologies. This paper deals with general satellite design concepts based on optoelectronic systems wherever applicable.     

Micro-Raman spectroscopy study of the process of microindentation in polymers

The residual deformation produced by Vickers microindentations in poly(3,3-dimethyl oxetane) (PDMO) was analysed by Raman microspectroscopy. Microstructural variations were observed as the Raman spectra were recorded at different positions along and out of the microindentation. A gradual distribution of the monoclinic and orthorhombic structures arises as the spectra were scanned from the centre to the edge of the impression area. This crystalline variation in PDMO, which reflects the degree of stress present on the surface of the sample, was utilized to obtain information on the distribution of pressure in and around the microindentation. In addition to the clear variation of pressure inside the permanently deformed region, no crystalline transformation was noted out of the impression area. Similar features were observed when the Raman spectra were recorded along one of the diagonals of the indentation.     

A mathematical model for the prediction of temperature in a dry snow layer

A mathematical model for predicting the temperature in a homogeneous layer of dry snow is presented. The model, which is physically based, is capable of predicting diurnal temperature behaviour at the snow surface and at any depth within a snow layer given the variation in a limited set of meteorological parameters over that period. A sensitivity analysis is performed to determine the important parameters in the prediction of snow surface temperatures. These are found to be consistent with simple physical reasoning.     

A transgenic T cell receptor restores thymocyte differentiation in interleukin-7 receptor alpha chain-deficient mice

Traffic accidents are a well-known public health problem worldwide. In Mexico research into risk factors for motor involving vehicles accidents and their consequences has recently been taken into account. The relevant literature does not normally describe the methodological aspects involved in the collection of primary data, since most studies have used secondary data the good quality and validity of which are assumed. The paper presented seeks to discuss and share with researchers in this field, some of the methodological aspects to be considered in the attempt to recreate the scene of the accident and obtain information approximating to reality. The measurements in situ of, such traffic accident variables as injury, use of seat belt, speed and alcohol intake are discussed.     

Persistent caching: an implementation technique for complex objectswith object identity

Many recent complex object database systems support the concepts of object identity and object identifier. Following an object identifier to access the referenced object is called navigation operation and is an essential operation in dealing with complex objects. Navigation operation is a difficult operation to implement efficiently since every navigation operation inherently causes one disk access operation. A scheme to notably accelerate the navigation operation among a sea of complex objects, by increasing the effective number of objects in one disk page is proposed. The main concept of the presented technique is threefold. The first idea is to store a cached value within a complex object that is referencing another complex object. The second is that when the referenced object is to be updated the update propagation is delayed until the time when the cached value is referenced. The third is to utilize a hashed table on main memory to efficiently validate the consistency between the cached values and the original values